Welcome to tender impulse

 Kosovo  Tenders 2017/18

<<Back
SrNo. Description Deadline Date
1 Construction of approximately 31 km of motorway and ancillary infrastructure to TEM design standards 11/11/2018
2 "Battery for UPS" 01/12/2017
3 Supply of Boots for Workers of the Fire Brigade 27/11/2017
4 "Supply with Certificates for NCKs Needs" 27/11/2017
5 "Supply and installation of 35 kV circuit breaker at TS Mazgit" 25/11/2017
6 Vehicle Monitoring and Vehicle Management System Through GPS 24/11/2017
7 Supply with machine for security of numbering and banknote detection 24/11/2017
8 Supply with telecommunication equipment and microscope 15/11/2017
9 "Supply and installation of 35 kV circuit breakers in TS Mazgit" 14/11/2017
10 Supply and installation of heating equipment in the Biblotekes Hall Ibrahim Rugova 12/11/2017
11 Supply with VOiP Telephone Adapters cisco 10/11/2017
12 Supply with Certificate of Origin EUR 1 09/11/2017
13 SUPPLY WITH CHIP CARD 03/11/2017
14 SUPPLY WITH THE GENERATOR AND THEIR EXTENSION OF THE SCHOOLS OF GRADES, DEGREES AND THE POLLUTION 03/11/2017
15 "Supply and installation of 35 kV circuit breakers in TS Mazgit" 31/10/2017
16 Supply with equipment for surveillance of inputs and outputs and identification cards 30/10/2017
17 Supply and Installation of 100KVA Transformer at the Kastriot Pump Station 29/10/2017
18 Vehicle Monitoring and Vehicle Management System Through GPS 25/10/2017
19 Supply with machine for counting security and detecting banknotes. 24/10/2017
20 Industrial battery for UPS, mounting them 23/10/2017
21 Election Forms for Local Elections 2017 22/10/2017
22 Supply with 50 UPS batteries for Municipalitys needs 21/10/2017
23 Supply of certificates for KRV 21/10/2017
24 REPLACEMENT OF TWO UPS IN ADMINISTRATION- BREAKING 20/10/2017
25 "Supply of printing materials (Photocopies, Blocks, Cards, Posting of advertisements) etc." 20/10/2017
26 Geological Survey of Land in Korishe / Prizren Village 16/10/2017
27 Regulation of sewerage and water supply at str. "Brothers Veseli" in Vushtrri 15/10/2017
28 Supply of ID cards and other technical equipment for printing, as well as some technical equipment for Municipality and School 14/10/2017
29 Printing brochures and folders 08/10/2017
30 Supply with RFID Card 08/10/2017
31 "ID Card Recorder and Chip ID Card" 05/10/2017
32 Horizontal and vertical signage of the roads in the Municipality of Kacanik 04/10/2017
33 SUPPLY WITH CHIP CARD 03/10/2017
34 Upgrade and modify of existing components of the Security System at the Regional Headquarter (RHQ) in Mitrovica 1. Perimeter Intrusion Detection System 2. Vehicle Access Control System 4. CCTV Surveillance System 5. Fire Detection System 6. Building Intrusion Detection System 8. Public announcement system PA 2. Construction of bi-folding gate and bulletproof door and windows in reception building 02/10/2017
35 Supply with IP Telephones and Related Equipment 02/10/2017
36 Supply with fire extinguishers 02/10/2017
37 Supply, installation and maintenance of the surveillance camera system at CRC - Lotus II 01/10/2017
38 Supply of garbage and vehicle maintenance materials 30/09/2017
39 Supply B52 Njoft.NEN.KON.ID KARTELAVE.doc printer ID 30/09/2017
40 Vehicle Monitoring and Vehicle Management System through GPS 25/09/2017
41 Supply VoIP Telephone Adapter Cisco 15/09/2017
42 "Supply with Certificate of Origin EUR 1" 13/09/2017
43 Purchase and installation of cameras in public places in Decan 12/09/2017
44 SUPPLY WITH TRAFFIC TICKET TICKET BOOKS AND BOOKS OF ACCESSORY COMMUNICATION REPORTS 07/09/2017
45 Supply with ETHERNET SWITCH INDUSTRIAL for communication with SCADA System 04/09/2017
46 LASER SUPPLY / WORK RADAR 01/09/2017
47 Supply with Invoice 01/09/2017
48 Provide, deliver and install X-RAY Inspection System (Baggage Screening) to OSCE Mission in Kosovo Headquarters 30/08/2017
49 Vehicle monitoring and management system through GPS for RWC vehicles "CABRATI" sh.a. 29/08/2017
50 SUPPLY WITH CHIP CARD 28/08/2017
51 River bed regulation and reconstruction of the existing bridge 26/08/2017
52 The Supply and Installation Supply and Installation of the Traffic Signalling in Merdare/ Merdare Common Crossing Point 21/08/2017
53 Telecommunication Services 20/08/2017
54 Maintenance and servicing of MAFRD generators 19/08/2017
55 SUPPLY WITH TRAFFIC TICKET TICKET BOOKS AND BOOKS OF COMMUNICATION ACCIDENTS REPORTS 16/08/2017
56 TONER SUPPLY FOR PRINTER PART 1 11/08/2017
57 Supply of anti-bullet vest 11/08/2017
58 Floor Washing Machine 11/08/2017
59 Vehicle Monitoring and Management System through GPS 10/08/2017
60 "Traffic Signal Supply" 07/08/2017
61 Supply toner for printers and photocopiers 05/08/2017
62 Supply with Security Certificates SSL 05/08/2017
63 Maintenance of sewerage and sanitary nodes on the territory of the Municipality of Deçan 03/08/2017
64 Delivery and installation of security cameras and other equipment within Gjilan and the outskirts of Vitina, Kamenica and Novi Brdo. B05 Contract Notice.docx 01/08/2017
65 Installation of internal network and external water supply and sewage, setting tiles and repair the electricity 28/07/2017
66 Supply material to installation of water meter 27/07/2017
67 SUPPLY headset 27/07/2017
68 Regulation of the sewage network in the Primary School "EnverHadri" in the village. Smrekonice 25/07/2017
69 Replacement of water meters and connection to the water supply for ZP Millosheve 24/07/2017
70 Supply systems for access control 23/07/2017
71 SUPPLY OF EQUIPMENT FOR FIRE 14/07/2017
72 Supply Sticker for license plates 06/07/2017
73 The Supply and Installation of ICT, CCTV and Radio Communications in Merdare/ Merdare Common Crossing Point 03/07/2017
74 Supply Anllaser for fire truck (BMC) 30/06/2017
75 Supply of toners for printers and photocopiers 29/06/2017
76 GPRS services (100 MB) for Vehicle Monitoring needs AKKVP-that 25/06/2017
77 "Supply of fire extinguishers object of the NAO" 24/06/2017
78 The printing of ballots for early parliamentary elections in 2017 23/06/2017
79 Pressing badge for early parliamentary elections in 2017 22/06/2017
80 Providing ambulance with a medical team (doctor, technician) to pool Germia. 22/06/2017
81 Supply of material for printing the ID Card 21/06/2017
82 Supply and installation of traffic signs 12/06/2017
83 Supply of parts for the armored vehicle Nissan Patrol Trascco 03/06/2017
84 Supply printer toner 02/06/2017
85 Supply of spare parts for motor vehicles TOYOTA LAND CRUISER 120 TOYOTA 4RUNNER, TOYOTA LAND CRUISER 150 TOYOTA LAND CRUISER AND BLIND 29/05/2017
86 Supply of two lawnmowers for Vocational Training Center - Pristina (VTC) and shelter for housing Victims of Trafficking (SPSVT) 27/05/2017
87 Valide tickets to participate in training in Sweden 21/05/2017
88 Supply of ambulance 17/05/2017
89 Providing ambulance with a medical team (doctor, technician) to pool Germia. 12/05/2017
90 Supply work gloves 08/05/2017
91 Supply of toners for photocopiers, printers and pllotera to AKM. 06/05/2017
92 Buying a truck 05/05/2017
93 Supply four (4) Special kiper tipper trucks for garbage (used) 05/05/2017
94 TONER SUPPLY AND MATERIAL OFFICIAL 05/05/2017
95 Supply of printer toner for the MPA needs 04/05/2017
96 "Supply of thermal paper for fetal monitor" 04/05/2017
97 Supply of metal badges 02/05/2017
98 Supply of equipment and network parts and microwave antennas 02/05/2017
99 Supply of womens shoes 25/04/2017
100 Supply of Excavators and wheel excavators with rubber chain. 21/04/2017
101 Supply of envelopes and printing applications for the registration of voters abroad 20/04/2017
102 Supply of original toner cartridges for the needs of North Mitrovica 19/04/2017
103 Supply demontimidhe installation switchgear 35kv 18/04/2017
104 Supply of personal protective equipment 18/04/2017
105 "Supply plates per 9200 SBC (Session Border Controller" 18/04/2017
106 Transport services ticket -Buying abroad 17/04/2017
107 Supply Toner 15/04/2017
108 Supply of explosives 14/04/2017
109 Supply of different forms, labels, envelopes different packaging for parcels, bags and sacks connecting service to the needs of domestic and international mail 13/04/2017
110 SUPPLY AND INSTALLATION OF FIRE ALARM AND FACILITIES IN VIOLATION OF KP 13/04/2017
111 Solar System Installation at UNMIK MHQ 08/04/2017
112 Supply of steel ropes 07/04/2017
113 Supply of X-ray scanner and detector 06/04/2017
114 Supply and maintenance of fire extinguishers 06/04/2017
115 BUILDING MANAGEMENT SYSTEM 06/04/2017
116 Supply of metal detectors 05/04/2017
117 TONER SUPPLY AND MATERIAL OFFICIAL 04/04/2017
118 Construction of tactical training ranges - KSF barracks in FERIZAJ 03/04/2017
119 Freight services seized for Kosovo Customs needs 29/03/2017
120 Supply of toners for photocopiers, printers and pllotera for KCA. 29/03/2017
121 SUPPLY TO SIGN FOR TRAFFIC NEED EMERGENCY 26/03/2017
122 Supply with tickets for Laura "Came" at the entrance to Germia and parking behind the Youth and School MU "Ali Sokoli" 26/03/2017
123 Supply of equipment for the Fire Within GJ.TH. facilities Gjilan with branches 25/03/2017
124 Supply of retaining barriers for passage 25/03/2017
125 Supply "Equipment for traffic Police Force" for the needs of KSF 24/03/2017
126 Toner Supply 24/03/2017
127 Supply card reader for book library "Naim" in Vushtrri 24/03/2017
128 Office supply of materials and Toner 23/03/2017
129 Providing service clearance of postage stamps and philatelic products for export regular and temporary during 2017 23/03/2017
130 Supply with toners 23/03/2017
131 Supply parts for NEW HOLLAND T6030 tractor Z9BD07030 multifunctional 22/03/2017
132 Supply reflective vest (VEZULLUS) and gloves 17/03/2017
133 Supply of one (1) kiper used trucks 13/03/2017
134 Supply and badge holders tie for Police Officers - Part 2 12/03/2017
135 Supply toner needs of University of Prishtina "HasanPrishtina" 10/03/2017
136 Supply ID cards 08/03/2017
137 Supply toner needs Masht_it 06/03/2017
138 Supply system for entry - exit and video surveillance 03/03/2017
139 "Supply llamella for loaders (Loader) T2GH and vetëngarkuesit (autoloader) LM56". 03/03/2017
140 Supply toner needs OPRK 24/02/2017
141 "Supply with toners". 24/02/2017
142 Supply and installation of pjaisjeve Hub staff registration system TAS (Time Attendance System) facilities Telecommunications of Kosovo JSC 17/02/2017
143 Supply and installation of camera DVR-ve 16/02/2017
144 AKKVP supply-stamp 16/02/2017
145 Supply boots 14/02/2017
146 Supply with mechanical winch with ropes and chains 14/02/2017
147 PRINTER TONER SUPPLY FOR KOLOR 09/02/2017
148 Supply ID cards 08/02/2017
149 Materijal office supply and toners 08/02/2017
150 Supply of toners for printers and photocopiers for the needs of Kosovo Prosecutorial Council 07/02/2017
151 Supply four (4) special garbage trucks for 1.1m³ containers (used) 04/02/2017
152 Toner supply - Ritender 2 02/02/2017
153 Supply Drum and Toner for Xerox Color C60 Printer 02/02/2017
154 Supply Drum and Toner for Color Printer Xerocs 29/01/2017
155 Supply of circuit breakers, electric bulbs, neon lights, fuses etc. 28/01/2017
156 Supply security cameras 28/01/2017
157 Toner Supply 27/01/2017
158 Toner supply / needs of MF 27/01/2017
159 The supply of postage stamps, FDC, philatelic and blocks all told over the years 2017/2018/2019 promotional products 26/01/2017
160 Supply car for banknotes counting and detection of security 26/01/2017
161 Druma supply for printer toner Bizhub c554e 24/01/2017
162 Supply of one (1) truck used for special waste containers 1.1m³ supply one (1) truck used for special waste containers 1.1m³ 24/01/2017
163 Supply rolls and toner plloter. 23/01/2017
164 Supply and Installation of Camera and DVR " 23/01/2017
165 "Supply of Toner for Dell 2150cn printer-color" + HP P2035 " 23/01/2017
166 Supplies for the passenger information system 23/01/2017
167 "SUPPLIES- PURCHASE garbage truck (used)" 23/01/2017
168 Toner supply 22/01/2017
169 Supply of ID cards 22/01/2017
170 Supply of ID cards 22/01/2017
171 Jokthyese supply valves for pneumatic pumps 22/01/2017
172 Supply of valves and spare parts for valves 22/01/2017
173 Supply for Cisco VoIP telephone handsets 20/01/2017
174 SUPPLY OF EQUIPMENT FOR CONTROL PEOPLE, BAGGAGE AND VEHICLES RI-TENDER 20/01/2017
175 ENFORCEMENT SYSTEM FOR AUTOMATIC FIRE DETECTION 10/01/2017
176 Fire extinguishers SUPPLY, INSTALLATION AND REVIEW OF THE CURRENT SYSTEM FOR EXTINGUISHING 10/01/2017
177 Supply and installation of surveillance cameras 09/01/2017
178 Supply Truck / Trailer Shleper used tipper with 09/01/2017
179 Toner supply 09/01/2017
180 Supply of color toner for printer HP M522 07/01/2017
181 Supply with toners for photocopiers 07/01/2017
182 SUPPLY WITH WEAPON FOR KP. 30/12/2016
183 System monitoring services to breakage-theft alarm and intervention with three mobile patrol unit of the Centre for Social Work 28/12/2016
184 Construction of a new fence in SS Prishtina 3 and perimeter protection system and video surveillance 27/12/2016
185 Supply, installation, monitoring, review and release Transformers 26/12/2016
186 Supply of the metal security paper for elementary school BrankoRadicevic 25/12/2016
187 Supply Sef (Arke) for providing stamps NjAD (Archive) dimensions 400x400 25/12/2016
188 Supply and installation of surveillance cameras 25/12/2016
189 SUPPLY AND INSTALLATION OF FIRE ALARM AND IN VIOLATION OF FACILITIES KP 23/12/2016
190 Supply of ID cards for employees 23/12/2016
191 Supply of fire protection equipment for the needs of the Pharmacy Institute 22/12/2016
192 Supply radar (laser) hand 20/12/2016
193 Provision and installation of ballistic doors and windows in UNMIK MHQ compound and Mitrovica RHQ 20/12/2016
194 Printing of training manuals for elections for Mayor in Glogovac 16/12/2016
195 Supply and badge holders tie for police officers 15/12/2016
196 Supply camera DPU-414 thermal printer for Laboratory in FMC. 15/12/2016
197 Supply reflective vest (VEZULLUS) and gloves 13/12/2016
198 Supply and installation of power circuit breakers 12/12/2016
199 Printing of ballots for elections for Mayor in Glogovac 12/12/2016
200 Providing two vehicles PIK TPL, TPL Plus and Full Casco 10/12/2016
201 Supply toner and printing ID cards for Zebra 08/12/2016
202 Supply of seals and stamps for elected airbags extraordinary Mayoral in Glogovac 04/12/2016
203 Supply clothing for firemen-shoes 02/12/2016
204 External supply black vest with inscription POLICE 01/12/2016
205 Supply detector bank tellers banknotes needs 01/12/2016
206 Implementation of the system of surveillance cameras 01/12/2016
207 Supply of spare parts for armored vehicles RENAULT TRUCKS to Kosovo Police 01/12/2016
208 Supply with uniform for duty tactical 01/12/2016
209 Supply nji (1) mini loaders (BUB-CAT) - (excavator) used 26/11/2016
210 Fire Department uniforms 25/11/2016
211 Supply of equipment of road traffic accidents Needs to Fire 25/11/2016
212 Supply and installation of mechanisms for driving the regulator voltage power transformers 24/11/2016
213 Supply and installation of mechanisms for driving the regulator voltage power transformers 24/11/2016
214 Supply of ammunition 19/11/2016
215 Supply and installation of vehicle 19/11/2016
216 Supply of ammunition 19/11/2016
217 Supply nji (1) special truck for garbage containers vetngarkues 7m (used) 19/11/2016
218 Purchase of firefighting equipment for the needs of the fire station in ZubinPotok 18/11/2016
219 Supply of clothing for firefighters 18/11/2016
220 THERMAL SUPPLY binoculars 18/11/2016
221 Supply medal 14/11/2016
222 Supply of paper for printing barcodes and power adapters for laptop 14/11/2016
223 SUPPLIES FOR FEMALE civilian clothes 14/11/2016
224 VOIP telephone system governing 12/11/2016
225 Supply and installation of cameras 12/11/2016
226 Supply with armored door for archive FIEK 12/11/2016
227 Supply weapons and ammunition to the SCA Part 1: Supply of weapons 11/11/2016
228 Supply of furniture - (the office, beds, cozy) 11/11/2016
229 Supply weapons and ammunition to the SCA Part 1: Supply of weapons 11/11/2016
230 Insurance services of the facility to KLMC 11/11/2016
231 "The development of e-registry and supply apostille seals stickers" 09/11/2016
232 Supply four (4) special garbage trucks for 1.1m containers (used) 08/11/2016
233 KOSTT (the Borrower or the Company) the electricity transmission system operator (TSO) in Kosovo intends using the proceeds of a loan from the European Bank for Reconstruction to enable KOSTT to achieve full compliance with the N-1 electricity transmission grid security criteria 03/11/2016
234 "Supply with vehicle registration number plates" 30/10/2016
235 Press material supply (certificate) 29/10/2016
236 Supply of IT Equipment (routers, firewall and VoIP Phone) for Diplomatic and Consular Missions of RKS 29/10/2016
237 Supply truck without the construction (used) 28/10/2016
238 BLOOD SUPPLY bag 27/10/2016
239 SUPPLY OF EQUIPMENT FOR CONTROL PEOPLE, BAGGAGE AND VEHICLES 27/10/2016
240 Supply berets and badges for berets 27/10/2016
241 Supply vehicle (jeep) 4x4 tactical and tactical ambulances 14/10/2016
242 Supply of three (3) special garbage trucks (used) 14/10/2016
243 The supply of ammunition and other self-defense 11/10/2016
244 "Supply of uniforms and accessories for diving for Task Force needs of KSF" 09/10/2016
245 Supply of ID cards, ribona and accompanying material for UMIB's needs 08/10/2016
246 Supply and installation of optical cable in new FMC, CSW and the municipality building 07/10/2016
247 "The supply of ammunition and other self-defense" 07/10/2016
248 250kW transformer placement and inclusion in the power supply to ss. "EminDuraku" 03/10/2016
249 Supply of vacuum circuit breakers 2500 A 26/09/2016
250 RFID cards for entrance and exit 26/09/2016
251 "Upgrading and modification of application ID cards, application synchronization with HR (HRMIS) and other systems" 25/09/2016
252 SUPPLY SECURITY EQUIPMENT (ACCESS CONTROL) 24/09/2016
253 Regulation of security cameras in the city of Prizren 23/09/2016
254 "Patrimi Emergency vehicles and Directorate" 22/09/2016
255 Supply of fire extinguishers 21/09/2016
256 "Supply of paper for Diploma" 20/09/2016
257 Supply of ID cards 14/09/2016
258 Supply and installation of cameras 10/09/2016
259 SUPPLY AND ASSEMBLY OF BARRIERS (Laura) ELECTRONIC 08/09/2016
260 Dredging and riverbed of rivers 05/09/2016
261 "The development of e-registry and supply apostille seals stickers" 05/09/2016
262 Supply blocks and certificates for employment participation 03/09/2016
263 Supply of buses for the Kosovo Police 02/09/2016
264 Supply of three (3) special garbage trucks (used) B05 Contract Notice -Shqip.docx 31/08/2016
265 Dron aircraft supply 31/08/2016
266 Establishment and maintenance of traffic signs in the streets of the Municipality of Peja 31/08/2016
267 Solar installation in FMC-1 159 solar installation in QMF 1.docx 29/08/2016
268 Construction of high-voltage power line 29/08/2016
269 Buying three tickets to Antalya route Pristina and vice versa 29/08/2016
270 Supply of Stamp 29/08/2016
271 Supply and installation of Access Control in PRB Notice signing kontrats.docx 28/08/2016
272 Video surveillance in the municipality of Zvecan 28/08/2016
273 Arms supply to KP and the state flags 28/08/2016
274 Maintenance of apparatus for time management (accescontrollor) through municipal director 28/08/2016
275 Supply with uniform for duty tactical 26/08/2016
276 Ambulance Regulation (VWT5) damaged 26/08/2016
277 MAKING OF WASTEWATER in village neighborhoods ,, Jahaj, Kapllanaj, Pacaj, Tupa MZEZ AND MAKING OF WASTEWATER IN DRENOC.docx 25/08/2016
278 Objktit ambulance building of family medicine in Brad B05 Kontrate.docx Press 24/08/2016
279 Security Equipment Supply (Access control) 24/08/2016
280 Transfer installation review and commissioning of the transformer at the Palace of Justice Legrand 23/08/2016
281 Supply weapons and ammunition to SCA 22/08/2016
282 Supply weapons and ammunition to SCA 22/08/2016
283 "Supply of bullet proof glass" Notice of contract signing . 22/08/2016
284 Supply of special equipment for transfer of explosives, anti costume bomb detector for explosives, gun battery, for standing for glock Folding cases. 19/08/2016
285 "Supply of digital cameras and camera security for AKF, DCAM and DRPR" Lot 1: supply and installation of security cameras (DCAM, DRPR) Lot 2: Supply with cameras and digital cameras (DCAM and AKF) 19/08/2016
286 SUPPLY OPERATIONAL AND AMMUNITION FOR EXPLOSIVES DIZRAPTER 18/08/2016
287 Barriers supply 18/08/2016
288 SUPPLY - PURCHASE EE garbage truck 16/08/2016
289 SUPPLIES FOR FEMALE civilian clothes 15/08/2016
290 Supplying medical-dental chair" -RITENDER announcement on signing the contract - Supply of medical equipment-Chairs dentare.doc 15/08/2016
291 Supply with cameras and electronic management system next "Supplying Lot 1- and camera management system 14/08/2016
292 "Printing of gratitude in the form of a check for the price" journalist writing / show or best chronicle diaspora " B52 Notice of contract-signing 03.08.2016.doc

13/08/2016
293 "Printing of gratitude in the form of a check for the price" 13/08/2016
294 "Supply passports, ID cards, driving licenses and maintenance of their systems" 11/08/2016
295 Supply Surveillance 1. B52 Press for signing the contract SUPPLY WITH CAMERA VEZHGUESE.docx

11/08/2016
296 Supply of uniforms and accessories for diving for the Task Force needs KSF 10/08/2016
297 Installation of surveillance cameras at the primary school in the village of Restelica - RETENDERING 10/08/2016
298 The expected results will be achieved through targeting of key institutions such as Kosovo Police, Financial Intelligence Unit, prosecutors, judges, the Agency for Managing the Sequestrated and Confiscated Assets and others and their institutional mechanisms in the overall fight against money laundering and corruption with focused capacity-building activities. 09/08/2016
299 Supply of two (2) waste compactor trucks for 1.1m containers with 00 km 09/08/2016
300 Replacement of water supply in the village Gak - Ferizaj and Kaqanik Dushkaj- neighborhood. 08/08/2016
301 Supply of ammunition 05/08/2016
302 '' Funrizim armored vehicles divided into two parts - Lot for the needs of KSF '' LOT I - '' Supply with armored vehicles -cobra 'LOT II -' Supply of 4x4 armored tactical vehicles' 05/08/2016
303 "Supply of RFID antennas testueses" 05/08/2016
304 Supply and installation of Access Control 02/08/2016
305 Supply weapons to KP 01/08/2016
306 Nissan vehicle servicing Trascco (armored) re Quotation II 30/07/2016
307 Supply vest anti - bullet 29/07/2016
308 The Safety Camera SUPPLY AND ASSEMBLY IN MALISHEVA 29/07/2016
309 "Construction of 1 (a) of the Common System for Drinking Water Supply for 25 (twenty five) villages in Vushtrri." 28/07/2016
310 Construction of water supply systems in the Municipality of Rahovecit..docx 27/07/2016
311 Supply of Ambulance and vehicles" 25/07/2016
312 VOIP telephone system GOVERNMENT 22/07/2016
313 Arms supply to KP and the state flags -Rikuotim 21/07/2016
314 Supply of explosives and ammunition dizrapter operational 20/07/2016
315 SUPPLY LIGHT FOR VEHICLES KP 20/07/2016
316 The supply of applications for managing the budget of Kosovo Customs" 19/07/2016
317 Supply thermal binoculars 18/07/2016
318 Construction of fencing in FMC s in Skenderaj municipality L = 195m-Ritendering 15/07/2016
319 Supply of vacuum circuit breakers 2500 A 15/07/2016
320 Supply and installation of cameras 12/07/2016
321 Supply of equipment security and riot control of KCS institutions 11/07/2016
322 Construction of road from the village Arber (Leskovec) to Qeshm Pasha 08/07/2016
323 Road construction and land siege of the Caves in Prizren Muradem 08/07/2016
324 The infrastructural construction of roads, sewage and fecal weather in Iber-Coofinancing field with MAPL 07/07/2016
325 Rehabilitation of water supply systems (rehab.i water supply networks, rehabilitation of reservoirs, STAC. Pumping, sisi.dezinfektimit, equipment, water pumps and professional mbikqyerja) 07/07/2016
326 Construction of the road (phase I) in the village Barain 06/07/2016
327 Supply with vehicle registration number plates 05/07/2016
328 "Upgrading and modification of application ID cards, application synchronization with HR (HRMIS) and other systems" 05/07/2016
329 ROAD CONSTRUCTION AND PAVING DRENOVAC - Zatriq 04/07/2016
330 Construction of roads inside the villages of Upper Low Godanc, neighborhood, Carralev, Muzeqin, Qorr segment in the municipality of Shtime Ilazi 04/07/2016
331 Construction of the bridge in the village of Deva. 04/07/2016
332 Buying re-tender II vehicles for municipal administration of Ferizaj Lot-I- 2 (two) 4 + 1 seat car Lot-II 1 (a) 4x4 jeep Lot-III 1 (a) 8 + 1 seats nation-Lot IV- 1 (a) Minibus 21-24 seats 04/07/2016
333 "Road Rehabilitation Kramovik - Xrx" 30/06/2016
334 Installation of surveillance cameras at the primary school in the village of Restelica 29/06/2016
335 Arms supply to KP and the state flags -Rikuotim 29/06/2016
336 Construction of the road and alleys water factory in Pleshin- three-year project 28/06/2016
337 Transfer installation review and commissioning of the transformer at the Palace of Justice Legrand. 28/06/2016
338 Supply ID cards 28/06/2016
339 Construction of Road ,, Bishtazhint, K. Gjakova 27/06/2016
340 Construction of roads inside the village Rashnicw 27/06/2016
341 Construction of water supply system in Dragash-works sequel 27/06/2016
342 "Construction of the road: Qaf Duhl - Topilla - Grajqevc - Papaz" 26/06/2016
343 Construction of the road: Qaf Duhl - Topilla - Grajqevc - Papaz" 26/06/2016
344 Construction of roads in the village of Prizren Shkoz
24/06/2016
345 Construction of local roads and sewerage in the city of Prizren Hoq
24/06/2016
346 Construction of local roads and sewerage in the village of Prizren Krajk
24/06/2016
347 Road construction in L = 4760m Likovc villagers' 24/06/2016
348 Purchase and installation of security cameras. 24/06/2016
349 Buxhala Rexh road construction in Buzhala 23/06/2016
350 Supply vehicle (jeep) 4x4 tactical and tactical ambulances divided into two parts. 22/06/2016
351 Supply of digital cameras and camera security for AKF 21/06/2016
352 Of the sewage wastewater Bashkim Emini St ,, ,, ,, and Rr Mehmeti in the village. Vojnovc 21/06/2016
353 Project co - Construction of road from textile factories to the settlement of the village Mushtisht Sopaj 20/06/2016
354 "Development of software application modules-related that will integrate with existing application-InterTrace (to the Animal Identification and Registration) to the Food and Veterinary Agency" 20/06/2016
355 Construction of local roads and sewerage in the village Nashec Phase II 20/06/2016
356 Kadri Qollaku road construction and Ivory Rizah fangu Blace in Blace 20/06/2016
357 Reconstruction of the road "and Hamit Sala Jashari" in Skenderaj L-960k
20/06/2016
358 Construction of water supply system in the way Battle of Pashtrikut in Prizren Arban 17/06/2016
359 Construction of road and bridge in the village of Prizren Reqan 17/06/2016
360 Reconstruction, reconstruction and expansion of some secondary roads and reconstruction, improvement of primary and secondary fecal sewage. 17/06/2016
361 Construction of the bridge in the village. Plemetin 15/06/2016
362 Road construction Bukosh - Reqan - first phase 15/06/2016
363 Supply and installation of traffic signs 15/06/2016
364 Construction of the road and Wastewater St. "SADIKU" Fsh. Iber-Phase II field 14/06/2016
365 Construction and asphalting of the road in Upper Pataqan (neighborhood BELLAQVE) 13/06/2016
366 Supply and installation of traffic signs and horizontal marking 13/06/2016
367 Supply of paper with security safeguards 13/06/2016
368 Supply equipment gjeografik- GIS information system for the needs of KSF 10/06/2016
369 Building Bridges in UCE Shushica AND Kerrnine" 10/06/2016
370 Construction of the road in the village Vrrnic-Co with MI and the Municipality of Mitrovica. 10/06/2016
371 Colleges construction of roads in the municipality of Zubin Potok 09/06/2016
372 ROAD CONSTRUCTION AND PAVING MAMUSHE-Smaq-highway "- PHASE TWO 08/06/2016
373 Construction of local roads with concrete cement blocks 08/06/2016
374 "Vehicle monitoring services to Iber Lepenc via GPS" 08/06/2016
375 Maintenance of substation and generators - Ritender 2 07/06/2016
376 SUPPLY OF FORENSIC VOICE PROCESSING SOFTWARE AND TRAINING FOR THE SOFTWARE 07/06/2016
377 "Supply of vehicles of fire extinguishing and rescue" 06/06/2016
378 Supply of equipment security and riot control of KCS institutions 06/06/2016
379 Buying a used bus for transfer students strongly MA Dragash 06/06/2016
380 Road construction in First Tunnel by flotation to varrezat- side arm 2 and 3 06/06/2016
381 Construction of the road in the village settlement Koliq Qokaj 06/06/2016
382 Construction of 1 (one) Joint Drinking Water Supply System for 7 (seven) Villages in the Municipality of Suharek / Suva Reka and Supply and Installation of Bulk Water Meters and Customer Water Meters for Non-Revenue Water (NRW) Reduction in the. .. 06/06/2016
383 Ambulance in the neighborhood repair Nursery in the municipality of Peja 03/06/2016
384 Construction of fecal sewage (wastewater) in the city and villages 03/06/2016
385 Construction of the road lower settlement "generous" - Duhl 03/06/2016
386 Supply and installation of equipment in the substation 35 / 3.3KV 03/06/2016
387 LOCAL ROAD CONSTRUCTION RAMAJ UCE-neighborhood " 02/06/2016
388 Construction of the road "we Sinani" in Nishor 02/06/2016
389 Supply of a special vehicle equipment for the fire service in Prizren 02/06/2016
390 Construction of the bridge in the village Raqa location 02/06/2016
391 LOCAL ROAD CONSTRUCTION "MONASTERY Congress" in Istok 01/06/2016
392 Tow truck supply to 5T for the needs of KSF 31/05/2016
393 Road construction in DUGAJEVE - THE CHURCH 31/05/2016
394 ROAD CONSTRUCTION AND PAVING Ratkoc - BABOC 31/05/2016
395 Building-Paving the road in the village Zhub. 30/05/2016
396 Identities printer 30/05/2016
397 Construction of fencing in FMC s in Skenderaj municipality L = 195m 27/05/2016
398 Construction of road from the village center Luka Lower to the cemetery and the construction of irrigation canal 27/05/2016
399 Verejteje: kk.podujeva pub.tek fault of 19/05/2016-supply small equipment sector emergency fire service 27/05/2016
400 Module Supply of water meters and water meter Radio transceiver 25/05/2016
401 Traverza for rail supply 25/05/2016
402 "Construction of water supply for villages Cerrce, Lubozhd AND PRIGODE 24/05/2016
403 Suha road construction Doll - New Quarter 24/05/2016
404 Providing ambulance with a medical team (doctor, technician) for Germia pool. 24/05/2016
405 Supply and installation of traffic signs 23/05/2016
406 Rehabilitation of the Southern Part of Railway Route 10 19/05/2016
407 Construction of road infrastructure in the park Prizren economic Lubizhd
057 Construction of road infrastructure in the economic park Lubizhd Prizrenit.docx

19/05/2016
408 Construction of the bridge in the city (on the River Lab in park) 19/05/2016
409 SUPPLY OF IT EQUIPMENT (printers, scanners and equipment for counting and verification of banknotes) 18/05/2016
410 Construction of the sewage collector Batllav - Grdoc 18/05/2016
411 Supplying weapons and other equipment 18/05/2016
412 Construction of road and sewage in St. "KORA" 18/05/2016
413 ROAD CONSTRUCTION AND Rushi Elias MUHAMET Ally in Sopij 17/05/2016
414 Supply of paper with security safeguards 17/05/2016
415 "Supply of spare parts for circuit breakers in the Plant Electric Pump." 16/05/2016
416 Construction of the bridge in Upper Pakashtic 10/05/2016
417 ENFORCEMENT SYSTEM FOR AUTOMATIC FIRE detection 10/05/2016
418 Supply with uniforms for firefighters 09/05/2016
419 Small equipment supply sector emergency fire service 09/05/2016
420 Supply of equipment for emergency system lines and spare parts - new tender 06/05/2016
421 Supply and installation of optical cable in new FMC, CSW and the municipality building
B05 - 2016-059 - Notice Kontrate.docx
06/05/2016
422 Filling and supply of fire-fighting equipment for the needs of the student center 05/05/2016
423 Supply of equipment for KSF traffic 03/05/2016
424 Supply equipment VOIP phone system for the needs of KSF 29/04/2016
425 Maintenance points antennas 28/04/2016
426 VOIP telephone system GOVERNMENT 27/04/2016
427 Supply for ID cards 26/04/2016
428 Supply and installation of traffic signs 25/04/2016
429 Maintenance of fire fighting 22/04/2016
430 Electronic management system for vehicle-GPS. 20/04/2016
431 Supply and maintenance of fire-fighting apparatus 20/04/2016
432 Drafting of project implementation for wastewater collector (from the neighborhood Sahiti up on the asphalt road Podujevo - Dumnic)
B05 Kontrate.docx Press
19/04/2016
433 Supply of spare parts for circuit breakers in the Plant Electric Pump 15/04/2016
434 Supply of water meters for customers with holindera Fi 14/04/2016
435 Providing digital cards for entry - exit of workers at FMC 13/04/2016
436 CCTV SYSTEM AND FIRE PROTECTION IN THE BUILDING OF THE ASSEMBLY OF THE REPUBLIC OF KOSOVO 12/04/2016
437 Supply and installation of the card reader system (access control) 12/04/2016
438 Supplying parts for vehicles Mercedes-Benz B-180 Diesel, Opel Astra 1.9 CDTI, 1.7 CDTI Opel Astra, Peugeot 307 HDI 07/04/2016
439 Monitoring and maintenance of the alarm system, cameras and physical guards in post offices KP Lot 1 - monitoring and maintenance of the camera system, the post office PK.s Lot 2 - monitoring and maintenance system 31/03/2016
440 Equipment Supply Security Systems for the ICMM 31/03/2016
441 29 Supply of armor, helmets, gas masks, 01/2016 Police Equipment 30/03/2016
442 30 Supply Ammunition, explosives and gases 01/2016 30/03/2016
443 36 rifles Border Police 03/2016 30/03/2016
444 36 police Special Weapons and Equipment 03/2016 30/03/2016
445 35 armored limousines and special vehicles 04/2016. 30/03/2016
446 05/2016 18 Supply shoes 30/03/2016
447 Supply of equipment and maintenance of security systems in the DPD and AKF 25/03/2016
448 Implementation of the electronic management system of vehicles with GPS devices 23/03/2016
449 Supply and installation of stickers and logos on the vehicles of Kosovo Customs 16/03/2016
450 Supply of fire extinguishers 16/03/2016
451 Maintenance of security systems at DPD and AKF", including supply of equipment system CCTV's, Pass-IT Entra, Fire Alarm, scanner - X RAY, etc. metal detector. and maintenance of CCTV systems States, MS Access, Fire Alarm, Alarm in safes, etc. Back-up and the Access's programming software. 15/03/2016
452 Substation and generator maintenance 11/03/2016
453 Supply, Installation And Review Of The Current System Fire Extinguishing 10/03/2016
454 Supply of material for mining explosives 10/03/2016
455 Servicing and maintenance of vehicles to the hospital 09/03/2016
456 Filling and servicing of apparatus for firefighters to Prizren FMC 08/03/2016
457 Supply of digital meters for fuel KLMC 08/03/2016
458 Supply of thermal paper 04/03/2016
459 Supply of uniforms and protective work means 03/03/2016
460 Supply of fire apparatus 01/03/2016
461 Rehabilitation of 31.5 MVA Power Transformer, Rehabilitation of boxes of power transformers and supply and installation of batteries 29/02/2016
462 MAINTENANCE SYSTEM CCTV IP &
B05 Press Kontrate.docx
26/02/2016
463 Maintenance of Fire" 25/02/2016
464 Maintenance and supply of fire-fighting equipment 16/02/2016
465 TRANSMISSION LINES AND CABLES 09/02/2016
466 POWER TRANSFORMERS 09/02/2016
467 GIS Substations 09/02/2016
468 TRANSMISSION LINES AND CABLES: [110 KV SINGLE CIRCUIT LINE RAHOVECI - THERANDA], [110 KV DOUBLE CIRCUIT LINE AND CABLES FUSHE KOSOVA], [220 KV DOUBLE CIRCUIT LINE DRENASI 2] 09/02/2016
469 GIS Substations: [110/10(20) kV - Pristina 6 and 110 kV HIS in SS Pristina 4], [110 kV/10(20) kV - Fushe Kosova], [110 kV/10(20) kV - Mitrovica 2], [HIS in SS 110/10 (20) kV - Theranda] and [220/10(20) kV - Drenasi 2] 09/02/2016
470 POWER TRANSFORMERS: 2X40 MVA IN SS 110/10(20) - PRISTINA 6, 2X40 MVA IN SS 110/10(20) - FUSHE KOSOVA, 2X40 MVA IN SS 110/10(20) - MITROVICA 2 AND 2X40 MVA IN SS 220/10(20) KV - DRENASI 2 09/02/2016
471 Supply of payment vouchers, sheet Handover & Cards' 04/02/2016
472 Spare parts and maintenance of vehicles No 5 02/02/2016
473 Supply "bulletproof vest" for the needs of the Police Force KSF 25/01/2016
474 Supply Operational Explosives 22/01/2016
475 SUPPLY shoes and boots for workers KP - Ritender III (Part 2) 12/01/2016
476 Supply badges for hats and berets 08/01/2016
477 Maintenance of the electronic system for registration of vehicles and driving licenses" Lot 2 - Maintenance of electronic system-ritender Drivers License 30/12/2015
478 Supply of personal protective equipment at work Supply of personal protective equipment at work Lot 2 - working clothes and lots antistatic football 3 - Safety Helmets, gloves Lot 4 - working sleeved gown, protective caps, vests, jackets, Kombil 29/12/2015
479 Supply of clothes - epaulets 29/12/2015
480 Filling, servicing of fire extinguishers and adequate supply pipes for hydrants in health facilities 22/12/2015
481 The overall objective of the project is to increase economic growth and private sector employment in Kosovo, by strengthening the competitiveness of locally operating enterprises and promoting Kosovos integration into the world economy. 21/12/2015
482 Supply For Kp Monicion 16/12/2015
483 Testing and filling of fire extinguishers 15/12/2015
484 Power supply 100 KVA substation 15/12/2015
485 Filling, servicing of fire extinguishers and adequate supply pipes for hydrants in health facilities 15/12/2015
486 Supply of equipment and maintenance of security systems at GDC 10/12/2015
487 Supply of uniforms for workers KP 09/12/2015
488 Filling and servicing of fire extinguishers at FMC 08/12/2015
489 Programming, supply and installation of automatic biletimit system at the entrance of a public park 07/12/2015
490 Revilatizimi of Substation 110kV, 35kV side (SS Gjakova 1, Gjilan and Ferizaj 1 1) 04/12/2015
491 Power supply 100 KVA substation 03/12/2015
492 Servicing and maintenance of the system of cameras in high-security prison 02/12/2015
493 Supply of Shoes and boots for workers KP - Ritender II (Part 2) 01/12/2015
494 Supply With Bullet Proof Vest And Masks 30/11/2015
495 Revtlalizimi of Substation 110kV, 35kV 23/11/2015
496 Revilatizimi of Substation 110kV, 35kV side (SS Gjakova 1, Gjilan and Ferizaj 1 1) 16/11/2015
497 Supply with long arms for Kosovo Police-RETENDER 13/11/2015
498 Long Arms Supplies To Kosovo Police 13/11/2015
499 SUPPLY WITH POLICE EQUIPMENT (WEAPONS) - RITENDER 10/11/2015
500 Supply of equipment to security and riot control KCS institutions 06/11/2015
501 Supplying weapons and other equipment 02/11/2015
502 Supply of ammunition and other equipment to defend itself. 02/11/2015
503 Supply of 9x19 mm caliber ammunition for short gun Glock 19;
Supply furnish protective bulletproof vest;
The supply of cold weapons in hand with the rod type Brake opportunities
02/11/2015
504 Supply of bullet proof vest for the needs of the Police Force 23/10/2015
505 GIS Substations: 110/10(20) kV - Pristina 6 and 110 kV HIS in SS Pristina 4, 110/10(20) kV - Fush Kosov, 110/10(20) kV - Mitrovica 2, 110/10(20) kV - SS Theranda and 220/10(20) kV - Drenasi 2 23/10/2015
506 3. Transmission Lines and Cables: 110 kV Single circuit line Rahoveci - Theranda, 110 kV Double circuit line and cables Fush Kosov, 220 kV Double circuit line Drenasi 2, 110 kV Double circuit cable line Mitrovica and 110 kV Double circuit cable line Pristina 23/10/2015
507 The supply of ammunition and other equipment to defend itself 23/10/2015
508 The Explosive Material Supply For The Needs Of Ksf 22/10/2015
509 Supply Civilian Clothes Women-Ritender The 19/10/2015
510 SOFTWARE MAINTENANCE AND SUPPORT BUDGET OF THE ASSEMBLY OF THE REPUBLIC OF KOSOVO 19/10/2015
511 Supply of uniforms for workers KP -RITENDER 16/10/2015
512 Supply motor boat to the needs of Search and Rescue (RCM) KSF 16/10/2015
513 Supply" HAZMAT equipment "for the needs of the task force that KSF 15/10/2015
514 Supply Shoes And Boots For Workers Kp - Ritender I 14/10/2015
515 The contract concerns the supply of thermal energy meter for termonnstacionet network for the needs of POE "Termokos" JSC. 12/10/2015
516 Ammunition Supply For Kp 09/10/2015
517 Supply scanner and detector DPD 08/10/2015
518 Supply of land-winter shoes 08/10/2015
519 Printing of Pay For Service for post offices to Post of Kosovo JSC 01/10/2015
520 The feasibility study for the establishment of the interbank system for POS and ATM transactions 29/09/2015
521 SUPPLY PARTS FOR MOTOR VEHICLES 2.5 DIESEL Ford Everest XLT Ritender-1
25/09/2015
522 Supply of ammunition for PK 23/09/2015
523 The subject of the contract relates to the supply quantity for Helmets ballistic 28 pieces, special equipment for the carriage of explosives, 3 pieces, costume anti bomb 3 pieces, Robot 2 pieces, Lock Frequency 3 pieces, Detector for explosive 3 pieces, battery weapon 28 pieces, foot glock Folding cases for 39 pieces. 22/09/2015
524 Supply of military blankets, bed covers, cushion covers and pads for the needs of KSF 22/09/2015
525 Supply of spare parts for maintenance of SCADA equipment 22/09/2015
526 Supply Rifles Police And Koosves 21/09/2015
527 Supply And Mask Bulletproof Vest 21/09/2015
528 Supply of radar transmitters and diaphragm 21/09/2015
529 Supply of Weapons. 18/09/2015
530 Supply pressure switch 16/09/2015
531 Prior information notice for Support to the decommissioning process of Kosovo A Thermal Power Plant 15/09/2015
532 Supply with vehicle registration plates 10/09/2015
533 Supply and Installation of Bulk Water Meters and Customer Water Meters for Non-Revenue Water (NRW) Reduction in the Gjakova / akovica Town Water Supply Network. 08/09/2015
534 Feasibility study for environmental and other measures on Kosovo B Thermal Power Plant 01/09/2015
535 Supply of vest and hand Work. 01/09/2015
536 Supply with uniforms for workers KP 31/08/2015
537 Rocket Boomer supply parts for T-1D 31/08/2015
538 Prior Information for Health insurance services 20/08/2015
539 Feasibility study for environmental and other measures on Kosovo B thermal power plant 04/08/2015
540 Supply of patrol car for the needs of the Kosovo Police 30/07/2015
541 Support to the decommissioning process of Kosovo A Thermal Power Plant 23/07/2015
542 Support to the decommissioning process of Kosovo A thermal power plant 23/07/2015
543 Maintenance And Servicing Of Generators, Cars Lajtors And Ashensorve 21/07/2015
544 Rehabilitation Of Transformers 15/07/2015
545 Supply of water meters and seals 14/07/2015
546 Supply and installation of water meters and water meters Customer Area Reduction of Non-Revenue Water (NRW) in the network of the city of Mitrovica 14/07/2015
547 Supply of equipment for radio-system 14/07/2015
548 Supply of water meters and seals 14/07/2015
549 SUPPLY OF TRAFFIC SIGNS AND THEIR ASSEMBLY 25/06/2015
550 Supply and installation of water meters and water meters Customer Area Reduction of Non-Revenue Water (NRW) in the network of the city of Ferizaj " 22/06/2015
551 Motor third party liability insurance for vehicles of KJC and the courts 19/06/2015
552 Supply and installation of transformer at Rilinjde 08/06/2015
553 Supply of ambulances 05/06/2015
554 Health insurance services for employees KEK JSC 04/06/2015
555 Supply of personal protective equipment at work Lot 1 - different work clothes Lot 2 - work clothes and antistatic jersey Lot 3 - Helmet safety work gloves Lot 4 - working sleeved gown, protective caps, jackets, jakne, kombilizona etc 27/05/2015
556 Supply and installation of water meters and water meters Customer Area Reduction of Non-Revenue Water (NRW) in the network of the city of Mitrovica 26/05/2015
557 Replacement of the generator rotor ring A-3 26/05/2015
558 Supply of traffic equipmen 21/05/2015
559 Purchase of two Generator supply for Centre of Competences (CoC) in Prizren and Ferizaj 20/05/2015
560 Supply summer clothes Fire Unit 18/05/2015
561 Supply ambulance with zero km 06/05/2015
562 Workers Health Insurance 05/05/2015
563 Health Insurance in travel for MPs, political staff and administration of the Assembly 05/05/2015
564 Vehicle insurance MAFRD 30/04/2015
565 Supply of personal protective equipment at work 27/04/2015
566 Supply Mobile Devices and Application of Water Meter Reading and Water Fakturim for KURP JSC 17/04/2015
567 Supply of military boots" for the needs of KSF 14/04/2015
568 Official Vehicle insurance Municipal Institutions 10/04/2015
569 Official Vehicle insurance needs MEST 10/04/2015
570 Official Vehicle insurance Municipal Institutions 10/04/2015
571 FERM Bullet Velocity 2015 10/04/2015
572 Supply Mobile Devices and Application of Water Meter Reading and Water Fakturim for KURP JSC 08/04/2015
573 Motor third party liability insurance for motor vehicles 08/04/2015
574 Supply of ambulance needs new QKMF 07/04/2015
575 Supply and installation of digital apparatus for counting and reading electronic voting for the new Assembly Hall 02/04/2015
576 Supply of protective equipment at work 31/03/2015
577 Supply of ID cards and printers Ribbona 31/03/2015
578 Supply of ID cards and printers Ribbona 31/03/2015
579 Supply of ID card, Ribona and accompanying material for the needs of UP Hasan Prishtina 30/03/2015
580 Supply of meters and seals 30/03/2015
581 Clothes supplying workers FRS (fire service workers) 30/03/2015
582 Supply of vehicles (nation) for the transfer of prisoners. 24/03/2015
583 Supply Certificate of Registry 09/03/2015
584 Supply of protective clothing and uniforms 05/03/2015
585 Traveling with aeroplane services to the needs of the MPMS. 27/02/2015
586 Traveling With Aeroplan services to the needs of the MPMS 27/02/2015
587 Plane Ride Service For The Needs Of Med 19/02/2015
 Procurement News 
  •  This provides for control of surface transportation and better utilization of roads and networks. NextTraffic
  •  The statement quoted Mr Robert Dickerman, the Chief Executive Officer of EEDC, as expressing hope that the use of meters would boost revenue collection and reduce lost of energy.
  •  Speed Identity has supplied 35 biometric data capture stations and 200 fingerprint readers to Moldova as a result of an EU-supervised tender aiming to increase security and quality of the countrys passports.

    According to Speed Identity, as part of the EU programme, countries with high volumes of people entering the EU, receive support in project management, know-how and financing by the EU in establishing reliable, high-security ID documents for travel. Moldovas new ePassports now include digital, ICAO-compliant facial photos and fingerprints, as well as a number of other document security features to prevent forgery and the creation of false identities.
    Speed Identity says its Speed Identity SCL1000 (Speed Capture Light station), is a proven all integrated solution for instant live capture of facial photos, fingerprints and digital signatures. It has been in use with national authorities in Luxembourg and Sweden since 2008, in both mobile and fix-mount applications. The Speed Capture API has enabled the systems integrator to easily develop a customized enrolment workflow application controlling all features of the capture system, from data acquisition and photographic illumination, to data quality control and file output.
    This is an important project where Speed Identity, being the expert partner, contributes in upgrading a non-EU country to comply with EU and ICAO regulations for travel document security. Normally such projects require a period of fine-tuning the system after implementation, but we have confirmations from the end user that the deployment phase went very smoothly, says Magnus Lfgren, CEO at Speed Identity.

    Source: http://www.securitydocumentworld.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Regulating body armour wont stick, said retailers.

    Starting June 15, Albertans who own or want body armour need a legitimate reason under the Body Armour Control Act, or a permit from the Solicitor General and Public Security office.

    Officers will soon be able to charge people wearing bullet or stab-resistant vests, along with seizing the armour if they dont have a permit. And those people can expect to pay a fine up to $10,000, along with serving six months in the clink.

    Police now have another resource in their fight against gangs in our communities, said Jonathan Denis, Albertas Solicitor General and Minister of Public Safety.

    This initiative doesnt penalize those with a legitimate reason to wear body armour, such as police or security personnel.

    Albertans with professions in policing, security or safety are exempt from the act, while everyone else needs to explain themselves to the solicitor general and public security office.

    A body armour permit costs $50 per year and takes five days to process. Citizens have to pass a criminal background check in order to get a permit.

    Gordon McGowan, president of rearmament distributor MilArm in downtown Edmonton, thinks the act is a knee-jerk reaction to a nonexistent problem.

    Body armour vests are just an Internet search away from anyone who wishes to hide their purchase from the government, McGowan said.

    If I have a reason to own body armour and I want it, why is it up to the government to determine if my reason is legitimate or not? McGowan asked.

    Milarms carries around a dozen VestFriend stab-resistant vests and McGowan said they sell only a few each month. Their most common body armour buying customers are nightclub owners looking to equip their bouncers and doormen.

    He has a strict store policy not to sell body armour to civilians, which keeps the gang-bangers from inquiring said McGowan.

    Source: BY MATT DYKSTRA, http://www.edmontonsun.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  AMMAN -- An armoured vehicles manufacturing plant was inaugurated at the Zarqa Free Zone on Tuesday. The JD2 million Jordanian and Russian investment will provide regional countries, particularly the Iraqi market, with bullet resistant cars, generating around JD24 million in production annually, according to plant Executive Director Ahmad Suleiman.

    Built on a 3,200 dunums of land, the factory will employ 100 workers from the local community and exploit 80 per cent of the national resources, said Nasser Shreidah, chairman of the Jordanian Free Zones Corporation. He added that the plant, the first of its kind in the region, will provide the regional market with highly developed bulletproof vehicles according to European standards.

    Source: http://www.zawya.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  New legislation to guard against the use of body armour and fortified vehicles by gang members goes into affect this weekend. People who either have or sell the armour must now have proper licenses or permits. However licensed security guards, and corrections officers are exempt. Anyone driving or owning a vehicle that has been adapted to resist bullets or explosives must also have a special permit. All armoured vehicles must also be inspected. Failure to comply results in fines in the thousands of dollars, and possible incarceration.

    Source: http://www.cjob.com,

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Visiongains analysis indicates that the global military body armour and personal protective gear market will be worth $1.07bn in 2012. The Military Body Armour & Personal Protective Gear Market 2012-2022 report finds that spending on military protective gear and body armour, despite pressure in the form of defence cuts from many predominant military nations, will remain central to defence budgets worldwide.

    The visiongain author of The Military Body Armour & Personal Protective Gear Market 2012-2022 report commented that: Spending by militaries worldwide on body armour will remain a fundamental aspect of defence budgets for years to come, as despite budgetary pressures affecting many Western nations at present, an underlying desire and responsibility to provide the best protection to military personnel will spur demand for new and advanced equipment.


    The report contains 100 tables, charts and figures that quantify and forecast the military body armour & personal protective gear market. Visiongain provides forecasts for the period 2012-2022 in terms of value (US$) for the military body armour & personal protective gear market 2012-2022, as well as for 3 submarkets and 12 leading national military body armour & personal protective gear markets. The report provides profiles of 20 leading companies operating within the market, and includes 3 interviews with experts in the field military body armour, providing specialist insight alongside visiongain analysis.

    The Military Body Armour & Personal Protective Gear Market 2012-2022 report will be of value to current and future potential investors in the field of body armour, as well as companies and research centres who wish to broaden their knowledge of the military body armour & personal protective gear market.

    For sample pages and further information concerning the visiongain report The Military Body Armour & Personal Protective Gear Market 2012-2022 please visit: www.visiongain.com/Report/794/The-Military-Body-Armour-Pe...

    For an executive summary of this report or to order it today please email:
    Sara Peerun at sara.peerun@visiongainglobal.com
    Tel: +44 (0) 20 7336 6100


    Source: http://www.openpr.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  OSWEGO Aging police vehicles are slated for discussion during tonights Administrative Services Committee meeting, as Oswegos police chief submitted five requests to bolster the departments fleet, which would include the addition of an armored surplus military vehicle.

    Oswego Police Chief Tory DeCaire is asking councilors to approve the purchase of a 2012 Chevy Tahoe and a 2012 Chevy Impala. The vehicles would be purchased at or below New York state contract pricing and the funds would come from the police departments existing budget allotment for vehicles and equipment.

    Also up for discussion is the additional purchase of a 2012 Chevy Tahoe as part of the Operation Stonegarden grant administered through the U.S. Border Patrol. According to the Department of Homeland Security website, Operation Stonegarden accepted competitive proposals for $46.6 million available in 2012. The purpose of the grant money is to enhance cooperation and coordination among local, tribal, territorial, state and federal law enforcement agencies in a joint mission to secure U.S. borders along routes of ingress from international borders, including Canada and Mexico as well as international water borders.

    Along with the updated traditional fleet vehicles, DeCaire is also seeking to acquire a used up-armored surplus military vehicle. Administrative Services Committee Chairman Ron Kaplewicz, R-7th Ward, said he looked forward to hearing about this unusual vehicle. Im sure the chief will tell us what its all about, the chairman said.

    DeCaire noted in his request that there is no cost for the surplus military vehicle, as it will remain the property of the U.S. Department of Defense. He noted there would, however, be some cost associated with shipping the vehicle. The committee agenda described the up-armored addition to the fleet as useful to the police department in quality-of-life enforcement and outreach programs, as well as being available for use in the event of an armed emergency situation.

    Rounding out the departments vehicle requests, the police chief would also like to accept a used 1998 Ford pickup truck as a result of a civil forfeiture. If the department of public works deems the vehicle safe, police plan to use it during investigative work. If the vehicle is deemed unsafe, it will be turned over to the DPW for disposal at auction or other approved means.

    During last years budget negotiations on Aug. 2, DeCaire informed council members that his request of $84,000 for equipment, which included three new police vehicles, had been reduced to $32,000 in the mayors proposed 2012 budget. That would be enough to buy only one new fully equipped police vehicle. The police chief noted that his department used to have a car replacement policy, with two new vehicles included in the budget each year to replace those in the fleet that had acquired high mileage and other maintenance problems from constant use.

    Then we were told, No cars, and we got behind the eight ball, he told councilors at the time. To maintain our cycle, we need two vehicles.

    Councilors Mike Myers, R-2nd Ward, and Shawn Walker, R-4th Ward, looked for ways the city budget could accommodate the police departments needs. City Chamberlain Deb Coad noted before the finalized budget that there were a few key items that had changed since she and former Mayor Randy Bateman had put the initial proposal together and she re-examined it to see if there was possible funding for an additional vehicle. As a result, additional funds were delegated to the police department, increasing the equipment line to $58,000 in the final adopted budget.

    Even though Crown Victorias would no longer be produced, DeCaire believed at the time that there should be enough of these police vehicles to supply his department through 2012.
    Other committee matters up for discussion will include the request to forward a zone change request at 253 W. Utica St. from an R-2 residential to a B-1 neighborhood business district; a request from the citys purchasing agent to forward to the Common Council a resolution to accept the lowest bid submitted by WD Malone Trucking & Excavating Inc. in the amount of $1,341,736.00, for the Sanitary Sewer Rehabilitation project, Area 1-Turrill Street Basin; a discussion by the citys fire chief regarding special details for the citys ambulance service; and a proposal from the DPW commissioner for a life jacket loaner program.

    Committee meetings are held in the council chambers on the second floor of City Hall and begin at 7 p.m.

    Source: By JANET REBEOR-DEXTER, http://palltimes.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  RR Donnelley isnt a name you see very often in TechCrunch, but companies dont survive for nearly 150 years without having one eye trained on the future. With 2011 revenues at an estimated $10.6 billion, the company is one of the worlds largest commercial printers. The printing giant has been stepping up its digital investments of late, and today announced that it has invested $2.5 million in Real Value Corporation, the makers of iPad shopping app, CoffeeTable.

    The Series A investment is the first tranche of a larger investment by RR Donnelley and includes an exclusive marketing relationship between the two companies. CoffeeTable will be using the infusion of institutional capital to launch new personalization and engagement features and hire developers.

    For those unfamiliar, CoffeeTable is a free shopping app for the iPad that aggregates hundreds of retail catalogs to allow users to browse their products on the go, online or offline. CoffeeTable gives shoppers the ability to make purchases from their iPad through secure in-app checkout, while in turn giving retailers a suite of benchmark data and catalog analytics tools that they can use to boost their multi-channel marketing efforts.

    As RR Donnelley is one of the largest printers of retail catalogs in the world, it can now leverage its existing relationship with retailers to help bring CoffeeTable access to a wide range of content from the companies whose products it aggregates, while, in turn, giving those major retailers an additional point of access into the tablet market.

    CoffeeTables app allows users to browse full-screen images of products, with zoom functionality, adding products to a shopping cart, both online and offline. Users can subscribe to their favorite brands and have the latest catalogs delivered to their iPad from retailers that include Crate & Barrel, Lands End, West Elm, etc. Beyond offering quick checkout across all catalogs through its Express Checkout, CoffeeTable also offers giveaways, seasonal pop-up shops, and flash deals which are applied at check out.

    Catalogs are collectively a $270 billion industry, and while individual retailers may offer their own tablet shopping apps, CoffeeTable brings them all together in one place, presumably offering a better shopping experience for the end user. Together, the two companies seem to be looking to establish an Amazon for retail catalogs, and with further development of analytics tools, retailers will be able to get a better sense of the mobile purchasing behavior of consumers something many of them are lacking.

    Source: http://techcrunch.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  A new blast defence mechanism could double vehicle protection against mine explosions without additional armour, according to its inventor.

    The active belly plate system developed by Advanced Blast & Ballistic Systems (ABBS) exerts a force against the floor of the vehicle to reduce floor deformation and help stop the vehicle from being thrown into the air.

    The technology, which has been taken to proof-of-concept stage, works by exploiting the short delay between a mine going off and the explosion hitting the underside of the vehicle, using this time to counteract the force of the mine.

    Originally I was dealing with the global acceleration, which is the vehicle jumping in the air, and that on its own can kill you, Roger Sloman, managing director of ABBS and inventor of the system, told The Engineer.

    And then I thought that if you put the force down a column in the vehicle onto the belly plate, you can keep the floor down as well, which is even more important. So its a very simple concept of actively opposing the force of the mine.

    Because it deals with global acceleration, the technology should protect lighter cars as well as armoured vehicles. You dont carry around huge amounts of mass to counteract the blast, said Sloman. You can double the mine blast capability of a system, at least.

    The system detects the shockwaves of a blast, which travel at the speed of sound and arrive around 20 milliseconds before the mass of the explosion, providing enough time for the belly plate to react.

    ABBS received 116,000 from the Ministry of Defences Centre for Defence Enterprise to develop the technology and is now seeking funding to build a commercial prototype of the device.

    Sloman said it could be further developed to provide specific forces to match each explosion. Either you can set everything off or you can analyse the strength of the shockwave and get an estimate of the size of the mine and where it is and therefore you can tune the response.

    Source: By Stephen Harris, http://www.theengineer.co.uk

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  A liquid body armour is being developed by BAE Systems (a global defence company) that hardens on impact. The liquid is made up of "freely suspended" particles that "lock" together when disturbed. The benefits include its lightness, flexibility and a reduced injury risk compared to alternatives such as Kevlar.

    Self-sculpting smart sand

    Researchers at the Distributed Robotics Laboratory of MIT are developing robotic cubes that will work like smart self-sculpting sand. In one experiment, one-centimetre-squared cubes contained a microprocessor cabable of storing 32 kilobytes with tiny magnets on the edges that could enable the formation of complex 3D shapes.
    Via BBC.

    Make your own robot

    Another MIT initiative may allow people with no specialised training to become robotics engineers thanks to the ubiquitous technology of 3D printing. If a bespoke robot is required, any individual could download a blueprint, tweak it to suit their need and print a rudimentary robot that will be fully functional within 24 hours.

    Source: http://www.nzherald.co.nz

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  MEPs in Strasbourg have questioned the European Commission (EC) about the security of biometric passports following reports of problems with the documents in a number of countries including France and the Netherlands.
    Back in 2008, the European Parliament (EP) identified weak points in the system including problems with the reliability of fingerprints taken from children and the elderly; error rates; lack of experience of the technologies being used; and the risk of fraud at various stages of document deployment. As a result, the EP asked the EC to commission studies into these areas, which are expected to conclude later this year.
    According to the EP, between 500,000 and 1 million of Frances 6.5 million biometric passports in circulation are estimated to be false, having been obtained using counterfeit documents.
    In the Netherlands, an examination of 448 cases by local the authorities in Roermund found that 21% of the fingerprints were non-verifiable and therefore useless.
    As a result, MEPs invited EC representatives to a plenary session on 19 April 2012 to respond to their questions about the effectiveness of biometric passports. They have also asked if it will now consider re-evaluating the rules governing the issue of ePassports in the EU.

    Source: http://www.securitydocumentworld.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The U.S. Government Printing Office (GPO) has produced 75 million electronic passports at its secure production facilities in Washington, D.C. and Stennis Space Center in Mississippi.

    The electronic, or e-passport program, launched in 2005 and includes an integrated, secure chip and antenna incorporating numerous security features. GPO and the Department of State developed the U.S. e-passport in response to the requirements for Visa Waiver Program countries in the 2002 Enhanced Border Security and Visa Entry Reform Act.

    The Department of State loads personal information, including the travelers photograph, digitally onto the chip in each passport. This is the same data that is visually displayed on the photo page of the e-Passport. No personal data is handled by GPO or its suppliers.

    We appreciate GPOs continued support of the Department and our efforts to modernize the U.S. passport. Passport issuance, a function of the Departments Bureau of Consular Affairs, is our most visible domestic public service program, said Michael D. Kirby, principal deputy assistant Secretary of State for Consular Affairs.

    Source: http://www.contactlessnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Chinas Ministry of Public Security announced that after three years of preparations, the authorities countrywide will start issuing electronic ordinary passports from May 15 onwards.
    Photos

    View photos
    Related Articles

    China to pilot emissions trading system
    China standardises social security cards
    Sri Lanka to launch e-passport services

    Related Categories

    CENTRAL GOVERNMENT
    GOVERNMENT SECURITY

    From this Section

    NEWS

    The e-passport will contain an electronic chip, which stores personal information of the holder, including name, data of birth, photo, fingerprint and signature.

    The Ministry says that the e-passports are compliant with standards released by ICAO (International Civil Aviation Organisation), ensuring security and privacy of the personal information of holders.

    The application process will largely remain the same, with two additional steps to collect the applicants fingerprint information and signature. Citizens who are under 16 years old or whose fingerprints are missing are exempted from the fingerprint collection process, according the Ministry.

    The new e-passports will have a refined design, with images representing the 31 provincial level jurisdictions, Hong Kong & Macau Special Administrative Regions, as well as Tiananmen, the Great Wall and the Temple of Heaven.

    The Ministry says that more than 10 million passports were issued countrywide last year. And this figure is expected to rise by 20 per cent this year.

    Since 2004, more than 90 countries and territories have started issuing e-passports. And China started issuing electronic official & diplomatic passports last year.

    Source: FutureGov- Asia
  •  MONEY printer De La Rue has cashed in on strong demand for banknotes and passports but stayed quiet over talk it was stockpiling new Greek drachmas.
    The group, which produces more than 150 national currencies, stamps, driving licences and cash sorting equipment, printed 6.4 billion banknotes last year, 8 per cent more than the previous year.
    The start of production on a UK Government deal to produce passports also contributed to a 73 per cent rise in annual profits to 57.7million on revenues up 14 per cent to 528million.
    The firm has won contracts from countries such as South Sudan, which introduced a new currency following independence.
    But it stayed tight-lipped on talk that it had drawn up draft plans to print a new Greek currency should Athens quit the euro.
    De La Rue said last year that the eurozones problems could create opportunities.
    Chief executive Tim Cobbold said: Its always our policy not to comment on matters like that.
    The group, the profits of which in 2011 tumbled after paper production issues with major customer the Reserve Bank of India, has begun a shake-up to boost profits to more than 100million next year.
    It said it made good progress, achieving efficiency improvements that contributed about 8million to operating profit.
    A new banknote sorter, which can handle up to 2,000 notes a minute, drove a 14 per cent rise in revenue in the cash processing gear arm.
    But lower customer demand led to falling profits and flat revenues at its security product division, which makes holograms for sports tickets and other valuable printed items.
    De La Rue said orders rose 14 per cent to 248million and it was on track to hit annual hopes. Cobbold said: The face value of cash in circulation is growing, particularly in countries where populations and affluence are rising.
    The shares fell 32p to 976p.

    Source: By Philip Waller, http://www.express.co.uk

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Indias electronic passport project has hit a roadblock as the Amsterdam-based company Gelmalto, selected for supplying chips came under scanner for its alleged role in smart card rollout in Pakistan.

    The Ministry of External Affairs has sought a fresh security clearance from the Ministry of Home Affairs for Gemalto, which was selected to supply chips for the pilot project in 2008. The MNC was reported to be impementing smart card project in Pakistan.

    The Ministry of Home Affairs asked the Department of Economic Affairs under the Ministry of Finance to obtain a self-disclosure report from Gemalto, detailing its businesses in Pakistan. It is also understood to have engaged intelligence agencies to assess if Gemaltos business in Pakistan could pose a security threat to India in case it is allowed to continue supplying chips for the project.

    Gemalto, however, claimed that the company had never participated in any government project in Pakistan. We have never had any government projects with Pakistan, a spokesperson of the company stated in response to queries from Deccan Herald.
    The Gemalto spokesperson said the company did serve governments of over 50 countries with its secure document and e-government solutions.

    Gemalto was known as Axalto before the latter merged with Gemplus on June 2, 2006. Axalto, however, had in August 2005 announced to have supplied high-end EMV (Europay-Mastercard-Visa) chip to Pakistans United Bank Limited.

    As the UBL had pioneered EMV rollout in Pakistan, Axalto had provided the bank with a package that included data preparation, cards supply and personalisation solution.

    Gemalto was in September 2008 selected to supply its Sealys eTravel solution to India Security Press for the e-passport pilot project, aimed at issuing tamper-proof and secure travel documents to diplomats and officials. The Sealys eTravel package included contact-less communications component of the electronic passports made by the India Security Press. It also included advanced secure operating system and microprocessor that stores and protects the holders digital identity as well as the communications antenna.

    The MEA had plans to start issuing e-passports to ordinary citizens in the second phase. But it recently said that the project had to be deferred as it had to seek fresh security clearance from the MHA in respect of a technically qualified bidder (Gemalto).

    Gemalto did not give a specific reply to a query from Deccan Herald on whether the company had submitted the self-disclosure report to the Indian Government. However, in a consolidated response to a set of queries, its spokesperson said the company maintained the policy of customer confidentiality and did not comment on the details of its customers operations and processes.

    Notably, in a recent report, the Parliamentary Standing Committee on External Affairs had expressed concern over the doubtful background of Gemalto.

    Source: http://www.deccanherald.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  With big government contracts up for grabs, we take a look at six of the vehicles vying for military money.
    In service since 1984, the Humvee isnt getting any younger. Right now the United States military is in possession of nearly 18,500 of them, all of which are set to be replaced by an as-of-yet-to-be-determined successor in 2015. Enter the suppliers and contractors who are all vying for a piece of the government pie. And who can blame them? With $5 billion being awarded across three winning companies each liable to receive up to $65 million for preproduction engineering, manufacturing, and development the race to supply the military with its next Joint Light Tactical Vehicle is underway.
    Of course, whenever government contract money is at stake rest assured there are multiple players in line gunning for it. And with the United States government preparing to dish out billions in contract cash in order to replace the iconic military Humvee, competition is fierce.
    Last month, AM General, makers of the original Humvee, unveiled its Blast-Resistant Vehicle-Off Road (BRV-O) in Detroit, but they arent the only ones aiming to win those government greenbacks. Stiff opposition from Oshkosh Defense, Lockheed Martin, and BAE Systems, among others, all of which are vying for one of three contracts on the line.
    Given that these hardcore military machines are truly a sight to behold, here is a quick rundown of the six vehicles battling it out.

    BRV-O:
    Makers of the original Humvee, AM Generals BRV-O is somewhat of a latecomer to the party. Shown for the first time last month in Detroit, the BRV-O features a six-cylinder, 3.2-liter turbocharged engine which is said to churn out 300 horsepower and 500 pound-feet of torque.
    Inside, the BRV-O s crew capsule features energy-absorbing seats, shaped underbody, and modular armor for maximum protection. Of course, added armor can quickly pack on the pounds, reducing overall vehicular mobility. AM General seems to have addressed these issues thanks in large part to an increased payload that provides a margin for added armor, as well as a unique self-leveling suspension aimed at increasing the BRV-Os tactical maneuverability.

    Eagle:
    A joint effort between General Dynamics Land Systems and AM General, The Eagle may not appear as shiny and bleeding edge as some of its counterparts, but that may just provide it with the advantage it needs to allow the Eagle to soar over the competition. In fact, military buffs will no doubt already be familiar with the Eagle, seeing as how its a repurposed version of the Eagle IV, which General Dynamics European Land systems has supplied to the German military since 2008.
    The Eagle isnt as new, but it is tried and tested; and, perhaps more importantly, its relatively cheap at less than $260,000 a pop.

    Lockheed JLTV:
    With utility in mind, the JLVT a collaborative endeavor consisting of multiple companies including Meritor Defense, L-3 Combat Propulsion Systems, Vehma International of America, with Lockheed Martin at the helm has been designed from the ground up to be one of more versatile and cost effective entries into the U.S. Army and Marine Corps JLTV competition.
    Already a winning bidder for the first phase of JLTV development, Lockheed was forced into making several modifications to its design by reducing the amount of exotic (read: expensive) materials such as titanium after the Pentagons requirements changed for the second phase of the competition.

    Saratoga:
    Launched in October of 2011, Navistar Defenses Saratoga is yet another entry into the U.S. militarys Joint Light Tactical Vehicle program. Originally designed to target a gap in the light tactical vehicle market, the Saratoga provides a tactical salvo of components aimed at improved mission effectiveness, including metallic or composite add-on armor, and is capable of withstanding arms fire, mine blasts, and IEDs.
    Under the armored hood the Saratoga features a fire-breathing V8 capable of pumping out 340 horsepower and 660 pound-feet of torque.

    Valanx:
    Aside from sporting the coolest name of the bunch, BAE Systems Valanx also happens to feature a Ford Power Stroke 6.7-liter turbocharged diesel engine, which BAE indicates gives it a leg up against the competition by providing the best fuel economy, horsepower, and torque of any engine in its class.
    Truck enthusiasts out there will immediately be familiar with the Power Stroke. Its the same engine Ford uses in its F-Series Super Duty trucks. Previously, the Valanx utilized a Navistar engine in favor of its current mill, but made the switch to the more powerful Ford engine, which is capable of producing an impressive 400 horsepower and 800 pound-feet of torque.
    Other specifics regarding the powertrain remain undisclosed, so were not entirely sure whether the engine specs in the Valanx will exactly match up with that of a 2012 F-250 Super Duty.

    L-ATV:
    While the Valanx may score points with its tough-as-nails name and rather futuristic mobile-command-on-wheels design, it is the Oshkosh Defenses L-ATV that wins us over with its rugged looks and take-no-prisoners attitude.
    Built independently and from the ground up, the Light Combat Tactical All-Terrain Vehicle will make use of Oshkoshs Tak-4i intelligent suspension system already used in more than 20,000 vehicles. And because fuel economy is a growing concern, Oshkosh offers its ProPulse hybrid diesel-electric drive train.
    According to Oshkosh, the L-ATV features a scalable and advanced crew protection system which can provide dynamic defense capabilities depending on operational and battlefield needs.

    Source: BY AMIR ILIAIFAR, http://www.digitaltrends.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  OGDEN After being questioned about their use of new license plate recognition technology, the Ogden Police Department put the equipment on display.

    The OPD gave a demonstration to local media Wednesday on how and why they use Automated License Plate Recognition, a new technology that provides continuous and high-speed monitoring of traffic areas.

    Ogden has one ALPR-fitted vehicle, which costs about $50,000 and features four cameras mounted on top of the police car, with a special computer inside. The department has had the vehicle for about one year.

    OPD crime analyst Dave Weloth said the technology can be used in data-mining efforts related to crime scene investigation, criminal travel patterns, hot spots and for other intelligence purposes.

    Weloth said that, among other things, the system can immediately alert officers of wanted individuals, assist in stolen vehicle recovery and assist in Amber alerts.

    Master Officer Tim Shelstead said he has found three stolen vehicles in the past year as a result of having the technology.

    My job would be greatly hindered without it, Shelstead said.

    But the Utah Chapter of the American Civil Liberties Union said it is concerned with how information associated with the technology is used, stored and protected.

    In late May, the OPD was one of three Utah law enforcement agencies targeted by the Utah ACLU with records requests seeking information about the technology.

    The ACLU also sent requests to the Utah Highway Patrol and the Iron County Sheriffs Office.

    A copy of the records request to the OPD shows that the ACLU is seeking information on exactly what type of data is obtained with the technology, who within the OPD can access that data, what procedures those outside of the department must go through to obtain the data and how long data is stored.

    Ogden Police Chief Mike Ashment said he understands the ACLUs concern about the possible misuse of citizen information, but proper safeguards are in place to make sure that doesnt happen.

    We implement the same policies we do with everything else, he said. This is no different than any other tool we use that involves information on people or their vehicle.

    Ashment said the technology fits in with the departments overall approach of using technology to be more effective and efficient in solving crimes.

    We are tasked with ensuring the safety of the community, he said. This is another tool to help us do our jobs better and more efficiently.

    Source: By Mitch Shaw, http://www.standard.net

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Iowa City parking officers may soon hear an alarm if they pass vehicles parked illegally or harboring unpaid tickets using an expensive technology thats the envy of many law enforcement officials.

    The citys Transportation Services Department is looking for vendors and has set aside $154,000 in its budget for a License Plate Recognition system, which works by mounting a high-definition camera on top of a vehicle that takes photos of license plates and runs them through a scofflaw database. Such software still is rare in Iowa but is picking up steam as it becomes more affordable and accessible.

    The idea is to make parking enforcement more efficient, said Mark Rummel, associate director of Transportation Services. Rather than checking each vehicle in a parking lot or row of meters individually, the software would automatically scan nearby vehicles and sound an alarm if it detects a violation.

    I think just the time its going to save us is going to be huge, he said. Its a pretty vast area that we try and cover.

    Police departments in Iowa, including Des Moines and Cedar Rapids, have looked into such software, but most say its too expensive.

    We couldnt afford it right now, said Sgt. Cristy Hamblin, spokeswoman for the Cedar Rapids Police Department.

    Officials with the Iowa City Police Department didnt return calls for comment, but Assistant to the City Manager Geoff Fruin said LPR technology hasnt been discussed for the ICPD.

    Johnson County Sheriff Lonny Pulkrabek said LPR would be ideal for recovering stolen vehicles or catching barred drivers, but it ultimately is too expensive to be worth it.

    As youre going through downtown Lone Tree, to be running every license plate you go by, I could see where that could be useful, he said.

    Private vendors must submit their proposals to the city by July 12, and the City Council will need to approve the contract. Rummel said he hopes to have the software up and running by late fall at the earliest. It would be installed in one of the departments Ford Connects but could be put in more in the future, he said.

    The Transportation Services Department only has access to parking violations, permits and meter records, Rummel said, so the software wouldnt be able to tell whether a vehicle is stolen or whether theres a warrant for the owners arrest, at least not without access to those databases. It would detect whether vehicles have more than $50 in citations that are more than 10 days old, he said.

    University of Iowa Parking and Transportation Director Dave Ricketts said that depending on the cost, his department would be interested in using the software as well.

    Weve got 16,000 parking spaces, he said. Yes, it would help.

    LPR technology has become much more reliable and less expensive over the past 10 years, Ricketts said.

    LPR is definitely going to be in our future, he said. How we use it is unclear yet, whether its enforcement, cashiering or security, but were headed that way.

    The Polk County Sheriffs Department installed an LPR system in one of its patrol cars last summer that can check for things such as arrest warrants, stolen vehicles and missing persons, Sgt. Jana Rooker said. The department received a nearly $26,000 Department of Justice grant to pay for the software.

    Rather than having the officer type license plate numbers into their computers while driving, the software automatically scans plates and sounds an alarm if it detects a warrant or violation, she said.

    So as the officer is driving down the road, almost every vehicle it encounters on the road, that license plate can be checked within a matter of seconds with this software, Rooker said.

    But not everyone is excited at the sound of that.

    Ben Stone, executive director of the American Civil Liberties Union of Iowa, said hes concerned about the governments ability to store the data it collects through LPR software. Steps must be taken now while LPR use is in its early stages to ensure data thats collected is destroyed, Stone said.

    As databases become interconnected and synced, more and more and more of this kind of surveillance technology can create the ability of the government to instantly create a dossier, a profile of what people are doing, he said.

    Source: By Tara Bannow, http://www.press-citizen.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Infineon Technologies announced it is supplying the security chips for Malaysias new national electronic identity cards. Known as MyKad, the smart card features Infineons SLE 78 security controller with Integrity Guard security technology, combined with SOLID FLASH for fast deployment capability. ??

    MyKad is a multi-application national electronic identity card, including biometric identification, which will enable the implementation of additional functions such as driver license, health, ATM, e-signature and eGovernment services. In the past years, Malaysia issued approximately 2 million new identity cards each year.

    Identity cards are used for many years and are subject to intense wear. This is why they must meet specific high requirements. In particular, the bearers personal data should be secured during the entire life of the card. ??

    ?The Infineon SOLID FLASH product provides flexibility by using non-volatile memory technologies. The security certified flash product enables a faster reaction to market changes through short lead times and flexible product usage and offers advantages in logistics, development and throughout the certification process.

    A full range of SOLID FLASH products are Common Criteria certified by the Federal Office for Security in Information Technology in Germany as well as type approved by EMVCo making it the choice for many applications while keeping flexibility for upcoming changes. ??

    MyKad also uses Infineons Integrity Guard security technology. For identification documents with high demands on security, it offers long lasting security with encrypted Dual CPU-core. With this technology, data is encrypted along the entire data path during processing. The security controller core has two processing units, constantly checking each others correct function by utilizing error detection.

    Infineons SLE 78 product family with Integrity Guard is used in eGovernment applications, such as the electronic health card, the electronic identification card and in residence permits with biometric data

    Source: http://www.secureidnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  May sound strange nevertheless true. The armoured car business is booming in the drug-hit Mexico, which, after Sunday election, voted back to power the Institutional Revolutionary Party after 12 years. This party had the unique history of ruling Mexico for over 70 long years between 1929 and 2000.

    The purchase of armoured car has been necessitated by the fact that the country has lost 55,000 people in the last six years in drug-related violence.

    To keep themselves safe (from various drug cartels) while travelling many people are opting to buy armoured cars. They consider their vehicles as safe havens.

    Media reports from Mexico suggests that the sale of armoured cars in the last four years have increased by 1000 per cent.

    A middle-size SUV outfitted with armour is bullet-resistant and can withstand 15 to 20 rounds of bullets fired from a handgun. They are also called family tanks and became a top issue in the recently held election.

    Enrique Pena Nieto, who finally won the presidential election, had said during the campaign that he wants to focus on curbing violence in the streets and less on catching drug cartel leaders and blocking the flow of drugs into the United States. The US wants most of the Latin American countries, where the drug mafia rules the roost, to intensify their battle against the drug mafia.

    Countries like Peru in South America, which saw decline in the drug cartel, has witnessed their re-emergence recently.

    President-elect 45-year old Enrique Pena Nieto had promised to reinvigorate the economy and reduce rampant drug violence. He will take office in December for a six-year term and thus will restore the party that dominated Mexican politics for most of the past century, at times ruthlessly.

    But against he general prediction of a big victory he ended up only 5.4 percentage points ahead of his leftist rival, Andres Manuel Lopez Obrador.

    Pena Nieto got 37.6 percent support compared to 32.2 percent for Lopez Obrador and 25.4 percent for ruling party candidate Josefina Vazquez Mota.

    The ruling National Action Party (PAN) suffered a crushing defeat as it failed to curb the fierce violence of a drug war that has killed 55,000 people and battered Mexicos image.

    Having run Mexico as a virtual one-party state for most of the 20th century, the PRI was ousted in an election 12 years ago. It finished third place in the 2006 presidential election.

    But Pena Nieto, a former governor of the state of Mexico (2005-11), restored the partys pride.

    Not only has he promised to lift economic growth to about six percent a year and create jobs but also draw the heat out of a drug war that has killed more than 55,000 people since late 2006. His main reform proposals include allowing more private investment in Mexicos state-run oil industry.

    Source: http://nvonews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Xtek has announced that it has completed construction of its first large scale XTclave body armour production plant.

    According to the company the new plant is capable of manufacturing more than 1000 high tech body armour plates per day, and will enable the Australian company to supply defence and law enforcement agencies around the world.

    The company has spent the last five years working towards construction of its commercial scale manufacturing plant, after building its initial small prototype plant in 2008.

    XTek says "the ability of this technology to consistently produce advanced technical composites, such as precision, void free, structural carbon fibre reinforced laminates, capable of withstanding extreme thermal loading is significant.

    "It is believed that this could have considerable utility in areas such as aerospace and aviation industries, in which small numbers of high value products are routinely manufactured according to exacting standards."

    Source: http://www.myfen.com.au

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  BANGALORE: From July, including the first Sunday, the regional passport office (RPO), in Bangalore will accept passport application manually at its office in Koramangala.

    "Beginning with the Passport Mela scheduled on June 30 and July 1, the applicants for passport can directly approach the counters at RPO and the passports issued at RPO will have all security precautions, though the applications are accepted manually," said a spokesperson of Ministry of External Affairs ( MEA).

    Biometrics: The ministry will commence incorporating the biometrics as required in countries abroad from 2013. "The passports with biometrics will be introduced from next year and the ministry is trying to install required technical back up by then. For the present the passports will not have bio-metrics as per international standards," the spokesperson said.

    The ministry also held discussions with the employees representatives of RPOs across the country and has reached for an understanding to re-schedule of working hours in view of seven day working day for RPOs to overcome the large quantity of pending applications before the various RPOs.

    "We have convinced the employees of RPOs about the fatigue factor they had to face because of the long working hours, that include the week-end holidays. Once we stabilize the pending numbers of passport applications through the exercise we will revert back to five-days a week schedule. We hope that the pending applications can be cleared by July 7 and July 8, the last two days for Passport Mela," the he said.

    Source: http://articles.timesofindia.indiatimes.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  HID Global says it has shipped more than 150 million high-technology eID solutions to governments for citizen IDs around the world.
    The firm has marked this milestone at a ceremony in Ireland, where it has a high-security eID credential facility producing products for access and identification-related applications such as ePassports and contactless swipe ID/access cards.
    We are proud to be a key provider of secure contactless technology to governments for eIDs worldwide, says Anthony Ball, senior vice president, Identity and Access Management (IAM), HID Global. More than 150 million people worldwide, almost a third of all citizens using high-security ePassports and identity credentials, carry our technology with them. We are exporting technology and know-how to every continent, and our local workforce and the entire community can be very proud of this milestone, as well as our contribution to a critical aspect of the worlds security.
    HID Global says it has shipped more than 100 million components used in ePassports in 30 countries, which comprises approximately 28% of the worlds market. According to the International Civil Aviation Organization (ICAO), as of December 2011, a total of 355 million ePassports had been issued globally. The vast majority of EU countries, as well as numerous states outside of Europe, are now issuing machine-readable ePassports. The company has also shipped more than 50 million microchip-based inlays used in eIDs in 22 countries. Other notable achievements include providing tens of millions of units for a variety of European ePassports.
    Set up 15 years ago, the Ireland facility was acquired in 2007 by HID Global. According to the company, it has expanded the operation and made it into one of the countrys most advanced secure technology facilities to accommodate the growing global trend toward eIDs and ePassports. Now one of Connemara Gaeltachts largest employers, the operation is dedicated to eGovernment product research, development and manufacturing, and includes a world competence centre for HID Globals high technology RFID-enabled components.
    HID Global is at the centre of an important global trend, says Craig Sandness, vice president of sales at the firms Government ID Solutions division. Governments worldwide are shifting to eIDs to dramatically improve the security, privacy, convenience and confident authentication needed in border and access control, and other important identification-related applications such as national IDs, driving licences, electronic voting and health care. As a leading high-security ePassport and eID component producer, we are able to provide the complete assembly of these critical components from one source.

    Source: http://www.securitydocumentworld.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The International Armoring Corporation (IAC) was founded by Mark Burton in Ogden, Utah, in 1993. He initially planned to manufacture 24 vehicles, but ended up with more than 225 in the first year in business. Since then more than 8,000 vehicles have rolled out of the IAC facilities. Although at the beginning the company provided heavy-duty armored vehicles only for security companies and military contractors, the emergence of the civilian armored-vehicle market made IAC focus on conventional vehicles too.
    IAC offers a lightweight, flexible, bullet-resistant material, which is a blend of synthetic fiber laminates called Armormax, which weighs only 3.9 pounds per square foot. For $65,000 to $85,000 IAC can transform any car into an armor-plated automotive fantasy. The most popular choices are large luxury sedans and suburban-type SUVs, but IAC has also transformed smaller cars such as Toyota Camrys, Maybachs and Aston Martins.
    Burton estimates that around 20% of his customers seek protected transportation to mitigate a known threat or have been targeted for attack in the past, and around 50% just seek an insurance against random acts of violence, such as carjackings.

    Source: http://www.inautonews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  William Whyte once boasted in an interview with a Toronto newspaper that his armour-plated vehicles were pretty awesome machines and that his customers included a good friend of Arnold Schwarzenegger.

    But when the Canadian man entered into a multi-million-dollar contract to supply the U.S. Defense Department with 32 armoured gun trucks to protect VIPs in Iraq, he only delivered seven and none of them met the bullet- and blast-protecting requirements, according to a federal grand jury indictment handed down this week in Virginia.

    Federal prosecutors announced late Thursday that Whyte, 67, president of Ontario-based Armet Armored Vehicles, and his company have been charged with three counts of major fraud against the United States, seven counts of wire fraud and three counts of false, fictitious and fraudulent claims.

    The charges have not been proven in court and in a statement emailed to Postmedia News, Whyte, who is not in custody, said he was shocked at the allegations against me, which I totally deny. He also said he was prepared to meet with U.S. prosecutors.

    John Lichtenstein, Whytes lawyer in Roanoke, Va., said Friday there was nothing he could say about the case.

    Armet, based in King City, Ont., has been armouring vehicles for more than 30 years and has manufacturing sites in Bradford, Ont., Danville, Va., and Tangiers, Morocco, according to a detailed company profile on Industry Canadas website, which was updated in late 2011.

    The company has an impeccable worldwide standing and counts as its clients heads of state, diplomats, government agencies, multinational corporations, police forces and discriminating individuals worldwide, the profile states. Its government clients include departments in Canada, the U.S., United Arab Emirates, Europe and Russia.

    Officials with Public Works and Government Services Canada said Friday they were searching to see what, if any, contracts the government may have had with Armet.

    According to the indictment, the U.S. Joint Contracting Command in Baghdad awarded Armet a $4.7 million contract in April 2006 for 24 armoured gun trucks.

    A few months later, a $1.5 million contract was awarded to Armet to build eight more trucks.

    The vehicles were to be used to transport Iraqi VIPs through hostile and dangerous environments.

    According to the indictment, the first 24 vehicles were to be delivered by July 31, 2006, but Armet failed to meet the deadline.

    By October 2006, only four trucks had been delivered.

    The following month, Armet, citing cash-flow problems, sought an advance payment of $1 million, the indictment says. The U.S. military agreed to pay the company $824,531.

    But instead of using that money to build more trucks, the money was diverted for other business and personal expenditures, the indictment alleges.

    By early 2008, the company had delivered a total of seven vehicles, six of which were accepted by the U.S. military.

    There were other problems.

    The contracts required that the vehicles be bulletproof and that their undercarriages be able to withstand explosions. Armet had promised that the floors of the vehicles could withstand various assaults, including blasts from two U.S. M67 anti-personnel grenades.

    But none of the trucks delivered met the required specifications, according to the indictment.

    The vehicles were also supposed to be equipped with special tires that could withstand punctures. The first five vehicles did not have such tires.

    (The defendants) knew that all of the armoured gun trucks they had provided were defective and would not protect the officials that they were intended to protect, the indictment states.

    The U.S. military ended its contracts with Armet in March 2008.

    On Friday, Armets website, www.aavi.com, redirected visitors to the website of another company, Terradyne Armored Vehicles, based in Newmarket, Ont.

    In an emailed statement, Terradyne president Durward Smith said: I can tell you that we have no affiliation with Armet nor its owner. A vehicle design was purchased from them with a temporary redirect of the website to capture any potential business as our understanding is that Armet is no longer making armoured vehicles.

    Whyte, an ex-York Regional Police officer, has a connection to an infamous heist at an armoured car company 20 years ago.

    In November 1992, armed and masked robbers targeted National Armored Ltd. in Concord, Ont., and made off with more than $8 million in cash and cheques from a vault.

    Whyte managed the armoured carrier company at the time.

    Source: By Douglas Quan, http://o.canada.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  JD Leipold of U.S. Army public affairs has this article on female body armour:

    Today, both male and female Soldiers wear body armor that has been designed for men. But the Army plans to field to women next summer a new type of body armor, designed for them, that will be shorter in the torso with more customized adjustments specific to the female form.

    Until that happens, the 14 percent of the Army who are women will continue to wear one of the 11 sizes of the Improved Outer Tactical Vest, or IOTV, that are worn by their male counterparts.

    Following anthropomorphic sizing and fitting studies overseas, and also at Fort Bragg, N.C., West Point, N.Y., and Fort Campbell, Ky., between 2009 and 2011, Program Executive Office, or PEO, Soldier started developing female body armor prototypes that addressed the physical differences between the sexes.

    Lt. Col. Frank J. Lozano, the product manager for Soldier Protective Equipment, said one thing his shop realized quickly from the studies was that women generally have narrower shoulders than males. The shoulder area on the new IOTV design was brought in closer to the neck by adding more fabric and opening the area around the armpits.

    The change translates to increased range of motion in the shoulders and upper arms and also allows weapons to be seated in the shoulder weld. The extra material and adjustment straps also allows darting to be incorporated much as it is on a womans blouse which will give a more secure and customized fit.

    Most females tend to have a narrow or thinner waist as it relates to the chest area, so we pulled the waist area in, Lozano said, adding that its not always a one-to-one relationship. Some women will want more room in the waist area so we allowed for adjustability in the cummerbund in the back which can be pulled in tighter or let out more than on the standard IOTV.

    PEO Soldier also realized through its multiple studies that the typical torso length for women was for the most part shorter than that of men. The female IOTV will be shorter at the bottom. Lozano said the new design will keep the IOTV from rubbing on the hips, which can cause chafing while walking.

    Female Soldiers had also advised PEO Soldier that the standard IOTV, with its longer torso, causes the front armor plate to press into their thighs when they are seated. This cuts off blood flow to their legs. The female version of the IOTV, with its shortened torso, will address this issue. Additionally, a new exterior plate pocket will allow the armor plate to be inserted from the side in a more diagonal fashion.

    Though not part of the female version of the IOTV design, the Army is also looking for ways to develop armor plating that better conforms to the human body.

    The challenge right now is that when you bring in those complex curvatures, the plate loses some of its strength, Lozano said. Were working with some armor manufacturers to invest in a manufacturing capability that finds the right chemistry to develop the soft and hard armor necessary to have a complex curved plate at a light weight that still defeats the threats.

    Developments in protective plate design will make ballistic protection more comfortable and form-fitting for both female and male Soldiers, but thats a way off.

    Lozano said in the September-October timeframe PEO Soldier will begin fielding 100 prototypes to female engagement teams from the 101st Airborne Division to evaluate.

    There are 30 females who well provide with spares and repair parts, he said. Well hold some in reserve in case other females get added to the teams. Theyll do user evaluations, then provide feedback to us that well wrap into the final iteration of the design and look to field to a brigade combat team by next summer.

    Source: http://blogs.ottawacitizen.com
  •  KATHMANDU: The government is planning to introduce the smart card concept in the transport sector after a gap of two years. The Department of Transport Management has decided to introduce smart cards for driving licences and bill books from the current fiscal year.

    The department will call a global tender for the smart card soon, said director general of the department Chandraman Shrestha. We have regenerated the concept following a directive from the Ministry of Physical Planning, Works and Transport Management, he said. The ministry has decided to introduce smart cards in mid-July to reform the transport sector.

    Earlier, in 2010, minister for labour and transport management Mohamed Aftab Alam had tried to introduce smart cards for licences and bill books. However, the process was halted after the Commission for the Investigation of Abuse of Authority suspected irregularities in the process.

    Minister Aftab had formed a committee in the ministry to carry out the bidding process breaching the area of the department. According to law, the department should have started the bidding process. The commission found discrepancies in the process.

    According to Shrestha, the tender process will start in three months and implementation of the smart cards will begin at the end of the current fiscal year. We are serious about implementing it, he said, adding that smart cards can be effective in controlling the use of fake driving licences and bill books.

    The Asian Development Bank is providing financial support for the initiative.

    Similarly, the department is also planning to introduce embossed number plates for vehicles. The introduction of embossed number plates will help control criminal activities. Embossed number plates cant be changed easily, so it will reduce the use of vehicles in crimes, he said.

    Former director general of the department Saradchandra Paudel had envisioned the concept three years back. We have been conducting a feasibility study, he said, adding it will be implemented this year once the study shows a positive result. Tender will be called soon, he added.

    Nearly 1.4 million vehicles are registered in the country including more than 850,000 motorcycles. The policy will affect vehicles plying across the country. The department is planning to implement the smart card from Bagmati zone where about 50 per cent vehicles are registered.

    Meanwhile, the department has completed building digital record of driving licences and bill books in all its 14 zonal offices. The process was started about a decade back. Similarly, the department has introduced e-billing system for collecting transport revenue licence or vehicle registration and for renewing them.

    Source: http://www.thehimalayantimes.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  ALEXANDRIA, VA.Prosecutors indicted a South Korean company and five of its employees on Thursday for stealing the recipe for making Kevlar body armour from the DuPont Co.

    The indictment in U.S. District Court in Alexandria alleges that Kolon Industries engaged in a seven-year conspiracy to steal secrets on the manufacturing process for Kevlar and a similar product called Twaron produced by a large Japanese chemical company, Teijin Limited.

    Kolon would hire current and former DuPont employees as consultants who would provide confidential information about Kevlar, including its polymerization process and details of the manufacturing process, according to the indictment. Kevlar is made at a factory in Richmond.

    Kolon used those secrets to improve its process for making Heracron, a product that competes with Kevlar, according to the indictment.

    Several longtime DuPont employees are identified as unindicted co-conspirators in the indictment who received payments of up to $143,000 (U.S.) to engage in the scheme, according to court records. One of the former employees, Michael Mitchell, has already been sentenced to 18 months in prison for his role in the scheme.

    Last year in Richmond, a civil jury awarded DuPont a $920 million (U.S.) judgment against Kolon, which is appealing the verdict and also fighting an injunction that would bar it from selling Heracron in the U.S. for 20 years.

    Source: http://www.thestar.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The Imprimerie Nationale, the official supplier and printer to the French government, has chosen Datacard Group to provide systems for Frances e-passport program.

    Datacard will install Datacard PB6500 passport issuance systems. These automated, inline high-volume passport production systems will be able to issue up to 25,000 passports a day.

    The systems configuration includes automated leafing, inline inkjet printing, smart card encoding, laser perforation and enhanced lamination of secure thin-film overlays. The systems universal interface comes through Datacards Syntera customization suite software to act as a bridge to link the PB6500 passport systems.

    With the system Imprimerie Nationale has been able to cut passport delivery time from six days to two.

    Source: http://www.contactlessnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The ePassport is the culmination of a sustained process of development of technical specifications for machine readable travel documents (MRTD). It introduces a new dimension to aviation security in that, within the conventional machine readable passport with its machine readable zone, an additional layer of verification of information contained in an electronic chip is placed, which verifies the information in the passports machine readable zone by the use of a special reader. Much research has gone into the areas of the technology and verification in the development of the ePassport.

    ver 104 States are currently producing and using ePassports and there are approximately 400 million in circulation. This accounts for 33per cent of all passports used globally. The additional feature that the ePassport carries in the conventional machine readable passport is a chip containing biometric and biographic information which have to be validated accurately, efficiently and quickly while retaining the security and integrity of the information. Ideally, an ePassport should be issued in accordance with the technical specifications approved by the International Civil Aviation Organization (ICAO) . However, this does not happen in all cases of issuance of ePassports. This lapse could seriously compromise global security. The nuances of this threat are described and discussed in this article against their legal background.

    At a recent Symposium on machine readable travel documents, biometrics and security standards.held at ICAO on 10 to 12 October 2012, experts addressed ICAO machine readable travel documents (MRTD) standards and specifications, identity management best practices and related border security issues. Sri Lanka, an issuer of machine readable passports, was represented at this Symposium. Foremost among these discussions was the ePassport, which is defined by ICAO as a passport which has a contactless integrated circuit (IC) chip within which is stored data from the machine readable passport page, a biometric measure of the passport and a security object to protect the public key infrastructure (PKI) cryptographic technology, and which conforms to the specifications of Doc 9303 part 1 . The ICAO Facilitation Manual defines the ePassport as a machine readable passport that has a contactless integrated circuit embedded in it and the capability of being used for biometric identification of the machine readable passport holder in accordance with the Standards specified in the relevant part of ICAO document 9303 (Machine Readable Travel Documents) . ePassports are easily recognised by the international ePassport symbol on the front cover .

    Biometric Identification

    It is important to note that the operative terms in the definition of the ePassport are biometric identification and public key infrastructure (PKI) cryptographic technology. Biometric technology involves a measurable, physical characteristic or personal behavioral trait used to recognize the identity, or verify the claimed identity of a person. Biometric identification has been defined as a generic term used to describe automated means of recognizing a living person through the measurement of distinguishing physiological or behavioural traits .

    Biometrics target the distinguishing physiological or behavioral traits of the individual by measuring them and placing them in an automated repository such as machine encoded representations created by computer software algorithms that could make comparisons with the actual features. Physiological biometrics that have been found to successfully accommodate this scientific process are facial recognition, fingerprinting and iris-recognition which have been selected by ICAO as being the most appropriate. The biometric identification process is fourfold: firstly involving the capture or acquisition of the biometric sample; secondly extracting or converting the raw biometric sample obtained into an intermediate form; and thirdly creating templates of the intermediate data is converted into a template for storage; and finally the comparison stage where the information offered by the travel document with that which is stored in the reference template.

    Biometric identification gets into gear each time an MRTD holder (traveler) enters or exists the territory of a State and when the State verifies his identity against the images or templates created at the time his travel document was issued. This measure not only ensures that the holder of the document is the legitimate claimant to that document and to whom it was issued, but also enhances the efficacy of any advance passenger information (API) system used by the State to pre-determine the arrivals to its territory. Furthermore, matching biometric data presented in the form of the traveler with the data contained in the template accurately ascertains as to whether the travel document has been tampered with or not. A three way check, which matches the travelers biometrics with those stored in the template carried in the document and a central database, is an even more efficacious way of determining the genuineness of a travel document. The final and most efficient biometric check is when a four way determine is effected, were the digitized photograph is visually matched (non electronically) with the three way check described above . In this context, it is always recommended that the travelers facial image (conventional photograph) should be incorporated in the travel document along with the biometric templates in order to ensure that his identity could be verified at locations where there is no direct access to a central database or where the biometric identification process has not entered into the legal process of that location.

    Public Key Infrastructure (PKI) Cryptographic Technology

    PKI Cryptographic technology uses a brand new technique known as quantum cryptography, designed to eliminate the terrifying vulnerabilities that arise in the way digitally stored data are exposed to fraudulent use. This new technique uses polarized photons instead of electronic signals to transmit information along cables. Photons are tiny particles of light that are so sensitive that when intercepted, they immediately become corrupted. This renders the message unintelligible and alerts both the sender and recipient to the fraudulent or spying attempt. The public key directory - designed and proposed to be used by customs and immigration authorities who check biometric details in an electronic passport, is based on cryptography - and is already a viable tool being actively considered by the aviation community as a fail-safe method for ensuring the accuracy and integrity of passport information.

    In order to assure inspecting authorities (receiving States) that they would know when the authenticity and integrity of the biometric data stored in the MRTD, which they inspect, are compromised and tampered with, the Public Key Infrastructure (PKI) scheme was developed by the TAG/MRTD, which has been pioneering work on the MRTD for over a decade . The scheme is not calculated to prescribe global implementation of public key encryption, but rather acts as a facilitator enabling States to make choices in areas such as active or passive authentication, anti-skimming and access control and automated border crossing, among other facilitative methods. The establishment of a public key directory, through means of public key cryptology and in a PKI environment, is consistent with ICAOs ultimate aim and vision for the application of biometric technology on the fundamental postulate that there must be a primary interoperable form of biometric technology for use at border control with facilities for verification, as well as by carriers and the issuers of documents. This initial premise is inevitably followed by the assumption that biometric technologies used by document issuers must have certain specifications, particularly for purposes of identification, verification and the creation of watch lists. It is also ICAOs vision that States, to the extent possible, are protected against changing infrastructure and changing suppliers, and that a technology, once put in place, must be operable or at least retrievable for a period of ten years.

    The ePassport

    The story of the passport- the precursor of the ePassport starts with the birth of an individual and his birth certificate, which records the event of birth and time and place thereof. The Civil Registry is able, with this document to primarily establish the identity of the person at birth and inform his country of his details for purposes of maintaining census and vital statistics. The passport, which uses this information, gives a person a name and natonality that is required for him to travel internationally. The passport is a basic document in the transport by air of persons. Its use therefore is of fundamental importance as a travel document, not only because it reflects the importance of the sovereignty of a State and the nationality of its citizens but also because it stands for the inviolability of relations between States that are linked through air transport.

    The key consideration of an ePassport is Global Interoperability the crucial need to specify a system for biometrics deployment that is universally interoperable. a Logical Data Structure (LDS) for ePassports required for global interoperability. It defines the specifications for the standardized organization of data recorded to a contactless integrated circuit capacity expansion technology of an MRP when selected by an issuing State or organization so that the data is accessible by receiving States. This requires the identification of all mandatory and optional Data Elements and a prescriptive ordering and/or grouping of Data Elements that must be followed to achieve global interoperability for reading of details (Data Elements) recorded in the capacity expansion technology optionally included on an MRP (ePassport). The other considerations are Uniformity the need to minimize via specific standard setting, to the extent practical, the different solution variations that may potentially be deployed by member States; Technical reliability the need to provide guidelines and parameters to ensure member States deploy technologies that have been proven to provide a high level of confidence from an identity confirmation viewpoint; and that States reading data encoded by other States can be sure that the data supplied to them is of sufficient quality and integrity to enable accurate verification in their own systems; Practicality the need to ensure that specifications can be operationalized and implemented by States without their having to introduce a plethora of disparate systems and equipment to ensure they meet all possible variations and interpretations of the standards; and Durability the requirement that the systems introduced will last the maximum 10-year life of a travel document, and that future updates will be backward compatible.

    The major components of a biometric system are: Capture acquisition of a raw biometric sample; Extract conversion of the raw biometric sample data to an intermediate form; Create template conversion of the intermediate data into a template for storage; and Compare comparison with the information in a stored reference template.

    In terms of security and privacy of the stored data, both the issuing and any receiving States need to be satisfied that the data stored on the IC has not been altered since it was recorded at the time of issue of the document. In addition, the privacy laws or practice of the issuing State may require that the data cannot be accessed except by an authorized person or organization. Accordingly ICAO has developed specifications in Section IV regarding the application and usage of modern encryption techniques, particularly interoperable public key infrastructure (PKI) schemes, to be used by States with their machine readable travel documents as made in accordance with the specifications set out in Doc 9303. The intent is primarily to augment security through automated means of authentication of MRPs and their legitimate holders internationally. In addition, ways and means are recommended to implement international ePassport authentication and to provide a path to the use of ePassports to facilitate biometric or e-commerce applications.

    Conclusion

    The foremost necessity is to establish a strong security culture in every State. For this, there must be a clear definition of State responsibility and accountability brought to bear by a close and unbreakable link between government and industry stakeholders. A security culture would make States aware of their rights and duties, and, more importantly, enable States to assert them. Those who belong to a security culture also know which conduct would compromise security and they are quick to educate and caution those who, out of ignorance, forgetfulness, or personal weakness, partake in insecure conduct. An ePassport must necessarily be the result of efficient and fail-safe organizational arrangements. It should be tested at border control by trained professionals.

    eGovernment and eID are the bare essentials for State security. The digital economy has also brought much facilitation that helps the world move to paperless processes which result in greater economy and streamlined processes. However, there must essentially be global harmonization in this process. In this regard ICAO has made remarkable progress in advancing its MRTD programme to the level it is at now. If harmonization means ensuring consistency between global practices, standardization means compliance with international Standards. There is no room for doubt that both harmonization and globalization are needed in this context.

    Source: by Dr. Ruwantissa Abeyratne, http://www.srilankaguardian.org

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The Conservative governments fervour for Canadian history will play out on the pages of your new passport, soon to be unveiled after nine years of delays and cost overruns.

    After a multimillion-dollar advertising campaign for the War of 1812 and the announcement that they plan to rename the Canadian Museum of Civilization in Ottawa as the Canadian Museum of History, the Tories are set to unveil new designs for Canadas electronic passport that focus on key historical moments, HuffPost has learned.

    Bureaucrats at first recommended the government adopt images of fauna and flora to grace the inside pages of the new travel document, similar to the United Kingdoms passport. The Conservatives chose instead to follow the example of the U.S. passport, which features images of the Declaration of Independence and Mount Rushmore, and focus on history.

    It will be something that Canadians can be proud to carry, said Rick Roth, a spokesman for Foreign Affairs Minister John Baird. Roth refused to elaborate on the design sketches that will be part of the new electronic passport, which will be issued for five- and 10-year time periods.


    What would you like to see in the passport design? Share your comments
    The implementation of Canadas ePassport, which includes an electronic chip with facial recognition information, has been delayed for nine years. A pilot program for diplomats and public office holders was planned for 2005 but did not get under way until 2009. The national roll-out was put on the back burner until the 2008 budget announced ePassports would be ready in 2011. Then it was 2012. Now, they should be ready in 2013.
    Canada is the last G7 country to implement the international standards established by the International Civil Aviation Organization (ICAO) in 2003. All of Canadas key allies and more than 95 countries, including Pakistan, Sudan and Tajikistan, have pushed ahead with the technology.

    Source: By Althia.Raj, http://www.huffingtonpost.ca

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Zimbabwe is exploring the implementation of ePassports before the end of the year, according to the countrys Home Affairs co-minister Theresa Makone.
    ePassports, also known as biometric passports contain an electronic chip that is encoded with surname, given name, date of birth, place of birth and gender information. It also includes a digital picture of the bearers face. Signatures are not reproduced on the chip.
    The Zimbabwe government believes that the introduction and mass production of the new travel document will reduce the price of the document. Currently, an ordinary Zimbabwean passport costs US$50 while other regional countries charge less than US$30.
    Makone said that a new digitalized document would curb counterfeit documents and would also allow the country to match the rapidly adopted international ePassport standard.
    The deployment of the ePassport also coincides with the Foreign Ministrys new digitalized passport application processes, which allow residents to obtain passport applications online.
    Despite the online availability of ePassport applications, applicants will still need to go to the passport office to complete their applications in person, and will also require a national ID card in order to submit their application.

    Source: By Stephen Mayhew, http://www.biometricupdate.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  
    Trb has signed a new agreement to continue to provide electronic and secure polycarbonate data pages for Republic of Lithuania ePassports.
    According to the firm, the electronic data page is attached to the ePassport booklet through a patented and robust page binding element, and is designed for a lifespan of 10 years. Issuance of passports with an electronic polycarbonate data page started in January 2008. The chip stores personal data, a facial image and two fingerprints of the document holder.
    The latest contract builds upon a 2008 agreement which engaged Trb to supply highly secure polycarbonate data pages with embedded chip to the Lithuanian Personalisation Center of Identity Documents.
    The data pages are integrated into the Lithuanian passport booklets by UAB Garsu Pasaulis and then personalized by the Personalisation Center of Identy Documents, which is part of the countrys Ministry of Internal Affairs.
    It is widely recognised that the Lithuanian biometric passports are a valuable indicator of the countrys distinctive attitude to security-oriented innovation, said a Ministry of Internal Affairs official.
    ePassports, also known as biometric passports contain an electronic chip that is encoded with surname, given name, date of birth, place of birth and gender information. It also includes a digital picture of the bearers face. Signatures are not reproduced on the chip.

    Source: By Stephen Mayhew, http://www.biometricupdate.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Morpho has won another international call for tenders from the Finnish National Police Board to supply the countrys new ePassports, as part of a consortium including Oberthur Technologies. The consortium has been providing Finland with secure ePassports since 2006.
    Within the consortium Morpho provides the passport booklet which includes a set of new and improved security features on its polycarbonate data page. The data page also contains an integrated microchip which stores the holders personal details and biometric data (fingerprints and facial image). Morpho also supplies its ICAO PKI system and its personalization solution.
    With enhanced physical and electronic security features, Finlands new passport will provide greater protection against identity theft and fraud, and enable fast, secure identification of passport holders.
    Finland began issuing its new ePassports at the end of August 2012.

    Source: http://www.planetbiometrics.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Cash-strapped New York has tentatively chosen the highest bidder to produce drivers licenses under a disputed contract that would provide only black-and-white photos and end up costing the state nearly $38 million more than the current contract if its approved.

    According to court papers reviewed by The Associated Press, the losing vendors, including the company that has produced New York licenses with color photos for 16 years, are protesting the $88.5 million award to a Canadian company.

    The award to CBN Secure Technology Inc. of Ottawa is also being reviewed by the state comptroller.

    CBN is part of the Canadian Bank Note company that prints Canadian money, passports and drivers licenses worldwide. Company officials did not respond to repeated requests for comment.

    The DMV tentatively awarded the contract to the high bidder 10 months after New York advised the current vendor, De La Rue North America Inc., that because of significant budgetary constraints the state would have to reduce the cost of the contract, according to the court filings. As a result, De La Rue submitted a bid 10 percent lower for the new, eight-year contract, which ended up being nearly $38 million less than CBNs bid.

    De La Rue, based in England, and Massachusetts-based MorphoTrustUSA, another unsuccessful bidder, want a rebid.

    They claim CBN offered a black-and-white polycarbonate card they say is less secure than their color-picture IDs on cards made of Teslin. The losing bidders say they also werent informed the state wanted a black-and-white polycarbonate card and that CBN received an illegal advantage. De La Rue and MorphoTrustUSA said they could have offered a bid on that type which could save taxpayers money.

    The lawsuit also claims the state had required a color image ID, a requirement they claim CBN violated.

    The drivers license contract is rebid under the federal Real ID measure from the Department of Homeland Security to make licenses more secure and more states are expected to face similar contract decisions.

    The state Department of Motor Vehicles wont comment until the comptrollers review concludes and the contract award is final. State records show cost was valued at just 20 percent of the evaluation of bids, with a 30 percent emphasis on security. Other categories included production and quality control, the production site and data security, the imaging device and experience and expertise, according to the record.

    Trade publications note the CBN technology and black-and-white photos are well-regarded for security in drivers licenses and other documents.

    The losing companies claim poor judgment and mishandling of the bid is apparently to blame for the states decision.

    Polycarbonate and Teslin are both highly secure materials suitable for drivers licenses, said MorphoTrust Vice President and General Counsel Scott Boylan. The key differences are value and flexibility. Polycarbonate is far more expensive than Teslin while providing no additional security benefit. Teslin cards also can accommodate color photos, which enable more security features, whereas polycarbonates cannot.

    CBN failed a mandatory technical requirement which related to the ability to provide color text for the cards, a mandatory requirement, stated De La Rue in its lawsuit.

    State records show the DMV criteria for the bid, however, appear to not require a color image ID, according to a court filing.

    The state comptrollers office is now evaluating the bids.

    While I cant comment on specific contracts, our impartial review of bid protests is essential to protect New Yorkers from millions of dollars in unnecessary costs, said Kate Gurnett, spokeswoman for state Comptroller Thomas DiNapoli.

    Our bid exactly met the requirements of the (Request for Proposal) and at significantly less cost to the New York taxpayer, said De La Rue spokesman Rob Hutchison

    CBN and De La Rue are close competitors with a long history of providing secure documents including drivers licenses. CBN also holds government contracts to print postage stamps, passports and visas that must be counterfeit-proof.

    State records show no campaign contributions from its top officers to any New York officials. CBN, founded in 1897, also has a lottery systems division for gaming run by governments, but has no contracts with New York where Gov. Andrew Cuomo is trying to expand gambling.

    Source: http://libn.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  A UK-based military hardware manufacturer will open a Sh3.5 billion plant in Mombasa to capture the growing arms race in Eastern Africa as well as target peace-keeping missions.

    Osprea Logistics has started construction of the plant following approval from the Kenya Investments Authority to assemble armoured cars and military trucks under the Mamba brand which is commonly used by Africa Union peacekeepers, private contractors in Iraq and several African countries.

    This will be the first armoured vehicle manufacturer in the region and the company is targeting regional governments and peacekeeping missions in Congo, Sudan and Somalia, which are emerging as a fertile markets for military hardware.

    Osprea plans its first-year production of Mamba Mk5s to be over 100 vehicles, which can translate to work for over 200 people, said Salih Brandt, the chairman of Osprea Logistics in an email response to the Business Daily.

    Kenya is strategically located and offers great access to the rest of Africa compared to South Africa where Ospreras other manufacturing plant is.

    Mamba is a South-African made armoured personnel carrier that offers protection against small arms fire and land mines.

    Powered by a Mercedes Benz engine, it is suited for a rough terrain and can carry up to 10 passengers plus the driver.

    This has made it a favourite for military operations in remote zones and it became the face of the Iraq war following increased use by private security contractors.

    Rising threats of terrorism, cross-border raids and internal conflicts in East Africa have seen countries increase their military budgets.

    Kenya, Uganda and Tanzania have together increased their defense spending to Sh87 billion last year from Sh59 billion in 2007, according to data from the Stockholm International Peace Research Institute (Sipri), an independent research organisation.

    The data shows that Kenyas spending at Sh45.8 billion was far much higher than that of Uganda, which had a budget of Sh21 billion, and Tanzania whose budget stood at Sh22 billion.

    Kenya, last year, ordered 67 US-made heavy truck diesel engines from South Africa, 37 of which have so far been delivered at an undisclosed cost.

    Uganda also showed the highest number of military equipment imports among EAC member countries.

    Burundi depicted one of the highest military budgets on the continent according to Sipri making the region a good market for an arms manufacturer.
    The regions defense forces buy their armoured cars and trucks mainly from Russia and South Africa.

    There is a tangible move world-wide towards smart investing in defence budgets, with an emphasis on domestic procurement and industry in order to capture a dual benefit of domestic investing as well as platform efficiency, says Mr Brandt.

    Source: By RAWLINGS OTINI, http://www.businessdailyafrica.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The Smart Card Alliance has released its second annual E-Yearbook, highlighting the events that happened in the North and Latin American smart card industry throughout 2012.

    This years review contains industry briefs, perspectives, insights and company profiles covering a wide range of markets and technologies. It also contains an expanded section on the EMV Migration Forum, information about the new Mobile and NFC Council, highlights of Septembers Transportation Council meeting and reprints of white papers and position documents produced by the SCA throughout the year.

    The E-Yearbook is available at the SCAs website. The SCA will send printed copies to members and have them available at Alliance conference events

    Source: http://www.contactlessnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The UAE Central Bank and the Emirates Identity Authority have met to consider enhancing co-operation in regards to using the smart ID card and activating its applications in the financial sector.
    The two agencies discussed creating a joint committee to draft a strategic co-operation agreement that includes a number of initiatives aimed at promoting the culture of digital ID and knowledge-based economy, as well as enabling the UAE Central Bank to upgrade the performance of the financial sector while protecting the identity of consumers with the advanced features of the Emirates ID card.
    According to a report in The Emirates News Agency, the UAE Central Bank clarified that its draft strategic and operational plan includes an initiative for creating an e-wallet system using the ID card that would ultimately replace cash for the management and operation of the UAE Central Bank.
    Emirates ID says its ready to provide maximum support to ensure the success of all the development projects and initiatives that are implemented or planned to be implemented, as a part of the governments initiative to engage in a knowledge-based economy in a manner that serves the top interest of the UAE.
    As reported previously in BiometricUpdate.com, official transactions related to Emirates ID cards were disrupted for nearly two days following a technical glitch with its online e-form system.
    In 2009, Emirates ID developed a plan which contributed to doubling the number of population register and therefore, the fingerprints of individuals over the past three years by six times.

    Source: By Adam Vrankulj, http://www.biometricupdate.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The Egyptian government has recently approved a new smart card system for subsidized fuels, originally proposed by the ministries of finance and petroleum.
    The program, designed to ensure that those in most need of these subsidizes are indeed those who receive it, would charge the ministries of petroleum and mineral resources with implementing and overseeing the new smart card program for the National Bank of Egypt and Ahly banks.
    In this process, contracts were awarded to both government banks without a bidding process, in order to quickly implement the new laws to take hold in April, Daily News Egypt reports.
    Logistically, daily transfers will be made to companies producing petroleum products and will be represented in the difference in price for fully and partially subsidized fuel for the amount consumed through the smart card program. A database of beneficiaries will also be created.
    Many distribution programs like this take off without a hitch, but there are also those that encounter resistance along the way.
    Reported in BiometricUpdate.com, a system in India has been implemented which sees the production and distribution of biometric food ration cards, though members of an indigenous group have demanded the withdrawal of the cards, citing irregularities and complications in obtaining food.

    Source: By Adam Vrankulj, http://www.biometricupdate.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Gemalto is providing the Royal Oman Police with an electronic passport solution for the Sultanate. Applicants will be issued with secure travel documents in line with Omans goal to provide enhanced services and protection to its citizens, using digital security technologies. ??

    The solution includes Gemaltos ICAO compliant Sealys e-passport documents and a full Coesys solution suite to enroll citizens, personalize and issue secure documents. The multi-year contract also covers training, support and maintenance services.

    Major Royal Oman Police offices will be equipped with fixed and mobile stations to register e-passport applicants with personal information and biometric data. Each e-passport will feature secure embedded software and a contactless microprocessor which will contain the holders digital fingerprints and. The solution will facilitate Omani travelers immigration control, and speed up the passport application and document issuance process. ??

    In the public sector, Gemalto is contributing to more than 80 government programs worldwide, supporting for example e-passport initiatives in Cte dIvoire, Denmark, Estonia, France, Korea, Norway, Malta, Morocco, Portugal, Singapore, Sweden and the U.S.

    Source: http://www.secureidnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Libya has taken delivery of 49 armoured support vehicles from Jordan. Some 120 of the UAE-designed and built NIMRs, in two variants, have already been in service with the Libyan army .

    The spokesman for the Libyan General Staff. Ali Shiekhi was quoted by Chinese news agency Xinhua today as saying that the new NIMRs had been supplied as a result of an agreement made last year, between the Ministry of Defence and Jordan. The new armoured vehicles are to be deployed immediately on border patrol duties.

    More than 500 NIMRs have been sold, mostly in Jordan, Lebanon, Libya and the UAE, and the firm says that it has a further 1,800 orders. The composite ceramic-armoured NIMRs, which come in four and six-wheel variants and a range of configurations, are according to the manufacturers, the first such military vehicles to be designed specifically to operate in extreme desert conditions. NIMR Automotive which conceived and makes the armoured vehicle, is a part of the UAEs Tawazun conglomerate, which specialises in defence equipment. Algeria was last year seeking to establish a local plant to build and assemble NIMRs.

    Source: http://www.libyaherald.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  ABI Research forecasts 8.6 billion smart cards will ship in 2013, spanning all smart card markets. Of the total shipments, 16% are forecasted to use a contactless interface but that will rise to 30% by 2018.

    Government ID, transportation and ticketing, and payment cards continue strong double-digit growth in contactless adoption. Single-wire protocol SIM card volumes continue to strengthen, and are expected to break the 500 million mark in 2018.

    The increase in contactless adoption is not limited to a selection of markets, although its the banking and government verticals which are adopting contactless technology at a quicker rate, with the SIM market close behind, comments Phil Sealy, research analyst at ABI.

    Over the next three years ABI Research expects to see a shift in the penetration ratio of pure contactless and dual interface shipments. In 2013, ABI Research forecasts 59% of all contactless deployments will utilize a pure contactless interface, reducing to 38% in 2018.

    The increase in dual interface adoption is apparent across multiple markets. IC vendors NXP, Infineon, and STMicroelectronics are positioned to offer the best combination of convenience and high-end security over multiple applications. Additionally, the increase in dual interface adoption will deliver greater margins benefiting IC and smart card vendors alike.

    ABI Research tracks new services and credentials regionally, including governments issuing new national ID and social welfare cards, mobile network operators with SIM-based NFC payment services and wallets, and banks jumping to next-generation dual interface EMV cards, Sealy states. As a result ABI Research forecasts that dual interface shipments will exceed the 1 billion mark in 2015.

    Source: http://www.secureidnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The National Health Insurance Scheme (NHIS) will this year introduce biometric identity cards which will be issued instantly at the point of registration to subscribers.

    It would also start work on piloting electronic claims (E-claims) processing and host an extended stakeholder review of the capitation pilot in the Ashanti Region to inform its improvement and the subsequent nationwide rollout of this provider payment method.

    The Chief Executive of the National Health Insurance Authority (NHIA), Mr Sylvester A. Mensah, disclosed this when he addressed members of the core management team of the NHIS and some key stakeholders at a management retreat held at Elmina in the Central Region.

    Mr Mensah noted that although remarkable progress had been made in meeting targets, there was the need to consolidate those achievements and make the scheme more efficient, adding that 2013 would be a busy year for the authority.

    He said the NHIA intended to establish three more claims processing centres in the Northern, Central and Ashanti regions, to complement the centre in Accra. This, he maintains, would complete efficiency measures into claims management nationwide.

    Among other numerous initiatives, Mr Mensah disclosed that the scheme would be re-branded consistent with the new law, new vision and mission and operational architecture of the NHIS, adding that the financial manual of the NHIA would also be reviewed to place greater responsibility on the centre to prevent the abuse and fraud occurring at the regional and scheme levels.

    Others are: a permanent and joint clinical and claims audit team would be established to undertake forensic claims audit across the country all-year round to track isolated cases of connivance between schemes and providers.

    Mr Mensah mentioned that subscriber satisfaction was a key performance indicator for the NHIA, therefore, a subscribers handbook detailing the benefit package, medicines and subscriber rights and obligations would be compiled and made available to all subscribers at the point of registration and membership renewal.

    In order to further educate the public on the operations of the scheme, Mr Mensah said a quarterly NHIS policy dialogue forum to be beamed live on television stations would be instituted.

    Also, the NHIS medicines list/pricing would be reviewed to reflect market realities.

    He further said the authority would begin modernising and transiting from an ICT concept, which places more emphasis on infrastructure, to a management information system (MIS) which places premium on generating information for management decision-making.

    Among a litany of achievements recorded in 2012, he cited the passage of the new law, NHIA 2012, Act 852, the upward review of provider Tariffs by 26 per cent, creation of the condition to accommodate family planning in the NHIS benefit package, development of a consolidated premium account, the pilot of capitation in the Ashanti Region, the establishment of an operational call centre and functional clinical audit division.

    Mr Mensah told the management team that posterity will not forgive us if, in nurturing this infant institution, it slips into structural, operational, and financial inefficiency.

    The President of the Ghana Medical Association (GMA), Dr Kwabena Opoku-Adusei, who was present at the event, pledged his associations commitment to the NHIS.

    He gave an assurance that the GMA would continue to be a strong ally of the NHIS and would collaborate with the authority on the rollout of capitation across the country, if all their concerns were addressed.

    He said the GMA would continue to constructively criticise the NHIA to ensure that the scheme stands the test of time.

    Other participants and contributors included a former Health Minister, Dr Richard Anane, under whose watch the law which established the NHIS was passed in 2003 (Act 650), and other foreign delegations.

    Source: http://graphic.com.gh

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  New research from ABI Research forecasts 8.6 billion smart cards to be shipped worldwide in 2013; a combined number spanning all smart card markets. Of the total forecasted shipments, 16 percent are expected to use a contactless interface.
    ABI attributes most of this growth to the increase in adoption of Government ID, transportation and ticketing and payment card systems. In 2013, ABI forecasts 59% of all contactless deployments will utilize a pure contactless interface, reducing to 38% in 2018.
    According to the company, The increase in dual interface adoption is apparents across multiple markets. IC vendors, NXP, Infineon and STMicroelectronics are positioned to offer the best combination of convenience and high-end security over multiple applications. Additionally, the increase in dual interface adoption will deliver greater margins benefiting IC and smart card vendors alike.
    ABIs Market Data report focuses on the collection of primary data from leading manufacturers of smart cards and secure ICs. The data includes the installed base and annual shipments of smart cards and secure ICs by technology and interface type, by region and vertical markets.
    The increase in contactless adoption is not limited to a selection of markets, although its the banking and government verticals which are adopting contactless technology at a quicker rate, with the SIM market close behind, Phil Sealy ABI Research analyst said. ABI Research tracks new services and credentials regionally, including governments issuing new national ID and social welfare cards, MNOs with SIM-based NFC payment services and wallets, and banks jumping to next-generation dual interface EMV cards. As a result, ABI Research forecasts that dual interface shipments will exceed the 1 billion mark in 2015.
    Last year, in a Biometrics Research Note, Rawlson King forecasted that the market for electronic identity cards for which smart cards are often used will reach US$5.2 billion by 2015.
    Smart cards often carry biometric data of the card holder and are finding their way into many workflow processes, identity programs among a long list of uses.
    BluStor is an emerging player in the smart card market, currently developing a smart card with an 8GB capacity, to enable the downloading of apps and to verify identity absent of a data connection. BiometricUpdate.com recently had a chance to talk shop with CEO Finis Conner about how BluStor came to be, his ambitions as chief executive as well as what the future holds for his company.

    Source: By Adam Vrankulj, http://www.biometricupdate.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Papua New Guineas Defence Minister, Fabian Pok, says a two-million US dollar military aid grant from China will be spent on armoured cars, troop carriers and uniforms.
    The grant follows Dr Poks talks with his Chinese counterpart General Liang Guanglie in Beijing last month and meetings there with exporters of military ware.
    The visit comes as PNG plans a five fold increase in troops over the next decade.
    Dr Pok says PNG will also ask China to help maintain swimming pools and gymnasiums at PNGs military barracks.
    They want to be seen as not being too involved in our military issues here. China is also trying to export things like uniforms and armoured cars and all these things. So its also in the business interests of not the Chinese military but people who are building these things to market their products to countries like Papua New Guinea.

    Source: http://www.rnzi.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Frost & Sullivan has released new analysis stating that the global border control and biometrics market will see increased growth due to international cooperation. However, this growth may not be realized unless privacy issues are resolved and organizations are able to measure ROI.

    The analysis, Global Border Control and Biometrics Market Assessment, covers the security, military, government and law enforcement sectors of the industry. It found that the markets 2012 revenues were $5.8 billion, and it anticipates that the market will earn $15.8 billion in 2021.

    Frost found that one of the main drivers in this market growth stemmed from agencies and organizations working together on an international level to collaborate on travel security, which has led to more implementation of electronic documents and readers.

    Western markets have been at the forefront of this trend, with many countries having e-passports and testing eGates. Many pilot projects are taking place in Europe, with facial recognition technology being the preferred biometric modality. Russia is also looking into the use of biometrics as an identifier.

    Eastern markets, such as China and India, are just starting to incorporate e-passports and eGates into their travel processing systems.

    While the opportunity for growth is good, Frost does caution that budget cuts and privacy concerns could have a detrimental effect on plans to invest in biometric technology; however, cheaper technology and public education could mitigate those possibilities.

    Source: http://www.secureidnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  For many years now, IT professionals have become more and more active in discussions about physical access control systems and there has been an active debate about the need for convergence between physical and logical access. IT managers use electronic means to secure logical assets; security managers use physical access control methods to secure facilities. On the surface, it would seem that both departments would benefit greatly from collaboration since both of their problems boil down to permitting access to the right people.

    With such an obvious synergy and benefit to taking a more holistic view of enterprise security, why hasnt this yet happened? What are the real barriers preventing companies from moving in this direction?

    Perhaps one of the answers lies with the fact that weve been more focused on the what than the who. If organizations are really going to make a meaningful impact on protecting their assets, whether physical or virtual, its most important to focus on the whoand coordinating that task between IT and security is becoming important.



    Who was that (really)?

    Although privileges are assigned to people, its not always clear who is entering a password or who is carrying an RFID card. The risk of not knowing who varies from asset to asset. Is it enough to be the holder of a swipe card to enter a parking garage? Probably. How about to access a medical record? Absolutely not!

    It is in this context that biometrics is playing a larger role in securing facilities and assets of all kinds. With the introduction of multispectral imaging, biometrics has become reliable enough to deal with the fundamental issue of knowing who to a much higher degree of confidence.

    In fact, by linking physical identity to a myriad of digital identities, converged identity and access management solutions become much more powerful. There is no meaningful access management without first establishing the who in transactions. Who is accessing my facility? Who is punching the time clock? Who is withdrawing funds from that ATM? The question is always, Who?

    Thus, while access and authorization have always been granted to individual people, knowing a password or having a key is only superficially related to the authorized personand neither can establish who exactly that is. Only biometric technology can do that.



    Its more than just about security

    Weve all seen it: business grinds to a halt after the deployment of a new security system. Designing an authentication solution that is both secure and convenientthats where the value is for the customer.

    Convenience in an authentication solution is ease-of-use, accessibility, speed and all of the other things that become important to an organization after the primary objectivesecurityis met. Staffing help desks to reset passwords or reissue swipe cards while the employee is standing by is not an efficient use of resources. Nurses on a hospital floor cannot waste valuable seconds fumbling with the numbers and special characters in a password when accessing medical supplies.

    A biometric solution can lower risks, reduce costs and improve efficiencies. It can meet regulatory requirements, provide an audit trail and facilitate transactions, all without getting in the way of business. Today, biometric solutions authenticate people requiring access to secure facilities, sensitive records, government services and controlled substances. The possibilities and benefits are real if the biometric is chosen carefully.

    Security integrators are already aware that biometric technologies and scanners are not created equal. Some optical sensors work very well when the finger is clean and prepped with lotion. Is that convenient? Other sensors work perfectlyon the third or tenth try, while a line forms behind the user. These situations are the cases that cause security managers to abandon an application.

    On the other hand, multispectral imaging is capable of overcoming the myriad of fingerprint capture problems that conventional imaging systems have in less-than-ideal conditions. The high performance delivered by multispectral biometrics affects more than security, it allows authentication to recede into the background while authorized people go about their business. Thats no compromise, thats convenience!



    What about customers?

    Because biometrics can be so quick and easy to use, they are ideal for customer-facing applications. Today, financial institutions around the world are embracing multispectral fingerprint biometrics for authenticating customer transactions. In addition to enhancing transaction security, banks are able to provide additional convenience for their customers because there is no need for training; customers just present their finger at the ATM.

    Biometric patient authentication is becoming important for reducing medical errors and for minimizing fraudulent access to healthcare. Government and private insurance programs around the world rely on multispectral fingerprint biometrics to prevent fraudulent use of the policy. Officials at one government program report that the biometric deployment actually facilitates faster access to medical service by authorized patients while saving costs.

    Theme park access is a customer-facing application where convenience plays a special role. To prevent ticket fraud, one major international theme park wanted to be able to link each ticket to a specific customer. However, because the overriding goal was to create a positive environment for paying customers, there couldnt be even the illusion of a barrier between a customer and the park. The transaction had to be quick and intuitive for anyone to use. Its significant to note that this biometric solution did not require identification of the customer, assuring the privacy of guests. Multispectral fingerprint authentication was chosen for its reliability and convenience. As a result, the solution reduced transaction time, enhanced customer experience and reduced ticket fraud.

    This scenario is being repeated in other commercial customer-facing situations, such as membership-only fitness clubs, large sporting events, nightclubs and other places where its important to maintain convenience for the customer, even during an authentication transaction.



    Deploy an enterprise-wide

    authentication solution

    IT managers have their hands full. Threats are coming from every direction and on top of it all employees want to use their own devices. Users hate security solutions that simply get in the way of them doing their jobs. Multifactor authentication is becoming a must, but the difficulty of managing point solutions is increasing risk, not reducing it. And the smartest smartcard still cannot assure the organization that the person holding is it the person it was issued to. They need to know who.

    Security integrators know who. Theyve been integrating biometrics at the door for some time now. Perhaps its time to walk across the hall and have a conversation with the IT manager about integrating biometrics into an enterprise-wide authentication solution.

    Source: By BY PHIL SCARFO, http://www.securityinfowatch.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Brigadier-General Kwame Opoku-Adusei, the General Officer Commanding the Northern Command of the Ghana Army, on Tuesday said the government has purchased 34 armoured reconnaissance vehicles to argument the logistics of Ghanaian peacekeepers.

    The armoured vehicles are to facilitate the migration of Ghanaian peacekeepers from the Dry Lease to the Wet Lease system, Brig-Gen. Opoku-Adusei stated during Ghanbatt 77s Medals Presentation Parade at Lebanon.

    He said the military high command had outlined plans to provide logistical support for the migration of the Ghanaian contingent on peacekeeping duties in Lebanon (Ghanbatt) from the Dry Lease to the Wet Lease system to enable it to be self-sufficient.

    A Ghana Armed Forces statement issued in Accra and signed by Lieutenant Commander M. A. Larbi and copied to the Ghana News Agency (GNA) said the Commander of the Northern Command commended the Ghanbatt 77.

    I am personally satisfied with what I have seen and heard about your performance during my visit to the Ghanbatt Area of responsibility and I urge you all to continue with the good work.

    Brig Gen Opoku-Adusei, who was the head of a six-member military delegation to Lebanon, used the occasion to update troops on current developments in the country as well as within the Ghana Armed Forces.

    The Commander and his team also paid a courtesy call on United Nations Interim Force in Lebanon (UNIFIL) Deputy Force Commander, Brig Gen Patrick Phelan, who expressed appreciation for the performance of Ghanaian troops.

    The Commanding officer of Ghanbatt 77, Lt Col Francis Anemana, assured the delegation that Ghanbatt is poised in executing its assigned tasks successfully despite the challenges.

    Chief Military Personnel Officer, Col Reginald Yemo Odoi, thanked the government of Ghana for the high profile delegation to the Medals Day Parade and described Ghanbatt 77 as a wonderful battalion which executed its task with high professionalism to the admiration of UNIFIL High Command.

    Source: http://www.ghanaweb.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The Government of the Macau Special Administrative Region of the Peoples Republic of China has awarded a contract for the manufacture and development of smart ID cards for its residents.

    The new generation of ID cards will be purely contactless, and will store personal data and biometric information such as fingerprints on a digital chip embedded in the card. The IDs can be used as conventional IDs, providing sophisticated visual and electronic proof of identity, but will also allow citizens to carry out transactions with the government electronically, saving time and effort.

    The contactless system will also provide faster data transfer rates while card reading, useful especially for the large number of people who use their IDs in regular travel between Macau, Hong Kong, and China, as the processing time for travellers will significantly reduce. The new national ID card will also support contactless electronic signatures.

    A security protocol developed by Germanys Federal Office for Information Security will be used to ensure the security of data on the cards and during contactless transactions. Named PACE (Password Authenticated Connection Establishment), the protocol will create a secure connection between the chip in the card and a card reader, and encrypt data before the transfer.

    The contract for the manufacture and delivery of the cards was awarded to Munich-based technology company, Giesecke & Devrient. In addition to development and manufacture of the cards, G&D will develop the required smartcard applications and modify the existing infrastructure according to the needs of the new technology.

    The government will also receive an advanced operation system platform for smartcards, which will be ready to support additional features in the future, such as contactless payment. The new set of ID cards is expected to be introduced in October 2013.

    Source: By Sumedha Jalote, http://www.futuregov.asia/

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.