Welcome to tender impulse

 Algeria Tenders  2019/20

<<Back
SrNo. Description Deadline Date
1 Acquisition of equipment for combat swimmers- Underwater tractor, Vests, clothing and accessories for scuba diving 28/05/2020
2 supply, installation and commissioning of a (01) tactical simulator. 30/04/2020
3 Supply of Laparotomie Box for the Setif University Hospital Center during the year 2020 17/04/2020
4 supply of three (03) thermal maintenance cameras 29/03/2020
5 Acquisition And Implementation Of An Hr Information System 19/03/2020
6 Tender for supply of Baggage Scanner 16/03/2020
7 Tender for supply of multi zone Door Frame Metal Detector 16/03/2020
8 Supply, installation and commissioning of one (01) underwater detection simulator 08/03/2020
9 Supply Of Papers, Office Supplies, Computer Media Consumables. 06/03/2020
10 Acquisition Of Primers For The Benefit Of The Pasteur Institute Of Algeria" 03/03/2020
11 International Consultant - Family Therapy Expert 25/02/2020
12 International Consultant Trainer in Management of associative works 25/02/2020
13 CLOSED EARLY Consultant for Analysis of People / Groups Left Out - LNOB (Common Country Analysis of Algeria) 25/02/2020
14 Acquisition Of Computer Equipment 23/02/2020
15 Acquisition Of Computer Equipment 23/02/2020
16 Acquisition Of It Equipment 23/02/2020
17 Support for the effective and lasting political participation of women in elected assemblies 23/02/2020
18 International Expert for the preparation of a project targeting the Adaptation Fund in Algeria 17/02/2020
19 Recruitment of executives for the project "Conservation of biodiversity of world interest and sustainable use of systematic Eco services in cultural parks in Algeria" 09/02/2020
20 Supply Baggage Scanner - good quality - Tunnel size - minimum 600mm x 400 mm 05/02/2020
21 Supply of Multi Zone Door Frame metal detector 05/02/2020
22 Acquisition of two generator sets 02/02/2020
23 Creation of start-up and charging stations with generator set 02/02/2020
24 Acquisition of Video Surveillance Cameras Including related Accessories 22/01/2020
25 Supply, Delivery and Commissioning of Two (02) Self-propelled Bucket Sweepers 19/12/2019
26 Thirty-five (35) generators ≥ 250 Kva 19/12/2019
27 Radio communication equipment 15/12/2019
28 Acquisition of very high resolution satellite imagery for the benefit of the National Center for the Exploitation of Remote Sensing Satellites 11/12/2019
29 AVR card acquisition for onis visa 400KVA generator set 28/11/2019
30 Supply of medical equipment. 23/11/2019
31 Purchase of material handling equipment: - (02) self-propelled cranes of 45 T- (02) self-propelled cranes of 35 T; 28/10/2019
32 Purchase of material handling equipment: - (02) self-propelled cranes of 45 T- (02) self-propelled cranes of 35 T; 28/10/2019
33 Supply of three (03) thermal maintenance cameras 21/10/2019
34 Supply of three thermal maintenances cameras 21/10/2019
35 Underwater diving equipment 20/10/2019
36 Public tender for a crane with a lifting capacity of 100 tonnes 13/10/2019
37 Relative to the acquisition of computer equipment for the benefit of the BEJAIA CHU during the year 2019. 06/10/2019
38 Acquisition of fire-fighting equipment and different types of drying equipment. 30/09/2019
39 Fraud risk management software 22/09/2019
40 Fouiture, Installation and commissioning of medical equipment The deadline date shown is predictive deadline. Interested firms should contact tendering authority for exact deadline date 21/09/2019
41 Maintenance and repair anti-intrusion system for post offices for the NAAMA Wilaya Postal Unit 17/09/2019
42 Supply, installation and commissioning of a 13 m ka-band antenna 12/09/2019
43 Supply, Installation and Commissioning of Seven (07) Baggage Scanners (Grand Modele) 11/09/2019
44 Valves and PDR for SAMSON valve The deadline date shown is predictive deadline. Interested firms should contact tendering authority for exact deadline date 06/09/2019
45 Provision of specialized CBRN equipment for the training of personnel in charge of border control 03/09/2019
46 Supply of a 100 ton mobile crane. 03/09/2019
47 SUPPLY OF TEN (10) WATER CUT METERS The deadline date shown is predictive deadline. Interested firms should contact tendering authority for exact deadline date 11/08/2019
48 Acquisition of: -lot n ° 01: (06) trucks trays equipped with a crane; -lot No. 02: (01) flatbed truck fitted out for construction site (personal transport); -lot No. 03: (02) trucks maintenance station; -lot No. 04: (01) 32T flatbed semi-trailer; 09/08/2019
49 The acquisition of Three (03) Cranes of fifty-five (55) tones The deadline date shown is predictive deadline. Interested firms should contact tendering authority for exact deadline date 09/08/2019
50 Supply, delivery and commissioning of two (02) self-propelled bucket sweepers. The deadline date shown is predictive deadline. Interested firms should contact tendering authority for exact deadline date 05/08/2019
51 A type instrument landing system (PRMG) 30/07/2019
52 Supply of Measuring and Calibration Devices 16/07/2019
53 PDR SUPPLY FOR SPARTEK SURFACE GAUGES The deadline date shown is predictive deadline. Interested firms should contact tendering authority for exact deadline date 26/06/2019
54 Supply of Medicines 24/06/2019
55 Tenders are invited for PR1 concerning the supply of network equipment for a CCTV system. 21/06/2019
56 Study, supply and commissioning of 02 low voltage switchgear for the raw electric substations 3 for the Hadjar cement plant Soud. 21/06/2019
57 Acquisition of thirty (30) 4X4 VLTTs. 20/06/2019
58 Tenders are invited for Installation and implementation of the ims (inspection manager system) of the sh-fcp oc" 405b block 19/06/2019
59 Two (02) 70/20 tonne cranes of the SNEPA brand machine room for the Ras-Djinet thermal power plant. 18/06/2019
60 Supply, installation and commissioning of multipurpose operating tables for the benefit of ophthalmic equipment services 17/06/2019
61 Work of recovery Wall of fence in Tafraout / Medea.-Recovery works Fence wall in Ben Chicao / Medea 16/06/2019
62 TCE + Reconstruction Restoration Wall at El Attaf / Ain Defla. 16/06/2019
63 Repair work on blocks in TCE + VRD + Closing wall and waterproofing in Sidi Hadjres / M'Sila. 16/06/2019
64 Supply, installation and commissioning of Multi functional operating tables for ophthalmic equipment services 16/06/2019
65 Supply of Care Products and Dental Consumables / Blida 16/06/2019
66 SIX (06) HYDRAULIC CRAWLER EXCAVATORS 25T AND FILTER LOT 16/06/2019
67 Two (02) telescopic loaders without stabilizer with forks as well as a batch of filtration. 16/06/2019
68 Maintenance work rooms + cells for 15/06/2019
69 Tenders are invited for concerning the Supply of a unit at the level of Ouergla 4 RM in two lots: lots 01: Procurement in supply and consumables computer lots 02: Supply of computer spare parts and computer maintenance. 13/06/2019
70 Dix (10) aircraft electrical converters 13/06/2019
71 Supply of two hundred and forty-two (242) dome and spring loading trucks and tank wagons in two (02) 12/06/2019
72 Supply of light ammunition equipment. 10/06/2019
73 Concerning the monitoring and control of the construction work of a garrison circle of category 03 stars in Boussaada / 1 ° RM 06/06/2019
74 Concerning the follow-up and control of the construction work of a garrison circle of category 03 stars in Tiaret / 2 ° RM 06/06/2019
75 Concerning monitoring and control of the construction work of a family complex in Bousfer / 2 ° RM 06/06/2019
76 Concerning the follow-up and control of the work of realization of a garrison circle of category 03 stars in Tougourt / 4 ° RM 06/06/2019
77 Supply of twenty (20) off-road cranes with a capacity of 60 tonnes with a lot of spare parts 04/06/2019
78 One (01) 120 ton crawler crane. 03/06/2019
79 The purpose of this contract is to recruit Technical Assistance (TA) to support the implementation of the EU REFIN program. The mission of the TA will be to achieve the overall objective of the project, namely to improve the performance of the Algerian Public Financial Management (PFM), through significant support for the implementation of the Strategic Plan for Modernization of Finance. (PSMFP), including the establishment of an Integrated Budget Management System (ILS). 02/06/2019
80 TA6 concerning the acquisition of 1300 ethylometer devices 01/06/2019
81 Supply, installation and commissioning of high speed HDR brachytherapy equipment with peripheral equipment for medical physics 01/06/2019
82 Spare parts for AHV-IV seismic vibrators The deadline date shown is predictive deadline. Interested firms should contact tendering authority for exact deadline date 27/05/2019
83 Acquisition, installation and commissioning of medical simulation equipment 27/05/2019
84 Supply, installation and commissioning of optoelectronic laboratory equipment 27/05/2019
85 Medical simulation equipment. 26/05/2019
86 Optoelectronics laboratory equipment. 26/05/2019
87 Supply of refractory bricks and concretes for the years 2019-2020. 25/05/2019
88 Call for Tenders for the Restoration work in TCE + VRD for GT / GN units....The deadline date shown is predictive deadline. Interested firms should contact tendering authority for exact deadline date. 25/05/2019
89 Reconditioning of the peripheral lighting and the 04 BF for the benefit of a military unit 25/05/2019
90 Tenders are invited for The Acquisition of Computer Equipment From the University Blida2 Interested Tenderers May Consult and Withdraw the Specifications From the Commission 23/05/2019
91 Specific clothing for firefighters. 18/05/2019
92 Construction of a ammunition bunker including Zimmerman fence and merllonage for profit of a military unit/B A L and TINDOUF/3 ° RM 16/05/2019
93 The purchase of fire extinguishers 15/05/2019
94 ACQUISITION OF SMALL-SIZE AMMUNITION EQUIPMENT (7,62X54 MM) INCLUDING SPARE PARTS, INSTALLATION, COMMISSIONING AND TRAINING. The deadline date shown is predictive deadline. Interested firms should contact tendering authority for exact deadline date 13/05/2019
95 concerning the supply of the units of the first regional command of the National Gendarmerie in Blida in Spare Parts for various military vehicles 12/05/2019
96 Supply, installation and commissioning of the elevators, montes charges and sick montages 07/05/2019
97 Acquisition of a 130 ton capacity crane 06/05/2019
98 Supply of: Gas meter gasket 06/05/2019
99 Provision, installation and commissioning of seven (07) scanners and baggage (large model) 05/05/2019
100 Acquisition of Road Safety Equipment for the benefit of Urfunite in Algiers. 03/05/2019
101 30 ton telescopic cranes. 16/04/2019
102 One (01) all-terrain road crane of 250 tons; Lot2: (Due: 2019-04-08) One (01) 120 ton crawler crane. 08/04/2019
103 Supply and installation of 265 Km of horizontal signal equipment on the RN 06/04/2019
104 Acquisition of: -1: (Due date: 2019-04-04) 10 large aircraft oxygen fighters. -2: (Due date: 2019-04-04) 10 aeronautical air trolleys medium capacity. -3: (Due date: 2019-04-04) 10 medium capacity nitrogen trolleys. -4: (Due date: 2019-04-04) 10 medium capacity oxygen trolleys. 04/04/2019
105 Supply of following equipment One (01) 100 ton mobile crane. 29/03/2019
106 Work of realization of fifteen (15) type bunkers (10X15X5) + VRD to profit of a military unit / TINDOUF / 3 ° RM 25/03/2019
107 01 SNOW HUNTING TRUCK 20/03/2019
108 Tenders are invited for supply of one (01) submarine work diving equipment kit distributed in three (03) lots 18/03/2019
109 Acquisition Of One (01) Set Of Diving Materials And Underwater Works Set Out Into Three (03) Lots 1- Diving Material: 2- Underwater Tractor; 3- Kayak. 18/03/2019
110 Supply of a (01) kit of diving equipment and underwater works divided into three (03) lots as follows lot 1: Diving equipment. lot 2: Underwater tractor. lot 3: Kayak 17/03/2019
111 Circuit breakers 16/03/2019
112 ACQUISITION OF: PROJECT-: (EXPIRY: 2019-03-14) FIVE (05 ) SEMI-TRAILERS EXPANDABLE TRAYS. 14/03/2019
113 Supply and Operation of Two (02) Ammonium Nitrate Crushers with Metal Detectors. 13/03/2019
114 "Rehabilitation of the two (02) rolling cranes 70/20 tons of the engine room 12/03/2019
115 A fire truck for the Ghardaia unit. 11/03/2019
116 One (01) flatbed truck 07/03/2019
117 Acquisition of: -An industrial X-ray scanner 07/03/2019
118 Supply and installation of public address and conference systems for twenty-ten (26) blocks. 28/02/2019
119 Acquisition of CCTV cameras 19/02/2019
120 Acquisition of ten thousand (10,000) linear meters of FGS 500-7 conveyor chains for LPG Filling Centers. The deadline date shown is predictive deadline. Interested firms should contact tendering authority for exact deadline date 18/02/2019
121 Supply, installation and commissioning: -1: (Exam: 2019-02-13) Ballistic equipment for the benefit of a unit in Algiers. 13/02/2019
122 Supply, installation and commissioning: -1: (Exam: 2019-02-13) Ballistic equipment for the benefit of a unit in Algiers. 13/02/2019
123 Technical assistance with implementing the public finance management reform (UE REFIN) programme in Algeria 12/02/2019
124 AV1 for the acquisition of thirteen (13) track sweepers; 07/02/2019
125 Four (04) off-road self-propelled mobile cranes with a minimum lifting capacity of 45 tons 03/02/2019
126 Acquisition of a high-speed camera and a thermal camera. 27/01/2019
127 Two (02) Electric Concrete Pumps on Tractable Chassis 18/01/2019
128 Reheating of JET aircraft from 06 to 20 seats and medical aircraft in "ACMI" mode 11/01/2019
129 Expiry: 2019-01-07) 2.000.000 SAFETY LABELS 04 COLORS / SECURITY STICKERS 04 COLORS 07/01/2019
130 Acquisition of a solution for the management of banking risks / management of the incident database 05/01/2019
131 Supply and commissioning of two industrial vacuum cleaners for the foundry building of the agricultural tractors company. Lot 01: high power industrial vacuum cleaner. Lot 02: small industrial vacuum cleane 24/12/2018
132 Call for Preselection is in two (02) lots: Lot 1: Jet aircraft from 06 to 20 seats passenger version. Lot 2: 11/12/2018
133 Providers shortlisted for Tassili Airlines aircraft chartering requirements in ACMI mode. Lot N ° 01: Jet aircraft from 6 to 20 seats passenger version. Lot N ° 02: Medical aircraft (medical evacuation). 11/12/2018
134 Aftercature of Cargo Aircraft in Acmi Mode. 10/12/2018
135 THE AFFRETEMENT OF CARGO AIRCRAFT IN ACMI MODE 10/12/2018
136 AFTERCATURE OF CARGO AIRCRAFT IN ACMI MODE 10/12/2018
137 Supply of: Gas meter gasket Designation 10/12/2018
138 Providers for the needs of Tassili Airlines for the chartering of cargo aircraft in ACMI mode. 10/12/2018
139 Study, supply and commissioning of two 63KV HTB circuit breakers with 06 TC and 06 TP. 06/12/2018
140 Supply of circuit breakers on poles and accessories. 04/12/2018
141 Supply of: Lot N ° 01: (10) dump trucks 6x6 15 to 16M3 02/12/2018
142 Tenders are invited for Supply of circuit breakers 28/11/2018
143 Supply, installation and commissioning of three (03) 15.75 KV to SF6 main circuit breakers for the jijel thermal power plant. 28/11/2018
144 Design and printing- Support to the Constitutional Council 27/11/2018
145 SUPPLY OF COMPONENTS FOR LOW VOLTAGE ELECTRONIC METERS. 25/11/2018
146 Supply and commissioning of the medium voltage circuit breakers of the two substations MT PO and P00 of the cement company of Hadjar Soud. 20/11/2018
147 Supply of a rigid dump truck on tires. 12/11/2018
148 Supply of mobile scanner 09/11/2018
149 Supply of Dumpers 26/10/2018
150 Supply and installation of professional video equipment. 17/10/2018
151 Provision of Electronic Payment Terminals (EPT) execution of the associated services. 16/10/2018
152 The process of supplying 100 and 135 a low voltage contactors and photovoltaic cells 08/10/2018
153 Acquisition of components for the manufacture of 20,000,000 EMV chip cards distributed in 05 lots: Lot N ° 01: 20,000,000 cards (plastic support). Lot 02: 20,000,000 EMV chips (virgin). Lot No. 03: 20,000,000 of signature panel. Lot 04: 20,000,000 hologram. Lot N ° 05: 20.000.000 of Pin Mailers. 03/10/2018
154 Preselection with a view to establishing a short-list of satellite operators on behalf of Algeria Telecom Satellite. 25/09/2018
155 COMPONENT SUPPLY FOR LOW VOLTAGE ELECTRONIC METERS. 24/09/2018
156 EPC FO / SCADA system instrumentation of the LR1 / DLR1 structure. 18/09/2018
157 Deployment of radio and transmission sites 16/09/2018
158 Realization in epc system fo / scada instrumentation of the work OK1. Achievement in epc system fo / scada instrumentation of the work OK1. 11/09/2018
159 Provision of Electronic Payment Terminals (EPTs) and performance of related services. 11/09/2018
160 Supply, supervision of assembly and commissioning of two frequency inverters with new electric motors and new transformers for gas-fired furnace fans in place for the Ain El Kebira cement company. 09/09/2018
161 Acquisition of various detectors and explosives for fireworks. 02/09/2018
162 Acquisition of various detectors and explosives for fireworks. 02/09/2018
163 Acquisition and implementation of a human resources information system. 12/08/2018
164 SUPPLY AND INSTALLATION OF PROFESSIONAL VIDEO EQUIPMENT". 11/08/2018
165 Supply of seventeen (17) sanitary trailers. 02/08/2018
166 Provision of drilling fluids and solid / waste management services. 31/07/2018
167 CIRCUIT BREAKS HTA 55 MM. 30/07/2018
168 Acquisition of 04 hubs for shredders LOESCHE LM 36.41. 26/07/2018
169 05 6x4 dump trucks 02 2.5 T dump trucks Lot 3: 23 6x6 road tractors Lot 5: 05 120T heavy goods transport trailers 20 70T heavy equipment trailers 03 30T flatbed trailers 24/07/2018
170 Supply of 03 plate heat exchangers with a spare part lot (plate and joint kit), in its zinc electrolysis plant in Ghazaouet, Algeria. 21/07/2018
171 Supply of components for single-phase low-voltage electronic meters with GSM / GPRS / 3G modems. 19/07/2018
172 Supply of components for single-phase low-voltage electronic meters with GSM / GPRS / 3G modems. 19/07/2018
173 Supply of seventeen (17) sanitary trailers. 17/07/2018
174 Lot 01: 03 crawler trolleys. Lot 02: 08 articulated dumpers. Lot 03: 06 dump trucks 15m 15/07/2018
175 Acquisition of metro-Ethernet aggregation equipment with the objective of supporting all current and future services 15/07/2018
176 Purchase of reagents for the laboratory service of the Mohammedia Prefectural Hospital Center at the Prefecture of Mohammedia 12/07/2018
177 Transformers. 05/07/2018
178 Provision of GPS receivers. 02/07/2018
179 Ball valves with a diameter of less than 4 01/07/2018
180 Acquisition of: Lot n ° 01: Ball valves with a diameter of less than 4 ?? Lot No 02: Ball valves with a diameter greater than or equal to 4 ?? Lot No 03: Tapered ball valves Lot No 04: Valves with a diameter of less than 4 ?? Lot No 05: Gate valves with a diameter greater than or equal to 4 ?? 01/07/2018
181 Provision of one (01) seismic camp composed of twenty six (26) trailers (client, topography / observer, infirmary, health and laundry room 29/06/2018
182 Provision and commissioning of a multimedia broadcast / reception satellite platform. 28/06/2018
183 Supply of ten 8x4 12M3 mixer trucks as well as a batch of PDRs. 23/06/2018
184 Supply of: Lot N ° 01: Twenty (20) dump truck 6x4 14M3 so with batch of PDR spare parts. Lot N ° 02: Ten (10) dump trucks 6x6 15 to 16M3 so with batch of PDR spare parts. Lot N ° 03: Fifteen (15) 8x4 18M3 tipper trucks as well as batch of PDR spare parts. Lot N ° 04: Ten (10) Tanker trucks 6x4 20 000L so with batch of PDR spare parts. Lot N ° 05: Ten (10) Tank trucks 6x6 20 000L so with batch of PDR spare parts. 15/06/2018
185 Supply of: Lot N ° 01: Twenty (20) dump truck 6x4 14M3 so with batch of PDR spare parts. Lot N ° 02: Ten (10) dump trucks 6x6 15 to 16M3 so with batch of PDR spare parts. Lot N ° 03: Fifteen (20) 8x4 18M3 tipper trucks as well as batch of PDR spare parts. Lot N ° 04: Ten (10) Tanker trucks 6x4 20 000L so with batch of PDR spare parts. Lot N ° 05: Ten (10) Tank trucks 6x6 20 000L so with batch of PDR spare parts. 15/06/2018
186 Supply of laboratory equipment 14/06/2018
187 TENDER FOR THE DEVELOPMENT AND MODERNIZATION OF THE FINANCIAL SYSTEM - 12/06/2018
188 Supply of (11) ADR 20M3 tanks on trailers 05/06/2018
189 Supply of 03 SF6 60KV gas circuit breakers. 24/05/2018
190 Acquisition of manual valve for the GAZOUC GR7Ø / 48 "project (TD Metlili-Ta Hassi Rmel). 22/05/2018
191 Supply and installation of SCADA systems 22/05/2018
192 Acquisition of: -30 aircraft starters; -15 helicopter park starters; -10 aircraft electrical converters; -05 helicopter starters. 21/05/2018
193 Acquisition of 15 medium model aircraft tractors. Acquisition of 20 small model aircraft tractors. 21/05/2018
194 Supply and commissioning of a (01) explosives stitcher 20/05/2018
195 Supply and commissioning of a (01) explosives stitcher. 20/05/2018
196 Supply of safety gloves 17/05/2018
197 Supply of the following equipment: Accessories for MV / LV lines. 15/05/2018
198 Supply Of (07) High Pressure Washing Units 07/05/2018
199 Supply of (11) ADR 20M3 tanks on trailers 06/05/2018
200 Acquisition of an antenna of 4.8 meters diameter in C band and associated radio frequency equipment. 05/05/2018
201 Provision of one (01) seismic camp composed of twenty six (26) trailers 04/05/2018
202 Supply of an electronic document management system for engineering & construction projects. 03/05/2018
203 Supply and installation of SCADA systems 02/05/2018
204 Supply of electrical equipment for the DJENDJEN LOT 01 220/60 kV shielded substation 25/04/2018
205 Supply of safety gloves 24/04/2018
206 Full size cyber cyber simulator chair simulator. 24/04/2018
207 Full size cyber cyber simulator chair simulator 24/04/2018
208 Supply of: 15 9M3 mixer trucks 18/04/2018
209 Supply of the following equipment: • HP 160Kva circuit breakers 17/04/2018
210 Production of satellite fields ZEA, ROM, ZEK & ROM Nord. 14/04/2018
211 Supply of 03 SF6 60KV gas circuit breakers. 11/04/2018
212 Supply of 03 SF6 60KV gas circuit breakers 11/04/2018
213 Recruitment of technical assistance for the implementation of the public finance management reform (EU REFIN) 10/04/2018
214 On-call service of well testing with BRN, ROD and satellite separator 09/04/2018
215 Supply in a single lot of: Lot 1: Components + Equipment + Tools for the manufacture of gas meters. 04/04/2018
216 installation and commissioning of a video surveillance system 02/04/2018
217 Acquisition of fire protection vehicles SSLI (05) VIGP: Algiers (02), Annaba, Constantine and Oran 01/04/2018
218 Supply and installation of SCADA systems 01/04/2018
219 Petroleum equipment Supply of multiphase flowmeters 30/03/2018
220 Purchase of ground support equipment in 04 lots. 29/03/2018
221 Provision of vertical traffic signs-Supply and implementation of marking products. 29/03/2018
222 GAS INDUSTRIAL METERS 28/03/2018
223 Supply, installation and commissioning of a satellite telecommunication platform 28/03/2018
224 Acquisition and implementation of a human resources information system. 27/03/2018
225 Supply of three (03) 220 KVA generator sets. 22/03/2018
226 Acquisition of printing equipment for institutions of blind people. 21/03/2018
227 Acquisition of the spare part of the substations HT / 60 KV in two (02) 20/03/2018
228 Acquisition of ten (10) ADR bitumen tank trailers with a payload of 38 T 14/03/2018
229 Supply and installation of SCADA systems 12/03/2018
230 Supply of three (03) 220 KVA generator sets 12/03/2018
231 Supply of electrical equipment: LOT N ° 01: Protection and control equipment for (13) 60/30 kv substations 28/02/2018
232 Protection and control equipment for (20) 60/30 kv substations. 28/02/2018
233 Supply and commissioning of a three-phase transformer HTB / HTA DE 33MVA. 26/02/2018
234 Supply of components for electronic meters of medium voltage Modems Kits. 25/02/2018
235 Supply and installation of 03 parking management systems and 06 monetary tripods 24/02/2018
236 Software migration of IPBX from the SONATRACH telephone network. 22/02/2018
237 supply and installation of multi split air-conditioning equipment on terrace for one (01) block for administrative and technical use at the Tiaret wilaya 13/02/2018
238 Acquisition of an electronic document management solution with Workflow and a physical archive management module, with migration, personalization, integration, support, technical support and training services 12/02/2018
239 The acquisition of an Electronic Document Management solution 12/02/2018
240 Supply of components for electronic meters of medium voltage Modems Kits. 11/02/2018
241 The acquisition of wooden telephone poles 08/02/2018
242 Supply and installation of POS terminals. 01/02/2018
243 Rental of Bombardier DASH8-Q200, Q400 and BOIEING 737 NG simulators in Dry Lease and Wet Lease for recurrent training of Tassili Airlines crews 31/01/2018
244 Acquisition of spare parts for turbine generator sets type Ms 9001 E from HassiMessaoud West. 23/01/2018
245 Acquisition of rescue equipment. 22/01/2018
246 Establishment of short-list of suppliers for the supply and upgrade of the automation, instrumentation and communication systems 22/01/2018
247 Supply of 02 wheel loaders of 7M3 21/01/2018
248 Supply of cores with secondary winding ADD1 for circuit breakers. 17/01/2018
249 Acquisition of a high pressure generator for the riveting of the chassis. 11/01/2018
250 Twelve (12) towable generators 110 KVA 04/01/2018
251 installation and commissioning of a dematerialization solution of the means of payment by check in 03 02/01/2018
252 Supply of 14 excavator hydraulic excavators ≥48T. 31/12/2017
253 Acquisition of a multi-brand solution for the administration and supervision of TPE electronic payment terminals 30/12/2017
254 Acquisition of 07 track sweepers. 26/12/2017
255 Acquisition of vehicles: -06 heavy fire vehicles 5000 liters. -01 heavy vehicle foam spreader. -12 fast intervention vehicles 3000 liters. 26/12/2017
256 Acquisition of seven (07) track sweepers. 26/12/2017
257 Fire trucks 26/12/2017
258 Broadcast of all the programs of the channels of the Algerian Radio on the Internet network (Streaming) 25/12/2017
259 Broadcast of all the programs of the channels of the Algerian Radio on the Internet network (Streaming) 25/12/2017
260 Delivery of 25 armored post trucks 22/12/2017
261 Supply of a machine simulator for the ships technical equipment: -Power engines. -Hydraulic, electric, refrigerating, steam and auxiliary installations 11/12/2017
262 IMPLEMENTATION OF AN ELECTRONIC DOCUMENTUM MANAGEMENT SYSTEM (EDMS) DOCUMENTUM FOR THE BERKINE GROUP 08/12/2017
263 Acquisition of a (01) unit of measurement of AM, FM, TV and FH radio signals in fixed mode. 07/12/2017
264 Acquisition of CCTV cameras. 06/12/2017
265 Supply of eight (08) off-road trucks and one (01) lot of spare parts, divided into two (02) lots: Lot 01: Six (06) 4x4 flatbed truck with crane Lot 02: Two (02) trucks 4x4 dump truck 05/12/2017
266 Acquisition of a high pressure generator for riveting chassis. 05/12/2017
267 Supply of electrical spare parts for control and protection of substations, Boosting units and new Glycol units of modules 0 and 1 for the Hassi R? Mel Region, distributed in three (03) batches, namely: Lot N ° 01: Electrical spare parts for MCC and MT and LV circuit breakers for Boosting units 04/12/2017
268 Supply and commissioning of the medium voltage circuit breakers of the two MV PO and PO electrical substations of the Hadjar Soud cements company. 04/12/2017
269 Acquisition of 30 LV / HV Transformers 03/12/2017
270 Acquisition of 30 LV / HV Transformers 03/12/2017
271 Installation and commissioning of a (01) 4.8-meter diameter antenna in c-band and associated radio frequency equipment. 03/12/2017
272 Acquisition of converters, UHF links and YAGI antennas (in Three (03) separate lots) in accordance with the p 03/12/2017
273 Acquisition of civil engineering equipment: Lot 1: 10 Wheel loaders Lot 2: 07 Graders Lot 3: 02 Pipe loaders Lot 4: 07 Bulldozers Lot 5: 19 Crawler excavators 01 Excavator equipped with rock breakers 02/12/2017
274 Installation of Biometric System 29/11/2017
275 Acquisition of the spare part of the HT / 60 KV substations in two (02) separate lots: -Lot N ° 01: Electrical substations HT / 60 KV? ABB; -Lot N ° 02: Electrical substations HT / 60 KV? SIEMENS. 16/11/2017
276 -Acquisition of 10 dynamic converters of frequency 30 kva, 400 hz. 16/11/2017
277 Supply Of Semi Trailer Truck For UNHCR Tindouf, Algeria 13/11/2017
278 Supply, Installation and Commissioning of Gas Meters for Oil Pipeline, PRS and Terminal Supply LPG Pumping Stations 09/11/2017
279 Supply and commissioning of a satellite multimedia broadcasting / reception platform 08/11/2017
280 Supply and commissioning of a satellite multimedia broadcasting / reception platform 05/11/2017
281 Providing and commissioning of 02 tracked lawnmowers 05/11/2017
282 Acquisition of medium voltage and low voltage circuit breakers 30/10/2017
283 Acquisition of: Lot 01: LPG refrigerant exchanger Lot 02: Deethanizer condenser heat exchanger Lot 03: Condensate stabilization column feed preheater 27/10/2017
284 Provision of accessories for armed land including the execution and technical assistance for the completion of the western ramp of the expressway Bousmail Cherchel (wilaya of Tipaza). 27/10/2017
285 Acquisition of three (03) torque converters for the frame 9 groups of the HMO. 24/10/2017
286 Acquisition of spare parts for transmitters and FM radio rebroadcasters 24/10/2017
287 Supply of compactors and loaders 16/10/2017
288 Supply of transport equipment divided into 11 lots: Lot N ° 01: 10 dump trucks 16/10/2017
289 Supply of components for electronic meters 15/10/2017
290 Supply of six (06) generators and one (01) batch of spare parts: Lot N ° 01: Four (04) 110 KVA towable generators. Lot N ° 02: Two (02) generators 45 KVA. 04/10/2017
291 Supply of a downstream furnace support for the Meftah cement plant. 04/10/2017
292 Provision of logistics services (International freight forwarder). 22/09/2017
293 Supply, installation and commissioning of a satellite telecommunication platform for the provision of broadband internet access 21/09/2017
294 Providing the installation and commissioning of a satellite telecommunication platform for the provision of broadband Internet access. 21/09/2017
295 Acquisition of 10 armored vehicles 20/09/2017
296 Acquisition of three-phase electric transformers Lot n ° 01: Electric power transformers. Lot n ° 02: Electrical distribution transformers. 19/09/2017
297 SUPPLY OF TWO MIXED-TYPE FIRE FIGHTING VEHICLES AND POWDER WITH REPLACEMENT PARTS, ACCESSORIES AND RELATED SERVICES FOR THE GL1Z COMPLEX ". 18/09/2017
298 SUPPLY OF TWO MIXED-TYPE FIRE FIGHTING VEHICLES AND POWDER WITH REPLACEMENT PARTS, ACCESSORIES AND RELATED SERVICES FOR THE GL1Z COMPLEX ". 18/09/2017
299 Protective and control equipment for (13) 60/30 KV substation 13/09/2017
300 Supply, installation and commissioning of Gas meters for Pumping Stations Pipelines, PRS and Terminal arrival LPG 11/09/2017
301 Supply of six (06) fire-fighting, diesel-powered pump units with a throughput of 120 m3 / h, accessories and spare parts. 09/09/2017
302 Provision and supervision of the installation and commissioning of six (6) 5.5 KV electrical cabinets equipped with a circuit-breaker and its associated circuits for the GL2Z Complex. 03/09/2017
303 PROVISION OF TWO MIXED-TYPE FIRE FIGHTING VEHICLES AND POWDER WITH REPLACEMENT PARTS, ACCESSORIES AND RELATED SERVICES FOR THE GL1Z COMPLEX ". 01/09/2017
304 Vehicle Purchase (4X4) Medical Type B Ambulance. Factory Acceptance Test (FAT) for two GSA representatives is mandatory before delivery of the ambulance 17/08/2017
305 Acquisition of fixed and embedded INMARSAT C satellite radio station. 17/08/2017
306 Foumiture and installation of a complete solution of digital management of archives for the benefit of the Command of the National Gendarmerie 15/08/2017
307 Implementation of an Electronic Document Management System (GED) for the REGGANE GROUP 10/08/2017
308 Supply, installation and maintenance of POS terminals 09/08/2017
309 Provision of logistics services (International freight forwarder). 08/08/2017
310 Acquisition of ballistic materials 07/08/2017
311 Acquisition of ballistic materials 07/08/2017
312 Provision of 1 000 000 RFID tags for gas meters 07/08/2017
313 66/2017 / A1 - Civil works for the installation of a video surveillance system 27/07/2017
314 Supply, installation and commissioning of a CNC boring machine. 26/07/2017
315 Acquisition of 10 armored vehicles 25/07/2017
316 Acquisition of: Five (05) Tractors 6X4 of 160 Tons of PTRA. 23/07/2017
317 The object of which is to acquire ten (10) armored vehicles. 11/07/2017
318 Acquisition of cold protection clothing 10/07/2017
319 Acquisition of 700,000 combat belts 19/06/2017
320 Purchase graders 01/06/2017
321 Excavators and bulldozers 27/03/2017
 country Description 

 Procurement News 
  •  This provides for control of surface transportation and better utilization of roads and networks. NextTraffic
  •  The statement quoted Mr Robert Dickerman, the Chief Executive Officer of EEDC, as expressing hope that the use of meters would boost revenue collection and reduce lost of energy.
  •  Speed Identity has supplied 35 biometric data capture stations and 200 fingerprint readers to Moldova as a result of an EU-supervised tender aiming to increase security and quality of the country’s passports.

    According to Speed Identity, as part of the EU programme, countries with high volumes of people entering the EU, receive support in project management, know-how and financing by the EU in establishing reliable, high-security ID documents for travel. Moldova’s new ePassports now include digital, ICAO-compliant facial photos and fingerprints, as well as a number of other document security features to prevent forgery and the creation of false identities.
    Speed Identity says its Speed Identity SCL1000 (Speed Capture Light station), is a proven all integrated solution for instant live capture of facial photos, fingerprints and digital signatures. It has been in use with national authorities in Luxembourg and Sweden since 2008, in both mobile and fix-mount applications. The Speed Capture API has enabled the systems integrator to easily develop a customized enrolment workflow application controlling all features of the capture system, from data acquisition and photographic illumination, to data quality control and file output.
    “This is an important project where Speed Identity, being the expert partner, contributes in upgrading a non-EU country to comply with EU and ICAO regulations for travel document security. Normally such projects require a period of fine-tuning the system after implementation, but we have confirmations from the end user that the deployment phase went very smoothly,” says Magnus Löfgren, CEO at Speed Identity.

    Source: http://www.securitydocumentworld.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Regulating body armour won’t stick, said retailers.

    Starting June 15, Albertans who own or want body armour need a legitimate reason under the Body Armour Control Act, or a permit from the Solicitor General and Public Security office.

    Officers will soon be able to charge people wearing bullet or stab-resistant vests, along with seizing the armour if they don’t have a permit. And those people can expect to pay a fine up to $10,000, along with serving six months in the clink.

    “Police now have another resource in their fight against gangs in our communities,” said Jonathan Denis, Alberta’s Solicitor General and Minister of Public Safety.

    “This initiative doesn’t penalize those with a legitimate reason to wear body armour, such as police or security personnel.”

    Albertans with professions in policing, security or safety are exempt from the act, while everyone else needs to explain themselves to the solicitor general and public security office.

    A body armour permit costs $50 per year and takes five days to process. Citizens have to pass a criminal background check in order to get a permit.

    Gordon McGowan, president of rearmament distributor MilArm in downtown Edmonton, thinks the act is “a knee-jerk reaction to a nonexistent problem.”

    Body armour vests are just an Internet search away from anyone who wishes to hide their purchase from the government, McGowan said.

    “If I have a reason to own body armour and I want it, why is it up to the government to determine if my reason is legitimate or not?” McGowan asked.

    Milarms carries around a dozen VestFriend stab-resistant vests and McGowan said they sell only a few each month. Their most common body armour buying customers are nightclub owners looking to equip their bouncers and doormen.

    He has a strict store policy not to sell body armour to civilians, which keeps the gang-bangers from inquiring said McGowan.

    Source: BY MATT DYKSTRA, http://www.edmontonsun.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  AMMAN -- An armoured vehicles manufacturing plant was inaugurated at the Zarqa Free Zone on Tuesday. The JD2 million Jordanian and Russian investment will provide regional countries, particularly the Iraqi market, with bullet resistant cars, generating around JD24 million in production annually, according to plant Executive Director Ahmad Suleiman.

    Built on a 3,200 dunums of land, the factory will employ 100 workers from the local community and exploit 80 per cent of the national resources, said Nasser Shreidah, chairman of the Jordanian Free Zones Corporation. He added that the plant, the first of its kind in the region, will provide the regional market with highly developed bulletproof vehicles according to European standards.

    Source: http://www.zawya.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  New legislation to guard against the use of body armour and fortified vehicles by gang members goes into affect this weekend. People who either have or sell the armour must now have proper licenses or permits. However licensed security guards, and corrections officers are exempt. Anyone driving or owning a vehicle that has been adapted to resist bullets or explosives must also have a special permit. All armoured vehicles must also be inspected. Failure to comply results in fines in the thousands of dollars, and possible incarceration.

    Source: http://www.cjob.com,

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Visiongain’s analysis indicates that the global military body armour and personal protective gear market will be worth $1.07bn in 2012. The Military Body Armour & Personal Protective Gear Market 2012-2022 report finds that spending on military protective gear and body armour, despite pressure in the form of defence cuts from many predominant military nations, will remain central to defence budgets worldwide.

    The visiongain author of The Military Body Armour & Personal Protective Gear Market 2012-2022 report commented that: “Spending by militaries worldwide on body armour will remain a fundamental aspect of defence budgets for years to come, as despite budgetary pressures affecting many Western nations at present, an underlying desire and responsibility to provide the best protection to military personnel will spur demand for new and advanced equipment”.


    The report contains 100 tables, charts and figures that quantify and forecast the military body armour & personal protective gear market. Visiongain provides forecasts for the period 2012-2022 in terms of value (US$) for the military body armour & personal protective gear market 2012-2022, as well as for 3 submarkets and 12 leading national military body armour & personal protective gear markets. The report provides profiles of 20 leading companies operating within the market, and includes 3 interviews with experts in the field military body armour, providing specialist insight alongside visiongain analysis.

    The Military Body Armour & Personal Protective Gear Market 2012-2022 report will be of value to current and future potential investors in the field of body armour, as well as companies and research centres who wish to broaden their knowledge of the military body armour & personal protective gear market.

    For sample pages and further information concerning the visiongain report The Military Body Armour & Personal Protective Gear Market 2012-2022 please visit: www.visiongain.com/Report/794/The-Military-Body-Armour-Pe...

    For an executive summary of this report or to order it today please email:
    Sara Peerun at sara.peerun@visiongainglobal.com
    Tel: +44 (0) 20 7336 6100


    Source: http://www.openpr.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  OSWEGO — Aging police vehicles are slated for discussion during tonight’s Administrative Services Committee meeting, as Oswego’s police chief submitted five requests to bolster the department’s fleet, which would include the addition of an armored surplus military vehicle.

    Oswego Police Chief Tory DeCaire is asking councilors to approve the purchase of a 2012 Chevy Tahoe and a 2012 Chevy Impala. The vehicles would be purchased at or below New York state contract pricing and the funds would come from the police department’s existing budget allotment for vehicles and equipment.

    Also up for discussion is the additional purchase of a 2012 Chevy Tahoe as part of the “Operation Stonegarden” grant administered through the U.S. Border Patrol. According to the Department of Homeland Security website, Operation Stonegarden accepted competitive proposals for $46.6 million available in 2012. The purpose of the grant money is to enhance “cooperation and coordination among local, tribal, territorial, state and federal law enforcement agencies in a joint mission to secure U.S. borders along routes of ingress from international borders,” including Canada and Mexico as well as international water borders.

    Along with the updated traditional fleet vehicles, DeCaire is also seeking to acquire a used “up-armored” surplus military vehicle. Administrative Services Committee Chairman Ron Kaplewicz, R-7th Ward, said he looked forward to hearing about this unusual vehicle. “I’m sure the chief will tell us what it’s all about,” the chairman said.

    DeCaire noted in his request that there is no cost for the surplus military vehicle, as it will remain the property of the U.S. Department of Defense. He noted there would, however, be some cost associated with shipping the vehicle. The committee agenda described the “up-armored” addition to the fleet as useful to the police department in quality-of-life enforcement and outreach programs, as well as being available for use in the event of an armed emergency situation.

    Rounding out the department’s vehicle requests, the police chief would also like to accept a used 1998 Ford pickup truck as a result of a civil forfeiture. If the department of public works deems the vehicle safe, police plan to use it during investigative work. If the vehicle is deemed unsafe, it will be turned over to the DPW for disposal at auction or other approved means.

    During last year’s budget negotiations on Aug. 2, DeCaire informed council members that his request of $84,000 for equipment, which included three new police vehicles, had been reduced to $32,000 in the mayor’s proposed 2012 budget. That would be enough to buy only one new fully equipped police vehicle. The police chief noted that his department used to have a car replacement policy, with two new vehicles included in the budget each year to replace those in the fleet that had acquired high mileage and other maintenance problems from constant use.

    “Then we were told, ‘No cars,’ and we got behind the eight ball,” he told councilors at the time. “To maintain our cycle, we need two vehicles.”

    Councilors Mike Myers, R-2nd Ward, and Shawn Walker, R-4th Ward, looked for ways the city budget could accommodate the police department’s needs. City Chamberlain Deb Coad noted before the finalized budget that there were a few key items that had changed since she and former Mayor Randy Bateman had put the initial proposal together and she re-examined it to see if there was possible funding for an additional vehicle. As a result, additional funds were delegated to the police department, increasing the equipment line to $58,000 in the final adopted budget.

    Even though Crown Victorias would no longer be produced, DeCaire believed at the time that there should be enough of these police vehicles to supply his department through 2012.
    Other committee matters up for discussion will include the request to forward a zone change request at 253 W. Utica St. from an R-2 residential to a B-1 neighborhood business district; a request from the city’s purchasing agent to forward to the Common Council a resolution to accept the lowest bid submitted by WD Malone Trucking & Excavating Inc. in the amount of $1,341,736.00, for the Sanitary Sewer Rehabilitation project, Area 1-Turrill Street Basin; a discussion by the city’s fire chief regarding “special details” for the city’s ambulance service; and a proposal from the DPW commissioner for a life jacket loaner program.

    Committee meetings are held in the council chambers on the second floor of City Hall and begin at 7 p.m.

    Source: By JANET REBEOR-DEXTER, http://palltimes.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  RR Donnelley isn’t a name you see very often in TechCrunch, but companies don’t survive for nearly 150 years without having one eye trained on the future. With 2011 revenues at an estimated $10.6 billion, the company is one of the world’s largest commercial printers. The printing giant has been stepping up its digital investments of late, and today announced that it has invested $2.5 million in Real Value Corporation, the makers of iPad shopping app, CoffeeTable.

    The Series A investment is the first tranche of a larger investment by RR Donnelley and includes an exclusive marketing relationship between the two companies. CoffeeTable will be using the infusion of institutional capital to launch new personalization and engagement features and hire developers.

    For those unfamiliar, CoffeeTable is a free shopping app for the iPad that aggregates hundreds of retail catalogs to allow users to browse their products on the go, online or offline. CoffeeTable gives shoppers the ability to make purchases from their iPad through secure in-app checkout, while in turn giving retailers a suite of benchmark data and catalog analytics tools that they can use to boost their multi-channel marketing efforts.

    As RR Donnelley is one of the largest printers of retail catalogs in the world, it can now leverage its existing relationship with retailers to help bring CoffeeTable access to a wide range of content from the companies whose products it aggregates, while, in turn, giving those major retailers an additional point of access into the tablet market.

    CoffeeTable’s app allows users to browse full-screen images of products, with zoom functionality, adding products to a shopping cart, both online and offline. Users can subscribe to their favorite brands and have the latest catalogs delivered to their iPad from retailers that include Crate & Barrel, Lands’ End, West Elm, etc. Beyond offering quick checkout across all catalogs through its “Express Checkout,” CoffeeTable also offers giveaways, seasonal pop-up shops, and flash deals which are applied at check out.

    Catalogs are collectively a $270 billion industry, and while individual retailers may offer their own tablet shopping apps, CoffeeTable brings them all together in one place, presumably offering a better shopping experience for the end user. Together, the two companies seem to be looking to establish an Amazon for retail catalogs, and with further development of analytics tools, retailers will be able to get a better sense of the mobile purchasing behavior of consumers — something many of them are lacking.

    Source: http://techcrunch.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  A new blast defence mechanism could double vehicle protection against mine explosions without additional armour, according to its inventor.

    The active belly plate system developed by Advanced Blast & Ballistic Systems (ABBS) exerts a force against the floor of the vehicle to reduce floor deformation and help stop the vehicle from being thrown into the air.

    The technology, which has been taken to proof-of-concept stage, works by exploiting the short delay between a mine going off and the explosion hitting the underside of the vehicle, using this time to counteract the force of the mine.

    ‘Originally I was dealing with the global acceleration, which is the vehicle jumping in the air, and that on its own can kill you,’ Roger Sloman, managing director of ABBS and inventor of the system, told The Engineer.

    ‘And then I thought that if you put the force down a column in the vehicle onto the belly plate, you can keep the floor down as well, which is even more important. So it’s a very simple concept of actively opposing the force of the mine.’

    Because it deals with global acceleration, the technology should protect lighter cars as well as armoured vehicles. ‘You don’t carry around huge amounts of mass to counteract the blast,’ said Sloman. ‘You can double the mine blast capability of a system, at least.’

    The system detects the shockwaves of a blast, which travel at the speed of sound and arrive around 20 milliseconds before the mass of the explosion, providing enough time for the belly plate to react.

    ABBS received £116,000 from the Ministry of Defence’s Centre for Defence Enterprise to develop the technology and is now seeking funding to build a commercial prototype of the device.

    Sloman said it could be further developed to provide specific forces to match each explosion. ‘Either you can set everything off or you can analyse the strength of the shockwave and get an estimate of the size of the mine and where it is and therefore you can tune the response.’

    Source: By Stephen Harris, http://www.theengineer.co.uk

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  A liquid body armour is being developed by BAE Systems (a global defence company) that hardens on impact. The liquid is made up of "freely suspended" particles that "lock" together when disturbed. The benefits include its lightness, flexibility and a reduced injury risk compared to alternatives such as Kevlar.

    Self-sculpting smart sand

    Researchers at the Distributed Robotics Laboratory of MIT are developing robotic cubes that will work like smart self-sculpting sand. In one experiment, one-centimetre-squared cubes contained a microprocessor cabable of storing 32 kilobytes with tiny magnets on the edges that could enable the formation of complex 3D shapes.
    Via BBC.

    Make your own robot

    Another MIT initiative may allow people with no specialised training to become robotics engineers thanks to the ubiquitous technology of 3D printing. If a bespoke robot is required, any individual could download a blueprint, tweak it to suit their need and print a rudimentary robot that will be fully functional within 24 hours.

    Source: http://www.nzherald.co.nz

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  MEPs in Strasbourg have questioned the European Commission (EC) about the security of biometric passports following reports of problems with the documents in a number of countries including France and the Netherlands.
    Back in 2008, the European Parliament (EP) identified weak points in the system including problems with the reliability of fingerprints taken from children and the elderly; error rates; lack of experience of the technologies being used; and the risk of fraud at various stages of document deployment. As a result, the EP asked the EC to commission studies into these areas, which are expected to conclude later this year.
    According to the EP, between 500,000 and 1 million of France’s 6.5 million biometric passports in circulation are estimated to be false, having been obtained using counterfeit documents.
    In the Netherlands, an examination of 448 cases by local the authorities in Roermund found that 21% of the fingerprints were non-verifiable and therefore useless.
    As a result, MEPs invited EC representatives to a plenary session on 19 April 2012 to respond to their questions about the effectiveness of biometric passports. They have also asked if it will now consider re-evaluating the rules governing the issue of ePassports in the EU.

    Source: http://www.securitydocumentworld.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The U.S. Government Printing Office (GPO) has produced 75 million electronic passports at its secure production facilities in Washington, D.C. and Stennis Space Center in Mississippi.

    The electronic, or e-passport program, launched in 2005 and includes an integrated, secure chip and antenna incorporating numerous security features. GPO and the Department of State developed the U.S. e-passport in response to the requirements for Visa Waiver Program countries in the 2002 Enhanced Border Security and Visa Entry Reform Act.

    The Department of State loads personal information, including the traveler’s photograph, digitally onto the chip in each passport. This is the same data that is visually displayed on the photo page of the e-Passport. No personal data is handled by GPO or its suppliers.

    “We appreciate GPO’s continued support of the Department and our efforts to modernize the U.S. passport. Passport issuance, a function of the Department’s Bureau of Consular Affairs, is our most visible domestic public service program,” said Michael D. Kirby, principal deputy assistant Secretary of State for Consular Affairs.

    Source: http://www.contactlessnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  China’s Ministry of Public Security announced that after three years of preparations, the authorities countrywide will start issuing electronic ordinary passports from May 15 onwards.
    Photos

    View photos
    Related Articles

    China to pilot emissions trading system
    China standardises social security cards
    Sri Lanka to launch e-passport services

    Related Categories

    CENTRAL GOVERNMENT
    GOVERNMENT SECURITY

    From this Section

    NEWS

    The e-passport will contain an electronic chip, which stores personal information of the holder, including name, data of birth, photo, fingerprint and signature.

    The Ministry says that the e-passports are compliant with standards released by ICAO (International Civil Aviation Organisation), ensuring security and privacy of the personal information of holders.

    The application process will largely remain the same, with two additional steps to collect the applicant’s fingerprint information and signature. Citizens who are under 16 years old or whose fingerprints are missing are exempted from the fingerprint collection process, according the Ministry.

    The new e-passports will have a refined design, with images representing the 31 provincial level jurisdictions, Hong Kong & Macau Special Administrative Regions, as well as Tiananmen, the Great Wall and the Temple of Heaven.

    The Ministry says that more than 10 million passports were issued countrywide last year. And this figure is expected to rise by 20 per cent this year.

    Since 2004, more than 90 countries and territories have started issuing e-passports. And China started issuing electronic official & diplomatic passports last year.

    Source: FutureGov- Asia
  •  MONEY printer De La Rue has cashed in on strong demand for banknotes and passports but stayed quiet over talk it was stockpiling new Greek drachmas.
    The group, which produces more than 150 national currencies, stamps, driving licences and cash sorting equipment, printed 6.4 billion banknotes last year, 8 per cent more than the previous year.
    The start of production on a UK Government deal to produce passports also contributed to a 73 per cent rise in annual profits to £57.7million on revenues up 14 per cent to £528million.
    The firm has won contracts from countries such as South Sudan, which introduced a new currency following independence.
    But it stayed tight-lipped on talk that it had drawn up draft plans to print a new Greek currency should Athens quit the euro.
    De La Rue said last year that the eurozone’s problems could create opportunities.
    Chief ­executive Tim Cobbold said: “It’s always our policy not to comment on matters like that.”
    The group, the profits of which in 2011 tumbled after paper production issues with major ­customer the Reserve Bank of India, has begun a shake-up to boost ­profits to more than £100million next year.
    It said it made good progress, achieving efficiency improvements that contributed about £8million to operating profit.
    A new banknote sorter, which can handle up to 2,000 notes a minute, drove a 14 per cent rise in revenue in the cash processing gear arm.
    But lower customer demand led to falling profits and flat revenues at its security product division, which makes holograms for sports tickets and other valuable printed items.
    De La Rue said orders rose 14 per cent to £248million and it was on track to hit annual hopes. Cobbold said: “The face value of cash in ­circulation is growing, particularly in countries where populations and affluence are rising.”
    The shares fell 32½p to 976½p.

    Source: By Philip Waller, http://www.express.co.uk

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  India’s electronic passport project has hit a roadblock as the Amsterdam-based company Gelmalto, selected for supplying chips came under scanner for its alleged role in smart card rollout in Pakistan.

    The Ministry of External Affairs has sought a fresh security clearance from the Ministry of Home Affairs for Gemalto, which was selected to supply chips for the pilot project in 2008. The MNC was reported to be impementing smart card project in Pakistan.

    The Ministry of Home Affairs asked the Department of Economic Affairs under the Ministry of Finance to obtain a self-disclosure report from Gemalto, detailing its businesses in Pakistan. It is also understood to have engaged intelligence agencies to assess if Gemalto’s business in Pakistan could pose a security threat to India in case it is allowed to continue supplying chips for the project.

    Gemalto, however, claimed that the company had never participated in any government project in Pakistan. “We have never had any government projects with Pakistan,” a spokesperson of the company stated in response to queries from Deccan Herald.
    The Gemalto spokesperson said the company did serve governments of over 50 countries with its secure document and e-government solutions.

    Gemalto was known as Axalto before the latter merged with Gemplus on June 2, 2006. Axalto, however, had in August 2005 announced to have supplied high-end EMV (Europay-Mastercard-Visa) chip to Pakistan’s United Bank Limited.

    As the UBL had pioneered EMV rollout in Pakistan, Axalto had provided the bank with a package that included data preparation, cards supply and personalisation solution.

    Gemalto was in September 2008 selected to supply its “Sealys eTravel” solution to India Security Press for the e-passport pilot project, aimed at issuing tamper-proof and secure travel documents to diplomats and officials. The Sealys eTravel package included contact-less communications component of the electronic passports made by the India Security Press. It also included advanced secure operating system and microprocessor that stores and protects the holder’s digital identity as well as the communications antenna.

    The MEA had plans to start issuing e-passports to ordinary citizens in the second phase. But it recently said that the project had to be deferred as it had to seek “fresh security clearance from the MHA in respect of a technically qualified bidder (Gemalto)”.

    Gemalto did not give a specific reply to a query from Deccan Herald on whether the company had submitted the self-disclosure report to the Indian Government. However, in a consolidated response to a set of queries, its spokesperson said the company maintained the policy of customer confidentiality and did not comment on the details of its customers’ operations and processes.

    Notably, in a recent report, the Parliamentary Standing Committee on External Affairs had expressed “concern over the doubtful background” of Gemalto.

    Source: http://www.deccanherald.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  With big government contracts up for grabs, we take a look at six of the vehicles vying for military money.
    In service since 1984, the Humvee isn’t getting any younger. Right now the United States military is in possession of nearly 18,500 of them, all of which are set to be replaced by an as-of-yet-to-be-determined successor in 2015. Enter the suppliers and contractors who are all vying for a piece of the government pie. And who can blame them? With $5 billion being awarded across three winning companies – each liable to receive up to $65 million for preproduction engineering, manufacturing, and development – the race to supply the military with its next Joint Light Tactical Vehicle is underway.
    Of course, whenever government contract money is at stake rest assured there are multiple players in line gunning for it. And with the United States government preparing to dish out billions in contract cash in order to replace the iconic military Humvee, competition is fierce.
    Last month, AM General, makers of the original Humvee, unveiled its Blast-Resistant Vehicle-Off Road (BRV-O) in Detroit, but they aren’t the only ones aiming to win those government greenbacks. Stiff opposition from Oshkosh Defense, Lockheed Martin, and BAE Systems, among others, all of which are vying for one of three contracts on the line.
    Given that these hardcore military machines are truly a sight to behold, here is a quick rundown of the six vehicles battling it out.

    BRV-O:
    Makers of the original Humvee, AM General’s BRV-O is somewhat of a latecomer to the party. Shown for the first time last month in Detroit, the BRV-O features a six-cylinder, 3.2-liter turbocharged engine which is said to churn out 300 horsepower and 500 pound-feet of torque.
    Inside, the BRV-O ‘s crew capsule features energy-absorbing seats, shaped underbody, and modular armor for maximum protection. Of course, added armor can quickly pack on the pounds, reducing overall vehicular mobility. AM General seems to have addressed these issues thanks in large part to an increased payload that provides a margin for added armor, as well as a unique self-leveling suspension aimed at increasing the BRV-O’s tactical maneuverability.

    Eagle:
    A joint effort between General Dynamics Land Systems and AM General, The Eagle may not appear as shiny and bleeding edge as some of its counterparts, but that may just provide it with the advantage it needs to allow the Eagle to soar over the competition. In fact, military buffs will no doubt already be familiar with the Eagle, seeing as how it’s a repurposed version of the Eagle IV, which General Dynamics European Land systems has supplied to the German military since 2008.
    The Eagle isn’t as new, but it is tried and tested; and, perhaps more importantly, it’s relatively cheap at less than $260,000 a pop.

    Lockheed JLTV:
    With utility in mind, the JLVT — a collaborative endeavor consisting of multiple companies including Meritor Defense, L-3 Combat Propulsion Systems, Vehma International of America, with Lockheed Martin at the helm — has been designed from the ground up to be one of more versatile and cost effective entries into the U.S. Army and Marine Corps JLTV competition.
    Already a winning bidder for the first phase of JLTV development, Lockheed was forced into making several modifications to its design by reducing the amount of exotic (read: expensive) materials such as titanium after the Pentagon’s requirements changed for the second phase of the competition.

    Saratoga:
    Launched in October of 2011, Navistar Defense’s Saratoga is yet another entry into the U.S. military’s Joint Light Tactical Vehicle program. Originally designed to target a gap in the light tactical vehicle market, the Saratoga provides a tactical salvo of components aimed at improved mission effectiveness, including metallic or composite add-on armor, and is capable of withstanding arms fire, mine blasts, and IEDs.
    Under the armored hood the Saratoga features a fire-breathing V8 capable of pumping out 340 horsepower and 660 pound-feet of torque.

    Valanx:
    Aside from sporting the coolest name of the bunch, BAE Systems’ Valanx also happens to feature a Ford Power Stroke 6.7-liter turbocharged diesel engine, which BAE indicates gives it a leg up against the competition by providing the best fuel economy, horsepower, and torque of any engine in its class.
    Truck enthusiasts out there will immediately be familiar with the Power Stroke. It’s the same engine Ford uses in its F-Series Super Duty trucks. Previously, the Valanx utilized a Navistar engine in favor of its current mill, but made the switch to the more powerful Ford engine, which is capable of producing an impressive 400 horsepower and 800 pound-feet of torque.
    Other specifics regarding the powertrain remain undisclosed, so we’re not entirely sure whether the engine specs in the Valanx will exactly match up with that of a 2012 F-250 Super Duty.

    L-ATV:
    While the Valanx may score points with its tough-as-nails name and rather futuristic mobile-command-on-wheels design, it is the Oshkosh Defense’s L-ATV that wins us over with its rugged looks and take-no-prisoners attitude.
    Built independently and from the ground up, the Light Combat Tactical All-Terrain Vehicle will make use of Oshkosh’s Tak-4i intelligent suspension system already used in more than 20,000 vehicles. And because fuel economy is a growing concern, Oshkosh offers its ProPulse hybrid diesel-electric drive train.
    According to Oshkosh, the L-ATV features a scalable and advanced crew protection system which can provide dynamic defense capabilities depending on operational and battlefield needs.

    Source: BY AMIR ILIAIFAR, http://www.digitaltrends.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  OGDEN — After being questioned about their use of new license plate recognition technology, the Ogden Police Department put the equipment on display.

    The OPD gave a demonstration to local media Wednesday on how and why they use Automated License Plate Recognition, a new technology that provides continuous and high-speed monitoring of traffic areas.

    Ogden has one ALPR-fitted vehicle, which costs about $50,000 and features four cameras mounted on top of the police car, with a special computer inside. The department has had the vehicle for about one year.

    OPD crime analyst Dave Weloth said the technology can be used in data-mining efforts related to crime scene investigation, criminal travel patterns, hot spots and for other intelligence purposes.

    Weloth said that, among other things, the system can immediately alert officers of wanted individuals, assist in stolen vehicle recovery and assist in Amber alerts.

    Master Officer Tim Shelstead said he has found three stolen vehicles in the past year as a result of having the technology.

    “My job would be greatly hindered without it,” Shelstead said.

    But the Utah Chapter of the American Civil Liberties Union said it is concerned with how information associated with the technology is used, stored and protected.

    In late May, the OPD was one of three Utah law enforcement agencies targeted by the Utah ACLU with records requests seeking information about the technology.

    The ACLU also sent requests to the Utah Highway Patrol and the Iron County Sheriff’s Office.

    A copy of the records request to the OPD shows that the ACLU is seeking information on exactly what type of data is obtained with the technology, who within the OPD can access that data, what procedures those outside of the department must go through to obtain the data and how long data is stored.

    Ogden Police Chief Mike Ashment said he understands the ACLU’s concern about the possible misuse of citizen information, but proper safeguards are in place to make sure that doesn’t happen.

    “We implement the same policies we do with everything else,” he said. “This is no different than any other tool we use that involves information on people or their vehicle.”

    Ashment said the technology fits in with the department’s overall approach of using technology to be more effective and efficient in solving crimes.

    “We are tasked with ensuring the safety of the community,” he said. “This is another tool to help us do our jobs better and more efficiently.”

    Source: By Mitch Shaw, http://www.standard.net

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Iowa City parking officers may soon hear an alarm if they pass vehicles parked illegally or harboring unpaid tickets using an expensive technology that’s the envy of many law enforcement officials.

    The city’s Transportation Services Department is looking for vendors and has set aside $154,000 in its budget for a License Plate Recognition system, which works by mounting a high-definition camera on top of a vehicle that takes photos of license plates and runs them through a scofflaw database. Such software still is rare in Iowa but is picking up steam as it becomes more affordable and accessible.

    The idea is to make parking enforcement more efficient, said Mark Rummel, associate director of Transportation Services. Rather than checking each vehicle in a parking lot or row of meters individually, the software would automatically scan nearby vehicles and sound an alarm if it detects a violation.

    I think just the time it’s going to save us is going to be huge,” he said. “It’s a pretty vast area that we try and cover.”

    Police departments in Iowa, including Des Moines and Cedar Rapids, have looked into such software, but most say it’s too expensive.

    “We couldn’t afford it right now,” said Sgt. Cristy Hamblin, spokeswoman for the Cedar Rapids Police Department.

    Officials with the Iowa City Police Department didn’t return calls for comment, but Assistant to the City Manager Geoff Fruin said LPR technology hasn’t been discussed for the ICPD.

    Johnson County Sheriff Lonny Pulkrabek said LPR would be ideal for recovering stolen vehicles or catching barred drivers, but it ultimately is too expensive to be worth it.

    “As you’re going through downtown Lone Tree, to be running every license plate you go by, I could see where that could be useful,” he said.

    Private vendors must submit their proposals to the city by July 12, and the City Council will need to approve the contract. Rummel said he hopes to have the software up and running by late fall at the earliest. It would be installed in one of the department’s Ford Connects but could be put in more in the future, he said.

    The Transportation Services Department only has access to parking violations, permits and meter records, Rummel said, so the software wouldn’t be able to tell whether a vehicle is stolen or whether there’s a warrant for the owner’s arrest, at least not without access to those databases. It would detect whether vehicles have more than $50 in citations that are more than 10 days old, he said.

    University of Iowa Parking and Transportation Director Dave Ricketts said that depending on the cost, his department would be interested in using the software as well.

    “We’ve got 16,000 parking spaces,” he said. “Yes, it would help.”

    LPR technology has become much more reliable and less expensive over the past 10 years, Ricketts said.

    “LPR is definitely going to be in our future,” he said. “How we use it is unclear yet, whether it’s enforcement, cashiering or security, but we’re headed that way.”

    The Polk County Sheriff’s Department installed an LPR system in one of its patrol cars last summer that can check for things such as arrest warrants, stolen vehicles and missing persons, Sgt. Jana Rooker said. The department received a nearly $26,000 Department of Justice grant to pay for the software.

    Rather than having the officer type license plate numbers into their computers while driving, the software automatically scans plates and sounds an alarm if it detects a warrant or violation, she said.

    “So as the officer is driving down the road, almost every vehicle it encounters on the road, that license plate can be checked within a matter of seconds with this software,” Rooker said.

    But not everyone is excited at the sound of that.

    Ben Stone, executive director of the American Civil Liberties Union of Iowa, said he’s concerned about the government’s ability to store the data it collects through LPR software. Steps must be taken now while LPR use is in its early stages to ensure data that’s collected is destroyed, Stone said.

    “As databases become interconnected and synced, more and more and more of this kind of surveillance technology can create the ability of the government to instantly create a dossier, a profile of what people are doing,” he said.

    Source: By Tara Bannow, http://www.press-citizen.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Infineon Technologies announced it is supplying the security chips for Malaysia’s new national electronic identity cards. Known as MyKad, the smart card features Infineon’s SLE 78 security controller with Integrity Guard security technology, combined with SOLID FLASH for fast deployment capability. ??

    MyKad is a multi-application national electronic identity card, including biometric identification, which will enable the implementation of additional functions such as driver license, health, ATM, e-signature and eGovernment services. In the past years, Malaysia issued approximately 2 million new identity cards each year.

    Identity cards are used for many years and are subject to intense wear. This is why they must meet specific high requirements. In particular, the bearer’s personal data should be secured during the entire life of the card. ??

    ?The Infineon SOLID FLASH product provides flexibility by using non-volatile memory technologies. The security certified flash product enables a faster reaction to market changes through short lead times and flexible product usage and offers advantages in logistics, development and throughout the certification process.

    A full range of SOLID FLASH products are Common Criteria certified by the Federal Office for Security in Information Technology in Germany as well as type approved by EMVCo making it the choice for many applications while keeping flexibility for upcoming changes. ??

    MyKad also uses Infineon’s Integrity Guard security technology. For identification documents with high demands on security, it offers long lasting security with encrypted Dual CPU-core. With this technology, data is encrypted along the entire data path during processing. The security controller core has two processing units, constantly checking each other’s correct function by utilizing error detection.

    Infineon’s SLE 78 product family with Integrity Guard is used in eGovernment applications, such as the electronic health card, the electronic identification card and in residence permits with biometric data

    Source: http://www.secureidnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  May sound strange nevertheless true. The armoured car business is booming in the drug-hit Mexico, which, after Sunday election, voted back to power the Institutional Revolutionary Party after 12 years. This party had the unique history of ruling Mexico for over 70 long years between 1929 and 2000.

    The purchase of armoured car has been necessitated by the fact that the country has lost 55,000 people in the last six years in drug-related violence.

    To keep themselves safe (from various drug cartels) while travelling many people are opting to buy armoured cars. They consider their vehicles as safe havens.

    Media reports from Mexico suggests that the sale of armoured cars in the last four years have increased by 1000 per cent.

    A middle-size SUV outfitted with armour is bullet-resistant and can withstand 15 to 20 rounds of bullets fired from a handgun. They are also called “family tanks” and became a top issue in the recently held election.

    Enrique Pena Nieto, who finally won the presidential election, had said during the campaign that he wants to focus on curbing violence in the streets and less on catching drug cartel leaders and blocking the flow of drugs into the United States. The US wants most of the Latin American countries, where the drug mafia rules the roost, to intensify their battle against the drug mafia.

    Countries like Peru in South America, which saw decline in the drug cartel, has witnessed their re-emergence recently.

    President-elect 45-year old Enrique Pena Nieto had promised to reinvigorate the economy and reduce rampant drug violence. He will take office in December for a six-year term and thus will restore the party that dominated Mexican politics for most of the past century, at times ruthlessly.

    But against he general prediction of a big victory he ended up only 5.4 percentage points ahead of his leftist rival, Andres Manuel Lopez Obrador.

    Pena Nieto got 37.6 percent support compared to 32.2 percent for Lopez Obrador and 25.4 percent for ruling party candidate Josefina Vazquez Mota.

    The ruling National Action Party (PAN) suffered a crushing defeat as it failed to curb the fierce violence of a drug war that has killed 55,000 people and battered Mexico’s image.

    Having run Mexico as a virtual one-party state for most of the 20th century, the PRI was ousted in an election 12 years ago. It finished third place in the 2006 presidential election.

    But Pena Nieto, a former governor of the state of Mexico (2005-11), restored the party’s pride.

    Not only has he promised to lift economic growth to about six percent a year and create jobs but also draw the heat out of a drug war that has killed more than 55,000 people since late 2006. His main reform proposals include allowing more private investment in Mexico’s state-run oil industry.

    Source: http://nvonews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Xtek has announced that it has completed construction of its first large scale XTclave body armour production plant.

    According to the company the new plant is capable of manufacturing more than 1000 high tech body armour plates per day, and will enable the Australian company to supply defence and law enforcement agencies around the world.

    The company has spent the last five years working towards construction of its commercial scale manufacturing plant, after building its initial small prototype plant in 2008.

    XTek says "the ability of this technology to consistently produce advanced technical composites, such as precision, void free, structural carbon fibre reinforced laminates, capable of withstanding extreme thermal loading is significant.

    "It is believed that this could have considerable utility in areas such as aerospace and aviation industries, in which small numbers of high value products are routinely manufactured according to exacting standards."

    Source: http://www.myfen.com.au

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  BANGALORE: From July, including the first Sunday, the regional passport office (RPO), in Bangalore will accept passport application manually at its office in Koramangala.

    "Beginning with the Passport Mela scheduled on June 30 and July 1, the applicants for passport can directly approach the counters at RPO and the passports issued at RPO will have all security precautions, though the applications are accepted manually," said a spokesperson of Ministry of External Affairs ( MEA).

    Biometrics: The ministry will commence incorporating the biometrics as required in countries abroad from 2013. "The passports with biometrics will be introduced from next year and the ministry is trying to install required technical back up by then. For the present the passports will not have bio-metrics as per international standards," the spokesperson said.

    The ministry also held discussions with the employees representatives of RPOs across the country and has reached for an understanding to re-schedule of working hours in view of seven day working day for RPOs to overcome the large quantity of pending applications before the various RPOs.

    "We have convinced the employees of RPOs about the fatigue factor they had to face because of the long working hours, that include the week-end holidays. Once we stabilize the pending numbers of passport applications through the exercise we will revert back to five-days a week schedule. We hope that the pending applications can be cleared by July 7 and July 8, the last two days for Passport Mela," the he said.

    Source: http://articles.timesofindia.indiatimes.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  HID Global says it has shipped more than 150 million high-technology eID solutions to governments for citizen IDs around the world.
    The firm has marked this milestone at a ceremony in Ireland, where it has a high-security eID credential facility producing products for access and identification-related applications such as ePassports and contactless swipe ID/access cards.
    “We are proud to be a key provider of secure contactless technology to governments for eIDs worldwide,” says Anthony Ball, senior vice president, Identity and Access Management (IAM), HID Global. “More than 150 million people worldwide, almost a third of all citizens using high-security ePassports and identity credentials, carry our technology with them. We are exporting technology and know-how to every continent, and our local workforce and the entire community can be very proud of this milestone, as well as our contribution to a critical aspect of the world’s security.”
    HID Global says it has shipped more than 100 million components used in ePassports in 30 countries, which comprises approximately 28% of the world’s market. According to the International Civil Aviation Organization (ICAO), as of December 2011, a total of 355 million ePassports had been issued globally. The vast majority of EU countries, as well as numerous states outside of Europe, are now issuing machine-readable ePassports. The company has also shipped more than 50 million microchip-based inlays used in eIDs in 22 countries. Other notable achievements include providing tens of millions of units for a variety of European ePassports.
    Set up 15 years ago, the Ireland facility was acquired in 2007 by HID Global. According to the company, it has expanded the operation and made it into one of the country’s most advanced secure technology facilities to accommodate the growing global trend toward eIDs and ePassports. Now one of Connemara Gaeltacht’s largest employers, the operation is dedicated to eGovernment product research, development and manufacturing, and includes a world competence centre for HID Global’s high technology RFID-enabled components.
    “HID Global is at the centre of an important global trend,” says Craig Sandness, vice president of sales at the firm’s Government ID Solutions division. “Governments worldwide are shifting to eIDs to dramatically improve the security, privacy, convenience and confident authentication needed in border and access control, and other important identification-related applications such as national IDs, driving licences, electronic voting and health care. As a leading high-security ePassport and eID component producer, we are able to provide the complete assembly of these critical components from one source.”

    Source: http://www.securitydocumentworld.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The International Armoring Corporation (IAC) was founded by Mark Burton in Ogden, Utah, in 1993. He initially planned to manufacture 24 vehicles, but ended up with more than 225 in the first year in business. Since then more than 8,000 vehicles have rolled out of the IAC facilities. Although at the beginning the company provided heavy-duty armored vehicles only for security companies and military contractors, the emergence of the civilian armored-vehicle market made IAC focus on conventional vehicles too.
    IAC offers a lightweight, flexible, bullet-resistant material, which is a blend of synthetic fiber laminates called Armormax, which weighs only 3.9 pounds per square foot. For $65,000 to $85,000 IAC can transform any car into an armor-plated automotive fantasy. The most popular choices are large luxury sedans and suburban-type SUVs, but IAC has also transformed smaller cars such as Toyota Camrys, Maybachs and Aston Martins.
    Burton estimates that around 20% of his customers seek protected transportation to mitigate a known threat or have been targeted for attack in the past, and around 50% just seek an insurance against random acts of violence, such as carjackings.

    Source: http://www.inautonews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  William Whyte once boasted in an interview with a Toronto newspaper that his armour-plated vehicles were “pretty awesome machines” and that his customers included a good friend of Arnold Schwarzenegger.

    But when the Canadian man entered into a multi-million-dollar contract to supply the U.S. Defense Department with 32 armoured gun trucks to protect VIPs in Iraq, he only delivered seven — and none of them met the bullet- and blast-protecting requirements, according to a federal grand jury indictment handed down this week in Virginia.

    Federal prosecutors announced late Thursday that Whyte, 67, president of Ontario-based Armet Armored Vehicles, and his company have been charged with three counts of major fraud against the United States, seven counts of wire fraud and three counts of false, fictitious and fraudulent claims.

    The charges have not been proven in court and in a statement emailed to Postmedia News, Whyte, who is not in custody, said he was “shocked at the allegations against me, which I totally deny.” He also said he was prepared to meet with U.S. prosecutors.

    John Lichtenstein, Whyte’s lawyer in Roanoke, Va., said Friday there was nothing he could say about the case.

    Armet, based in King City, Ont., has been armouring vehicles for more than 30 years and has manufacturing sites in Bradford, Ont., Danville, Va., and Tangiers, Morocco, according to a detailed company profile on Industry Canada’s website, which was updated in late 2011.

    The company has an “impeccable worldwide standing” and counts as its clients heads of state, diplomats, government agencies, multinational corporations, police forces and “discriminating individuals worldwide,” the profile states. Its government clients include departments in Canada, the U.S., United Arab Emirates, Europe and Russia.

    Officials with Public Works and Government Services Canada said Friday they were searching to see what, if any, contracts the government may have had with Armet.

    According to the indictment, the U.S. Joint Contracting Command in Baghdad awarded Armet a $4.7 million contract in April 2006 for 24 armoured gun trucks.

    A few months later, a $1.5 million contract was awarded to Armet to build eight more trucks.

    The vehicles were to be used to transport Iraqi VIPs through “hostile and dangerous” environments.

    According to the indictment, the first 24 vehicles were to be delivered by July 31, 2006, but Armet failed to meet the deadline.

    By October 2006, only four trucks had been delivered.

    The following month, Armet, citing cash-flow problems, sought an advance payment of $1 million, the indictment says. The U.S. military agreed to pay the company $824,531.

    But instead of using that money to build more trucks, the money was diverted for “other business and personal expenditures,” the indictment alleges.

    By early 2008, the company had delivered a total of seven vehicles, six of which were accepted by the U.S. military.

    There were other problems.

    The contracts required that the vehicles be bulletproof and that their undercarriages be able to withstand explosions. Armet had promised that the floors of the vehicles could withstand various assaults, including blasts from two U.S. M67 anti-personnel grenades.

    But none of the trucks delivered met the required specifications, according to the indictment.

    The vehicles were also supposed to be equipped with special tires that could withstand punctures. The first five vehicles did not have such tires.

    “(The defendants) knew that all of the armoured gun trucks they had provided were defective and would not protect the officials that they were intended to protect,” the indictment states.

    The U.S. military ended its contracts with Armet in March 2008.

    On Friday, Armet’s website, www.aavi.com, redirected visitors to the website of another company, Terradyne Armored Vehicles, based in Newmarket, Ont.

    In an emailed statement, Terradyne president Durward Smith said: “I can tell you that we have no affiliation with Armet nor its owner. A vehicle design was purchased from them with a temporary redirect of the website to capture any potential business as our understanding is that Armet is no longer making armoured vehicles.”

    Whyte, an ex-York Regional Police officer, has a connection to an infamous heist at an armoured car company 20 years ago.

    In November 1992, armed and masked robbers targeted National Armored Ltd. in Concord, Ont., and made off with more than $8 million in cash and cheques from a vault.

    Whyte managed the armoured carrier company at the time.

    Source: By Douglas Quan, http://o.canada.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  JD Leipold of U.S. Army public affairs has this article on female body armour:

    Today, both male and female Soldiers wear body armor that has been designed for men. But the Army plans to field to women next summer a new type of body armor, designed for them, that will be shorter in the torso with more customized adjustments specific to the female form.

    Until that happens, the 14 percent of the Army who are women will continue to wear one of the 11 sizes of the Improved Outer Tactical Vest, or IOTV, that are worn by their male counterparts.

    Following anthropomorphic sizing and fitting studies overseas, and also at Fort Bragg, N.C., West Point, N.Y., and Fort Campbell, Ky., between 2009 and 2011, Program Executive Office, or PEO, Soldier started developing female body armor prototypes that addressed the physical differences between the sexes.

    Lt. Col. Frank J. Lozano, the product manager for Soldier Protective Equipment, said one thing his shop realized quickly from the studies was that women generally have narrower shoulders than males. The shoulder area on the new IOTV design was brought in closer to the neck by adding more fabric and opening the area around the armpits.

    The change translates to increased range of motion in the shoulders and upper arms and also allows weapons to be seated in the shoulder weld. The extra material and adjustment straps also allows darting to be incorporated much as it is on a woman’s blouse which will give a more secure and customized fit.

    “Most females tend to have a narrow or thinner waist as it relates to the chest area, so we pulled the waist area in,” Lozano said, adding that it’s not always a one-to-one relationship. “Some women will want more room in the waist area so we allowed for adjustability in the cummerbund in the back which can be pulled in tighter or let out more than on the standard IOTV.”

    PEO Soldier also realized through its multiple studies that the typical torso length for women was for the most part shorter than that of men. The female IOTV will be shorter at the bottom. Lozano said the new design will keep the IOTV from rubbing on the hips, which can cause chafing while walking.

    Female Soldiers had also advised PEO Soldier that the standard IOTV, with its longer torso, causes the front armor plate to press into their thighs when they are seated. This cuts off blood flow to their legs. The female version of the IOTV, with its shortened torso, will address this issue. Additionally, a new exterior plate pocket will allow the armor plate to be inserted from the side in a more diagonal fashion.

    Though not part of the female version of the IOTV design, the Army is also looking for ways to develop armor plating that better conforms to the human body.

    “The challenge right now is that when you bring in those complex curvatures, the plate loses some of its strength,” Lozano said. “We’re working with some armor manufacturers to invest in a manufacturing capability that finds the right chemistry to develop the soft and hard armor necessary to have a complex curved plate at a light weight that still defeats the threats.”

    Developments in protective plate design will make ballistic protection more comfortable and form-fitting for both female and male Soldiers, but that’s a way off.

    Lozano said in the September-October timeframe PEO Soldier will begin fielding 100 prototypes to female engagement teams from the 101st Airborne Division to evaluate.

    “There are 30 females who we’ll provide with spares and repair parts,” he said. “We’ll hold some in reserve in case other females get added to the teams. They’ll do user evaluations, then provide feedback to us that we’ll wrap into the final iteration of the design and look to field to a brigade combat team by next summer.”

    Source: http://blogs.ottawacitizen.com
  •  KATHMANDU: The government is planning to introduce the smart card concept in the transport sector after a gap of two years. The Department of Transport Management has decided to introduce smart cards for driving licences and bill books from the current fiscal year.

    The department will call a global tender for the smart card soon, said director general of the department Chandraman Shrestha. “We have regenerated the concept following a directive from the Ministry of Physical Planning, Works and Transport Management,” he said. The ministry has decided to introduce smart cards in mid-July to reform the transport sector.

    Earlier, in 2010, minister for labour and transport management Mohamed Aftab Alam had tried to introduce smart cards for licences and bill books. However, the process was halted after the Commission for the Investigation of Abuse of Authority suspected irregularities in the process.

    Minister Aftab had formed a committee in the ministry to carry out the bidding process breaching the area of the department. According to law, the department should have started the bidding process. The commission found discrepancies in the process.

    According to Shrestha, the tender process will start in three months and implementation of the smart cards will begin at the end of the current fiscal year. “We are serious about implementing it,” he said, adding that smart cards can be effective in controlling the use of fake driving licences and bill books.

    The Asian Development Bank is providing financial support for the initiative.

    Similarly, the department is also planning to introduce embossed number plates for vehicles. The introduction of embossed number plates will help control criminal activities. “Embossed number plates can’t be changed easily, so it will reduce the use of vehicles in crimes,” he said.

    Former director general of the department Saradchandra Paudel had envisioned the concept three years back. “We have been conducting a feasibility study,” he said, adding it will be implemented this year once the study shows a positive result. Tender will be called soon, he added.

    Nearly 1.4 million vehicles are registered in the country including more than 850,000 motorcycles. The policy will affect vehicles plying across the country. The department is planning to implement the smart card from Bagmati zone where about 50 per cent vehicles are registered.

    Meanwhile, the department has completed building digital record of driving licences and bill books in all its 14 zonal offices. The process was started about a decade back. Similarly, the department has introduced e-billing system for collecting transport revenue — licence or vehicle registration and for renewing them.

    Source: http://www.thehimalayantimes.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  ALEXANDRIA, VA.—Prosecutors indicted a South Korean company and five of its employees on Thursday for stealing the recipe for making Kevlar body armour from the DuPont Co.

    The indictment in U.S. District Court in Alexandria alleges that Kolon Industries engaged in a seven-year conspiracy to steal secrets on the manufacturing process for Kevlar and a similar product called Twaron produced by a large Japanese chemical company, Teijin Limited.

    Kolon would hire current and former DuPont employees as “consultants” who would provide confidential information about Kevlar, including its polymerization process and details of the manufacturing process, according to the indictment. Kevlar is made at a factory in Richmond.

    Kolon used those secrets to improve its process for making Heracron, a product that competes with Kevlar, according to the indictment.

    Several longtime DuPont employees are identified as unindicted co-conspirators in the indictment who received payments of up to $143,000 (U.S.) to engage in the scheme, according to court records. One of the former employees, Michael Mitchell, has already been sentenced to 18 months in prison for his role in the scheme.

    Last year in Richmond, a civil jury awarded DuPont a $920 million (U.S.) judgment against Kolon, which is appealing the verdict and also fighting an injunction that would bar it from selling Heracron in the U.S. for 20 years.

    Source: http://www.thestar.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The Imprimerie Nationale, the official supplier and printer to the French government, has chosen Datacard Group to provide systems for France’s e-passport program.

    Datacard will install Datacard PB6500 passport issuance systems. These automated, inline high-volume passport production systems will be able to issue up to 25,000 passports a day.

    The system’s configuration includes automated leafing, inline inkjet printing, smart card encoding, laser perforation and enhanced lamination of secure thin-film overlays. The system’s universal interface comes through Datacard’s Syntera customization suite software to act as a bridge to link the PB6500 passport systems.

    With the system Imprimerie Nationale has been able to cut passport delivery time from six days to two.

    Source: http://www.contactlessnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The ePassport is the culmination of a sustained process of development of technical specifications for machine readable travel documents (MRTD). It introduces a new dimension to aviation security in that, within the conventional machine readable passport with its machine readable zone, an additional layer of verification of information contained in an electronic chip is placed, which verifies the information in the passport’s machine readable zone by the use of a special reader. Much research has gone into the areas of the technology and verification in the development of the ePassport.

    ver 104 States are currently producing and using ePassports and there are approximately 400 million in circulation. This accounts for 33per cent of all passports used globally. The additional feature that the ePassport carries in the conventional machine readable passport is a chip containing biometric and biographic information which have to be validated accurately, efficiently and quickly while retaining the security and integrity of the information. Ideally, an ePassport should be issued in accordance with the technical specifications approved by the International Civil Aviation Organization (ICAO) . However, this does not happen in all cases of issuance of ePassports. This lapse could seriously compromise global security. The nuances of this threat are described and discussed in this article against their legal background.

    At a recent Symposium on machine readable travel documents, biometrics and security standards.held at ICAO on 10 to 12 October 2012, experts addressed ICAO machine readable travel documents (MRTD) standards and specifications, identity management best practices and related border security issues. Sri Lanka, an issuer of machine readable passports, was represented at this Symposium. Foremost among these discussions was the ePassport, which is defined by ICAO as a passport which has a contactless integrated circuit (IC) chip within which is stored data from the machine readable passport page, a biometric measure of the passport and a security object to protect the public key infrastructure (PKI) cryptographic technology, and which conforms to the specifications of Doc 9303 part 1 . The ICAO Facilitation Manual defines the ePassport as a machine readable passport that has a contactless integrated circuit embedded in it and the capability of being used for biometric identification of the machine readable passport holder in accordance with the Standards specified in the relevant part of ICAO document 9303 (Machine Readable Travel Documents) . ePassports are easily recognised by the international ePassport symbol on the front cover .

    Biometric Identification

    It is important to note that the operative terms in the definition of the ePassport are “biometric identification” and “public key infrastructure (PKI) cryptographic technology”. Biometric technology involves a measurable, physical characteristic or personal behavioral trait used to recognize the identity, or verify the claimed identity of a person. Biometric identification has been defined as “a generic term used to describe automated means of recognizing a living person through the measurement of distinguishing physiological or behavioural traits” .

    Biometrics target the distinguishing physiological or behavioral traits of the individual by measuring them and placing them in an automated repository such as machine encoded representations created by computer software algorithms that could make comparisons with the actual features. Physiological biometrics that have been found to successfully accommodate this scientific process are facial recognition, fingerprinting and iris-recognition which have been selected by ICAO as being the most appropriate. The biometric identification process is fourfold: firstly involving the capture or acquisition of the biometric sample; secondly extracting or converting the raw biometric sample obtained into an intermediate form; and thirdly creating templates of the intermediate data is converted into a template for storage; and finally the comparison stage where the information offered by the travel document with that which is stored in the reference template.

    Biometric identification gets into gear each time an MRTD holder (traveler) enters or exists the territory of a State and when the State verifies his identity against the images or templates created at the time his travel document was issued. This measure not only ensures that the holder of the document is the legitimate claimant to that document and to whom it was issued, but also enhances the efficacy of any advance passenger information (API) system used by the State to pre-determine the arrivals to its territory. Furthermore, matching biometric data presented in the form of the traveler with the data contained in the template accurately ascertains as to whether the travel document has been tampered with or not. A three way check, which matches the traveler’s biometrics with those stored in the template carried in the document and a central database, is an even more efficacious way of determining the genuineness of a travel document. The final and most efficient biometric check is when a four way determine is effected, were the digitized photograph is visually matched (non electronically) with the three way check described above . In this context, it is always recommended that the traveler’s facial image (conventional photograph) should be incorporated in the travel document along with the biometric templates in order to ensure that his identity could be verified at locations where there is no direct access to a central database or where the biometric identification process has not entered into the legal process of that location.

    Public Key Infrastructure (PKI) Cryptographic Technology

    PKI Cryptographic technology uses a brand new technique known as quantum cryptography, designed to eliminate the terrifying vulnerabilities that arise in the way digitally stored data are exposed to fraudulent use. This new technique uses polarized photons instead of electronic signals to transmit information along cables. Photons are tiny particles of light that are so sensitive that when intercepted, they immediately become corrupted. This renders the message unintelligible and alerts both the sender and recipient to the fraudulent or spying attempt. The public key directory - designed and proposed to be used by customs and immigration authorities who check biometric details in an electronic passport, is based on cryptography - and is already a viable tool being actively considered by the aviation community as a fail-safe method for ensuring the accuracy and integrity of passport information.

    In order to assure inspecting authorities (receiving States) that they would know when the authenticity and integrity of the biometric data stored in the MRTD, which they inspect, are compromised and tampered with, the Public Key Infrastructure (PKI) scheme was developed by the TAG/MRTD, which has been pioneering work on the MRTD for over a decade . The scheme is not calculated to prescribe global implementation of public key encryption, but rather acts as a facilitator enabling States to make choices in areas such as active or passive authentication, anti-skimming and access control and automated border crossing, among other facilitative methods. The establishment of a public key directory, through means of public key cryptology and in a PKI environment, is consistent with ICAO’s ultimate aim and vision for the application of biometric technology on the fundamental postulate that there must be a primary interoperable form of biometric technology for use at border control with facilities for verification, as well as by carriers and the issuers of documents. This initial premise is inevitably followed by the assumption that biometric technologies used by document issuers must have certain specifications, particularly for purposes of identification, verification and the creation of watch lists. It is also ICAO’s vision that States, to the extent possible, are protected against changing infrastructure and changing suppliers, and that a technology, once put in place, must be operable or at least retrievable for a period of ten years.

    The ePassport

    The story of the passport- the precursor of the ePassport – starts with the birth of an individual and his birth certificate, which records the event of birth and time and place thereof. The Civil Registry is able, with this document to primarily establish the identity of the person at birth and inform his country of his details for purposes of maintaining census and vital statistics. The passport, which uses this information, gives a person a name and natonality that is required for him to travel internationally. The passport is a basic document in the transport by air of persons. Its use therefore is of fundamental importance as a travel document, not only because it reflects the importance of the sovereignty of a State and the nationality of its citizens but also because it stands for the inviolability of relations between States that are linked through air transport.

    The key consideration of an ePassport is Global Interoperability — the crucial need to specify a system for biometrics deployment that is universally interoperable. a Logical Data Structure (LDS) for ePassports required for global interoperability. It defines the specifications for the standardized organization of data recorded to a contactless integrated circuit capacity expansion technology of an MRP when selected by an issuing State or organization so that the data is accessible by receiving States. This requires the identification of all mandatory and optional Data Elements and a prescriptive ordering and/or grouping of Data Elements that must be followed to achieve global interoperability for reading of details (Data Elements) recorded in the capacity expansion technology optionally included on an MRP (ePassport). The other considerations are Uniformity — the need to minimize via specific standard setting, to the extent practical, the different solution variations that may potentially be deployed by member States; Technical reliability — the need to provide guidelines and parameters to ensure member States deploy technologies that have been proven to provide a high level of confidence from an identity confirmation viewpoint; and that States reading data encoded by other States can be sure that the data supplied to them is of sufficient quality and integrity to enable accurate verification in their own systems; Practicality — the need to ensure that specifications can be operationalized and implemented by States without their having to introduce a plethora of disparate systems and equipment to ensure they meet all possible variations and interpretations of the standards; and Durability — the requirement that the systems introduced will last the maximum 10-year life of a travel document, and that future updates will be backward compatible.

    The major components of a biometric system are: Capture — acquisition of a raw biometric sample; Extract — conversion of the raw biometric sample data to an intermediate form; Create template — conversion of the intermediate data into a template for storage; and Compare — comparison with the information in a stored reference template.

    In terms of security and privacy of the stored data, both the issuing and any receiving States need to be satisfied that the data stored on the IC has not been altered since it was recorded at the time of issue of the document. In addition, the privacy laws or practice of the issuing State may require that the data cannot be accessed except by an authorized person or organization. Accordingly ICAO has developed specifications in Section IV regarding the application and usage of modern encryption techniques, particularly interoperable public key infrastructure (PKI) schemes, to be used by States with their machine readable travel documents as made in accordance with the specifications set out in Doc 9303. The intent is primarily to augment security through automated means of authentication of MRPs and their legitimate holders internationally. In addition, ways and means are recommended to implement international ePassport authentication and to provide a path to the use of ePassports to facilitate biometric or e-commerce applications.

    Conclusion

    The foremost necessity is to establish a strong security culture in every State. For this, there must be a clear definition of State responsibility and accountability brought to bear by a close and unbreakable link between government and industry stakeholders. A security culture would make States aware of their rights and duties, and, more importantly, enable States to assert them. Those who belong to a security culture also know which conduct would compromise security and they are quick to educate and caution those who, out of ignorance, forgetfulness, or personal weakness, partake in insecure conduct. An ePassport must necessarily be the result of efficient and fail-safe organizational arrangements. It should be tested at border control by trained professionals.

    eGovernment and eID are the bare essentials for State security. The digital economy has also brought much facilitation that helps the world move to paperless processes which result in greater economy and streamlined processes. However, there must essentially be global harmonization in this process. In this regard ICAO has made remarkable progress in advancing its MRTD programme to the level it is at now. If harmonization means ensuring consistency between global practices, standardization means compliance with international Standards. There is no room for doubt that both harmonization and globalization are needed in this context.

    Source: by Dr. Ruwantissa Abeyratne, http://www.srilankaguardian.org

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The Conservative government’s fervour for Canadian history will play out on the pages of your new passport, soon to be unveiled after nine years of delays and cost overruns.

    After a multimillion-dollar advertising campaign for the War of 1812 and the announcement that they plan to rename the Canadian Museum of Civilization in Ottawa as the Canadian Museum of History, the Tories are set to unveil new designs for Canada’s electronic passport that focus on key historical moments, HuffPost has learned.

    Bureaucrats at first recommended the government adopt images of fauna and flora to grace the inside pages of the new travel document, similar to the United Kingdom’s passport. The Conservatives chose instead to follow the example of the U.S. passport, which features images of the Declaration of Independence and Mount Rushmore, and focus on history.

    “It will be something that Canadians can be proud to carry,” said Rick Roth, a spokesman for Foreign Affairs Minister John Baird. Roth refused to elaborate on the design sketches that will be part of the new electronic passport, which will be issued for five- and 10-year time periods.


    What would you like to see in the passport design? Share your comments
    The implementation of Canada’s ePassport, which includes an electronic chip with facial recognition information, has been delayed for nine years. A pilot program for diplomats and public office holders was planned for 2005 but did not get under way until 2009. The national roll-out was put on the back burner until the 2008 budget announced ePassports would be ready in 2011. Then it was 2012. Now, they should be ready in 2013.
    Canada is the last G7 country to implement the international standards established by the International Civil Aviation Organization (ICAO) in 2003. All of Canada’s key allies and more than 95 countries, including Pakistan, Sudan and Tajikistan, have pushed ahead with the technology.

    Source: By Althia.Raj, http://www.huffingtonpost.ca

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Zimbabwe is exploring the implementation of ePassports before the end of the year, according to the country’s Home Affairs co-minister Theresa Makone.
    ePassports, also known as “biometric passports” contain an electronic chip that is encoded with surname, given name, date of birth, place of birth and gender information. It also includes a digital picture of the bearer’s face. Signatures are not reproduced on the chip.
    The Zimbabwe government believes that the introduction and mass production of the new travel document will reduce the price of the document. Currently, an ordinary Zimbabwean passport costs US$50 while other regional countries charge less than US$30.
    Makone said that a new digitalized document would curb counterfeit documents and would also allow the country to match the rapidly adopted international ePassport standard.
    The deployment of the ePassport also coincides with the Foreign Ministry’s new digitalized passport application processes, which allow residents to obtain passport applications online.
    Despite the online availability of ePassport applications, applicants will still need to go to the passport office to complete their applications in person, and will also require a national ID card in order to submit their application.

    Source: By Stephen Mayhew, http://www.biometricupdate.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  
    Trüb has signed a new agreement to continue to provide electronic and secure polycarbonate data pages for Republic of Lithuania ePassports.
    According to the firm, the electronic data page is attached to the ePassport booklet through a patented and robust page binding element, and is designed for a lifespan of 10 years. Issuance of passports with an electronic polycarbonate data page started in January 2008. The chip stores personal data, a facial image and two fingerprints of the document holder.
    The latest contract builds upon a 2008 agreement which engaged Trüb to supply highly secure polycarbonate data pages with embedded chip to the Lithuanian Personalisation Center of Identity Documents.
    The data pages are integrated into the Lithuanian passport booklets by UAB Garsu Pasaulis and then personalized by the Personalisation Center of Identy Documents, which is part of the country’s Ministry of Internal Affairs.
    “It is widely recognised that the Lithuanian biometric passports are a valuable indicator of the country’s distinctive attitude to security-oriented innovation,” said a Ministry of Internal Affairs official.
    ePassports, also known as “biometric passports” contain an electronic chip that is encoded with surname, given name, date of birth, place of birth and gender information. It also includes a digital picture of the bearer’s face. Signatures are not reproduced on the chip.

    Source: By Stephen Mayhew, http://www.biometricupdate.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Morpho has won another international call for tenders from the Finnish National Police Board to supply the country’s new ePassports, as part of a consortium including Oberthur Technologies. The consortium has been providing Finland with secure ePassports since 2006.
    Within the consortium Morpho provides the passport booklet which includes a set of new and improved security features on its polycarbonate data page. The data page also contains an integrated microchip which stores the holder’s personal details and biometric data (fingerprints and facial image). Morpho also supplies its ICAO PKI system and its personalization solution.
    With enhanced physical and electronic security features, Finland’s new passport will provide greater protection against identity theft and fraud, and enable fast, secure identification of passport holders.
    Finland began issuing its new ePassports at the end of August 2012.

    Source: http://www.planetbiometrics.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Cash-strapped New York has tentatively chosen the highest bidder to produce driver’s licenses under a disputed contract that would provide only black-and-white photos and end up costing the state nearly $38 million more than the current contract if it’s approved.

    According to court papers reviewed by The Associated Press, the losing vendors, including the company that has produced New York licenses with color photos for 16 years, are protesting the $88.5 million award to a Canadian company.

    The award to CBN Secure Technology Inc. of Ottawa is also being reviewed by the state comptroller.

    CBN is part of the Canadian Bank Note company that prints Canadian money, passports and driver’s licenses worldwide. Company officials did not respond to repeated requests for comment.

    The DMV tentatively awarded the contract to the high bidder 10 months after New York advised the current vendor, De La Rue North America Inc., that because of “significant budgetary constraints” the state would have to reduce the cost of the contract, according to the court filings. As a result, De La Rue submitted a bid 10 percent lower for the new, eight-year contract, which ended up being nearly $38 million less than CBN’s bid.

    De La Rue, based in England, and Massachusetts-based MorphoTrustUSA, another unsuccessful bidder, want a rebid.

    They claim CBN offered a black-and-white “polycarbonate” card they say is less secure than their color-picture IDs on cards made of “Teslin.” The losing bidders say they also weren’t informed the state wanted a black-and-white polycarbonate card and that CBN received an illegal advantage. De La Rue and MorphoTrustUSA said they could have offered a bid on that type which could save taxpayers’ money.

    The lawsuit also claims the state had required a color image ID, a requirement they claim CBN violated.

    The driver’s license contract is rebid under the federal “Real ID” measure from the Department of Homeland Security to make licenses more secure and more states are expected to face similar contract decisions.

    The state Department of Motor Vehicles won’t comment until the comptroller’s review concludes and the contract award is final. State records show cost was valued at just 20 percent of the evaluation of bids, with a 30 percent emphasis on security. Other categories included production and quality control, the production site and data security, the imaging device and experience and expertise, according to the record.

    Trade publications note the CBN technology and black-and-white photos are well-regarded for security in driver’s licenses and other documents.

    The losing companies claim poor judgment and mishandling of the bid is apparently to blame for the state’s decision.

    “Polycarbonate and Teslin are both highly secure materials suitable for drivers’ licenses,” said MorphoTrust Vice President and General Counsel Scott Boylan. “The key differences are value and flexibility. Polycarbonate is far more expensive than Teslin while providing no additional security benefit. Teslin cards also can accommodate color photos, which enable more security features, whereas polycarbonates cannot.”

    CBN “failed a mandatory technical requirement which related to the ability to provide color text for the cards, a mandatory requirement,” stated De La Rue in its lawsuit.

    State records show the DMV criteria for the bid, however, appear to not require a color image ID, according to a court filing.

    The state comptroller’s office is now evaluating the bids.

    “While I can’t comment on specific contracts, our impartial review of bid protests is essential to protect New Yorkers from millions of dollars in unnecessary costs,” said Kate Gurnett, spokeswoman for state Comptroller Thomas DiNapoli.

    “Our bid exactly met the requirements of the (Request for Proposal) and at significantly less cost to the New York taxpayer,” said De La Rue spokesman Rob Hutchison

    CBN and De La Rue are close competitors with a long history of providing secure documents including driver’s licenses. CBN also holds government contracts to print postage stamps, passports and visas that must be counterfeit-proof.

    State records show no campaign contributions from its top officers to any New York officials. CBN, founded in 1897, also has a lottery systems division for gaming run by governments, but has no contracts with New York where Gov. Andrew Cuomo is trying to expand gambling.

    Source: http://libn.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  A UK-based military hardware manufacturer will open a Sh3.5 billion plant in Mombasa to capture the growing arms race in Eastern Africa as well as target peace-keeping missions.

    Osprea Logistics has started construction of the plant following approval from the Kenya Investments Authority to assemble armoured cars and military trucks under the Mamba brand — which is commonly used by Africa Union peacekeepers, private contractors in Iraq and several African countries.

    This will be the first armoured vehicle manufacturer in the region and the company is targeting regional governments and peacekeeping missions in Congo, Sudan and Somalia, which are emerging as a fertile markets for military hardware.

    “Osprea plans its first-year production of Mamba Mk5’s to be over 100 vehicles, which can translate to work for over 200 people,” said Salih Brandt, the chairman of Osprea Logistics in an email response to the Business Daily.

    “Kenya is strategically located and offers great access to the rest of Africa compared to South Africa where Osprera’s other manufacturing plant is.”

    Mamba is a South-African made armoured personnel carrier that offers protection against small arms fire and land mines.

    Powered by a Mercedes Benz engine, it is suited for a rough terrain and can carry up to 10 passengers plus the driver.

    This has made it a favourite for military operations in remote zones and it became the face of the Iraq war following increased use by private security contractors.

    Rising threats of terrorism, cross-border raids and internal conflicts in East Africa have seen countries increase their military budgets.

    Kenya, Uganda and Tanzania have together increased their defense spending to Sh87 billion last year from Sh59 billion in 2007, according to data from the Stockholm International Peace Research Institute (Sipri), an independent research organisation.

    The data shows that Kenya’s spending at Sh45.8 billion was far much higher than that of Uganda, which had a budget of Sh21 billion, and Tanzania whose budget stood at Sh22 billion.

    Kenya, last year, ordered 67 US-made heavy truck diesel engines from South Africa, 37 of which have so far been delivered at an undisclosed cost.

    Uganda also showed the highest number of military equipment imports among EAC member countries.

    Burundi depicted one of the highest military budgets on the continent according to Sipri making the region a good market for an arms manufacturer.
    The region’s defense forces buy their armoured cars and trucks mainly from Russia and South Africa.

    “There is a tangible move world-wide towards ‘smart investing’ in defence budgets, with an emphasis on domestic procurement and industry in order to capture a dual benefit of domestic investing as well as platform efficiency,” says Mr Brandt.

    Source: By RAWLINGS OTINI, http://www.businessdailyafrica.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The Smart Card Alliance has released its second annual E-Yearbook, highlighting the events that happened in the North and Latin American smart card industry throughout 2012.

    This year’s review contains industry briefs, perspectives, insights and company profiles covering a wide range of markets and technologies. It also contains an expanded section on the EMV Migration Forum, information about the new Mobile and NFC Council, highlights of September’s Transportation Council meeting and reprints of white papers and position documents produced by the SCA throughout the year.

    The E-Yearbook is available at the SCA’s website. The SCA will send printed copies to members and have them available at Alliance conference events

    Source: http://www.contactlessnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The UAE Central Bank and the Emirates Identity Authority have met to consider enhancing co-operation in regards to using the smart ID card and activating its applications in the financial sector.
    The two agencies discussed creating a joint committee to draft a strategic co-operation agreement that includes a number of initiatives aimed at promoting the culture of digital ID and knowledge-based economy, as well as enabling the UAE Central Bank to upgrade the performance of the financial sector while protecting the identity of consumers with the advanced features of the Emirates ID card.
    According to a report in The Emirates News Agency, the UAE Central Bank clarified that its draft strategic and operational plan includes an initiative for creating an e-wallet system using the ID card that would ultimately replace cash for the management and operation of the UAE Central Bank.
    Emirates ID says it’s ready to provide maximum support to ensure the success of all the development projects and initiatives that are implemented or planned to be implemented, as a part of the government’s initiative to engage in a knowledge-based economy in a manner that serves the top interest of the UAE.
    As reported previously in BiometricUpdate.com, official transactions related to Emirates ID cards were disrupted for nearly two days following a technical glitch with its online e-form system.
    In 2009, Emirates ID developed a plan which contributed to doubling the number of population register and therefore, the fingerprints of individuals over the past three years by six times.

    Source: By Adam Vrankulj, http://www.biometricupdate.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The Egyptian government has recently approved a new smart card system for subsidized fuels, originally proposed by the ministries of finance and petroleum.
    The program, designed to ensure that those in most need of these subsidizes are indeed those who receive it, would charge the ministries of petroleum and mineral resources with implementing and overseeing the new smart card program for the National Bank of Egypt and Ahly banks.
    In this process, contracts were awarded to both government banks without a bidding process, in order to quickly implement the new laws to take hold in April, Daily News Egypt reports.
    Logistically, daily transfers will be made to companies producing petroleum products and will be represented in the difference in price for fully and partially subsidized fuel for the amount consumed through the smart card program. A database of beneficiaries will also be created.
    Many distribution programs like this take off without a hitch, but there are also those that encounter resistance along the way.
    Reported in BiometricUpdate.com, a system in India has been implemented which sees the production and distribution of biometric food ration cards, though members of an indigenous group have demanded the withdrawal of the cards, citing irregularities and complications in obtaining food.

    Source: By Adam Vrankulj, http://www.biometricupdate.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Gemalto is providing the Royal Oman Police with an electronic passport solution for the Sultanate. Applicants will be issued with secure travel documents in line with Oman’s goal to provide enhanced services and protection to its citizens, using digital security technologies. ??

    The solution includes Gemalto’s ICAO compliant Sealys e-passport documents and a full Coesys solution suite to enroll citizens, personalize and issue secure documents. The multi-year contract also covers training, support and maintenance services.

    Major Royal Oman Police offices will be equipped with fixed and mobile stations to register e-passport applicants with personal information and biometric data. Each e-passport will feature secure embedded software and a contactless microprocessor which will contain the holder’s digital fingerprints and. The solution will facilitate Omani travelers immigration control, and speed up the passport application and document issuance process. ??

    In the public sector, Gemalto is contributing to more than 80 government programs worldwide, supporting for example e-passport initiatives in Côte d’Ivoire, Denmark, Estonia, France, Korea, Norway, Malta, Morocco, Portugal, Singapore, Sweden and the U.S.

    Source: http://www.secureidnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Libya has taken delivery of 49 armoured support vehicles from Jordan. Some 120 of the UAE-designed and built NIMRs, in two variants, have already been in service with the Libyan army .

    The spokesman for the Libyan General Staff. Ali Shiekhi was quoted by Chinese news agency Xinhua today as saying that the new NIMRs had been supplied as a result of an agreement made last year, between the Ministry of Defence and Jordan. The new armoured vehicles are to be deployed immediately on border patrol duties.

    More than 500 NIMRs have been sold, mostly in Jordan, Lebanon, Libya and the UAE, and the firm says that it has a further 1,800 orders. The composite ceramic-armoured NIMRs, which come in four and six-wheel variants and a range of configurations, are according to the manufacturers, the first such military vehicles to be designed specifically to operate in extreme desert conditions. NIMR Automotive which conceived and makes the armoured vehicle, is a part of the UAE’s Tawazun conglomerate, which specialises in defence equipment. Algeria was last year seeking to establish a local plant to build and assemble NIMRs.

    Source: http://www.libyaherald.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  ABI Research forecasts 8.6 billion smart cards will ship in 2013, spanning all smart card markets. Of the total shipments, 16% are forecasted to use a contactless interface but that will rise to 30% by 2018.

    Government ID, transportation and ticketing, and payment cards continue strong double-digit growth in contactless adoption. Single-wire protocol SIM card volumes continue to strengthen, and are expected to break the 500 million mark in 2018.

    “The increase in contactless adoption is not limited to a selection of markets, although it’s the banking and government verticals which are adopting contactless technology at a quicker rate, with the SIM market close behind,” comments Phil Sealy, research analyst at ABI.

    Over the next three years ABI Research expects to see a shift in the penetration ratio of pure contactless and dual interface shipments. In 2013, ABI Research forecasts 59% of all contactless deployments will utilize a pure contactless interface, reducing to 38% in 2018.

    The increase in dual interface adoption is apparent across multiple markets. IC vendors NXP, Infineon, and STMicroelectronics are positioned to offer the best combination of convenience and high-end security over multiple applications. Additionally, the increase in dual interface adoption will deliver greater margins benefiting IC and smart card vendors alike.

    “ABI Research tracks new services and credentials regionally, including governments issuing new national ID and social welfare cards, mobile network operators with SIM-based NFC payment services and wallets, and banks jumping to next-generation dual interface EMV cards,” Sealy states. “As a result ABI Research forecasts that dual interface shipments will exceed the 1 billion mark in 2015.”

    Source: http://www.secureidnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The National Health Insurance Scheme (NHIS) will this year introduce biometric identity cards which will be issued instantly at the point of registration to subscribers.

    It would also start work on piloting electronic claims (E-claims) processing and host an extended stakeholder review of the capitation pilot in the Ashanti Region to inform its improvement and the subsequent nationwide rollout of this provider payment method.

    The Chief Executive of the National Health Insurance Authority (NHIA), Mr Sylvester A. Mensah, disclosed this when he addressed members of the core management team of the NHIS and some key stakeholders at a management retreat held at Elmina in the Central Region.

    Mr Mensah noted that although remarkable progress had been made in meeting targets, there was the need to consolidate those achievements and make the scheme more efficient, adding that 2013 would be a busy year for the authority.

    He said the NHIA intended to establish three more claims processing centres in the Northern, Central and Ashanti regions, to complement the centre in Accra. This, he maintains, would complete efficiency measures into claims management nationwide.

    Among other numerous initiatives, Mr Mensah disclosed that the scheme would be re-branded consistent with the new law, new vision and mission and operational architecture of the NHIS, adding that the financial manual of the NHIA would also be reviewed to place greater responsibility on the centre to prevent the abuse and fraud occurring at the regional and scheme levels.

    Others are: a permanent and joint clinical and claims audit team would be established to undertake forensic claims audit across the country all-year round to track isolated cases of connivance between schemes and providers.

    Mr Mensah mentioned that subscriber satisfaction was a key performance indicator for the NHIA, therefore, a subscribers’ handbook detailing the benefit package, medicines and subscriber rights and obligations would be compiled and made available to all subscribers at the point of registration and membership renewal.

    In order to further educate the public on the operations of the scheme, Mr Mensah said a quarterly NHIS policy dialogue forum to be beamed live on television stations would be instituted.

    Also, the NHIS medicines list/pricing would be reviewed to reflect market realities.

    He further said the authority would begin modernising and transiting from an ICT concept, “which places more emphasis on infrastructure, to a management information system (MIS) which places premium on generating information for management decision-making”.

    Among a litany of achievements recorded in 2012, he cited the passage of the new law, NHIA 2012, Act 852, the upward review of provider Tariffs by 26 per cent, creation of the condition to accommodate family planning in the NHIS benefit package, development of a consolidated premium account, the pilot of capitation in the Ashanti Region, the establishment of an operational call centre and functional clinical audit division.

    Mr Mensah told the management team that “posterity will not forgive us if, in nurturing this infant institution, it slips into structural, operational, and financial inefficiency”.

    The President of the Ghana Medical Association (GMA), Dr Kwabena Opoku-Adusei, who was present at the event, pledged his association’s commitment to the NHIS.

    He gave an assurance that the GMA would continue to be a strong ally of the NHIS and would collaborate with the authority on the rollout of capitation across the country, if all their concerns were addressed.

    He said the GMA would continue to constructively criticise the NHIA to ensure that the scheme stands the test of time.

    Other participants and contributors included a former Health Minister, Dr Richard Anane, under whose watch the law which established the NHIS was passed in 2003 (Act 650), and other foreign delegations.

    Source: http://graphic.com.gh

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  New research from ABI Research forecasts 8.6 billion smart cards to be shipped worldwide in 2013; a combined number spanning all smart card markets. Of the total forecasted shipments, 16 percent are expected to use a contactless interface.
    ABI attributes most of this growth to the increase in adoption of Government ID, transportation and ticketing and payment card systems. In 2013, ABI forecasts 59% of all contactless deployments will utilize a pure contactless interface, reducing to 38% in 2018.
    According to the company, “The increase in dual interface adoption is apparents across multiple markets. IC vendors, NXP, Infineon and STMicroelectronics are positioned to offer the best combination of convenience and high-end security over multiple applications. Additionally, the increase in dual interface adoption will deliver greater margins benefiting IC and smart card vendors alike.”
    ABI’s Market Data report focuses on the collection of primary data from leading manufacturers of smart cards and secure ICs. The data includes the installed base and annual shipments of smart cards and secure ICs by technology and interface type, by region and vertical markets.
    “The increase in contactless adoption is not limited to a selection of markets, although it’s the banking and government verticals which are adopting contactless technology at a quicker rate, with the SIM market close behind,” Phil Sealy ABI Research analyst said. “ABI Research tracks new services and credentials regionally, including governments issuing new national ID and social welfare cards, MNOs with SIM-based NFC payment services and wallets, and banks jumping to next-generation dual interface EMV cards. As a result, ABI Research forecasts that dual interface shipments will exceed the 1 billion mark in 2015.”
    Last year, in a Biometrics Research Note, Rawlson King forecasted that the market for electronic identity cards – for which smart cards are often used – will reach US$5.2 billion by 2015.
    Smart cards often carry biometric data of the card holder and are finding their way into many workflow processes, identity programs among a long list of uses.
    BluStor is an emerging player in the smart card market, currently developing a smart card with an 8GB capacity, to enable the downloading of apps and to verify identity absent of a data connection. BiometricUpdate.com recently had a chance to talk shop with CEO Finis Conner about how BluStor came to be, his ambitions as chief executive as well as what the future holds for his company.

    Source: By Adam Vrankulj, http://www.biometricupdate.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Papua New Guinea’s Defence Minister, Fabian Pok, says a two-million US dollar military aid grant from China will be spent on armoured cars, troop carriers and uniforms.
    The grant follows Dr Pok’s talks with his Chinese counterpart General Liang Guanglie in Beijing last month and meetings there with exporters of military ware.
    The visit comes as PNG plans a five fold increase in troops over the next decade.
    Dr Pok says PNG will also ask China to help maintain swimming pools and gymnasiums at PNG’s military barracks.
    “They want to be seen as not being too involved in our military issues here. China is also trying to export things like uniforms and armoured cars and all these things. So it’s also in the business interests of not the Chinese military but people who are building these things to market their products to countries like Papua New Guinea.”

    Source: http://www.rnzi.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Frost & Sullivan has released new analysis stating that the global border control and biometrics market will see increased growth due to international cooperation. However, this growth may not be realized unless privacy issues are resolved and organizations are able to measure ROI.

    The analysis, “Global Border Control and Biometrics Market Assessment,” covers the security, military, government and law enforcement sectors of the industry. It found that the market’s 2012 revenues were $5.8 billion, and it anticipates that the market will earn $15.8 billion in 2021.

    Frost found that one of the main drivers in this market growth stemmed from agencies and organizations working together on an international level to collaborate on travel security, which has led to more implementation of electronic documents and readers.

    Western markets have been at the forefront of this trend, with many countries having e-passports and testing eGates. Many pilot projects are taking place in Europe, with facial recognition technology being the preferred biometric modality. Russia is also looking into the use of biometrics as an identifier.

    Eastern markets, such as China and India, are just starting to incorporate e-passports and eGates into their travel processing systems.

    While the opportunity for growth is good, Frost does caution that budget cuts and privacy concerns could have a detrimental effect on plans to invest in biometric technology; however, cheaper technology and public education could mitigate those possibilities.

    Source: http://www.secureidnews.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  For many years now, IT professionals have become more and more active in discussions about physical access control systems and there has been an active debate about the need for convergence between physical and logical access. IT managers use electronic means to secure logical assets; security managers use physical access control methods to secure facilities. On the surface, it would seem that both departments would benefit greatly from collaboration since both of their problems boil down to permitting access to the right people.

    With such an obvious synergy and benefit to taking a more holistic view of enterprise security, why hasn’t this yet happened? What are the real barriers preventing companies from moving in this direction?

    Perhaps one of the answers lies with the fact that we’ve been more focused on the “what” than the “who.” If organizations are really going to make a meaningful impact on protecting their assets, whether physical or virtual, it’s most important to focus on the “who”—and coordinating that task between IT and security is becoming important.



    Who was that (really)?

    Although privileges are assigned to people, it’s not always clear who is entering a password or who is carrying an RFID card. The risk of not knowing “who” varies from asset to asset. Is it enough to be the holder of a swipe card to enter a parking garage? Probably. How about to access a medical record? Absolutely not!

    It is in this context that biometrics is playing a larger role in securing facilities and assets of all kinds. With the introduction of multispectral imaging, biometrics has become reliable enough to deal with the fundamental issue of knowing “who” to a much higher degree of confidence.

    In fact, by linking physical identity to a myriad of digital identities, converged identity and access management solutions become much more powerful. There is no meaningful access management without first establishing the “who” in transactions. Who is accessing my facility? Who is punching the time clock? Who is withdrawing funds from that ATM? The question is always, “Who?”

    Thus, while access and authorization have always been granted to individual people, knowing a password or having a key is only superficially related to the authorized person—and neither can establish who exactly that is. Only biometric technology can do that.



    It’s more than just about security

    We’ve all seen it: business grinds to a halt after the deployment of a new security system. Designing an authentication solution that is both secure and convenient—that’s where the value is for the customer.

    Convenience in an authentication solution is ease-of-use, accessibility, speed and all of the other things that become important to an organization after the primary objective—security—is met. Staffing help desks to reset passwords or reissue swipe cards while the employee is standing by is not an efficient use of resources. Nurses on a hospital floor cannot waste valuable seconds fumbling with the numbers and special characters in a password when accessing medical supplies.

    A biometric solution can lower risks, reduce costs and improve efficiencies. It can meet regulatory requirements, provide an audit trail and facilitate transactions, all without getting in the way of business. Today, biometric solutions authenticate people requiring access to secure facilities, sensitive records, government services and controlled substances. The possibilities and benefits are real if the biometric is chosen carefully.

    Security integrators are already aware that biometric technologies and scanners are not created equal. Some optical sensors work very well when the finger is clean and prepped with lotion. Is that convenient? Other sensors work perfectly—on the third or tenth try, while a line forms behind the user. These situations are the cases that cause security managers to abandon an application.

    On the other hand, multispectral imaging is capable of overcoming the myriad of fingerprint capture problems that conventional imaging systems have in less-than-ideal conditions. The high performance delivered by multispectral biometrics affects more than security, it allows authentication to recede into the background while authorized people go about their business. That’s no compromise, that’s convenience!



    What about customers?

    Because biometrics can be so quick and easy to use, they are ideal for customer-facing applications. Today, financial institutions around the world are embracing multispectral fingerprint biometrics for authenticating customer transactions. In addition to enhancing transaction security, banks are able to provide additional convenience for their customers because there is no need for training; customers just present their finger at the ATM.

    Biometric patient authentication is becoming important for reducing medical errors and for minimizing fraudulent access to healthcare. Government and private insurance programs around the world rely on multispectral fingerprint biometrics to prevent fraudulent use of the policy. Officials at one government program report that the biometric deployment actually facilitates faster access to medical service by authorized patients while saving costs.

    Theme park access is a customer-facing application where convenience plays a special role. To prevent ticket fraud, one major international theme park wanted to be able to link each ticket to a specific customer. However, because the overriding goal was to create a positive environment for paying customers, there couldn’t be even the illusion of a barrier between a customer and the park. The transaction had to be quick and intuitive for anyone to use. It’s significant to note that this biometric solution did not require identification of the customer, assuring the privacy of guests. Multispectral fingerprint authentication was chosen for its reliability and convenience. As a result, the solution reduced transaction time, enhanced customer experience and reduced ticket fraud.

    This scenario is being repeated in other commercial customer-facing situations, such as membership-only fitness clubs, large sporting events, nightclubs and other places where it’s important to maintain convenience for the customer, even during an authentication transaction.



    Deploy an enterprise-wide

    authentication solution

    IT managers have their hands full. Threats are coming from every direction and on top of it all employees want to use their own devices. Users hate security solutions that simply get in the way of them doing their jobs. Multifactor authentication is becoming a must, but the difficulty of managing point solutions is increasing risk, not reducing it. And the smartest smartcard still cannot assure the organization that the person holding is it the person it was issued to. They need to know “who.”

    Security integrators know “who.” They’ve been integrating biometrics at the door for some time now. Perhaps it’s time to walk across the hall and have a conversation with the IT manager about integrating biometrics into an enterprise-wide authentication solution.

    Source: By BY PHIL SCARFO, http://www.securityinfowatch.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  Brigadier-General Kwame Opoku-Adusei, the General Officer Commanding the Northern Command of the Ghana Army, on Tuesday said the government has purchased 34 armoured reconnaissance vehicles to argument the logistics of Ghanaian peacekeepers.

    The armoured vehicles are to facilitate the migration of Ghanaian peacekeepers from the “Dry Lease” to the “Wet Lease system,” Brig-Gen. Opoku-Adusei stated during Ghanbatt 77’s Medals Presentation Parade at Lebanon.

    He said the military high command had outlined plans to provide logistical support for the migration of the Ghanaian contingent on peacekeeping duties in Lebanon (Ghanbatt) from the “Dry Lease” to the “Wet Lease” system to enable it to be self-sufficient.

    A Ghana Armed Forces statement issued in Accra and signed by Lieutenant Commander M. A. Larbi and copied to the Ghana News Agency (GNA) said the Commander of the Northern Command commended the Ghanbatt 77.

    “I am personally satisfied with what I have seen and heard about your performance during my visit to the Ghanbatt Area of responsibility and I urge you all to continue with the good work”.

    Brig Gen Opoku-Adusei, who was the head of a six-member military delegation to Lebanon, used the occasion to update troops on current developments in the country as well as within the Ghana Armed Forces.

    The Commander and his team also paid a courtesy call on United Nations Interim Force in Lebanon (UNIFIL) Deputy Force Commander, Brig Gen Patrick Phelan, who expressed appreciation for the performance of Ghanaian troops.

    The Commanding officer of Ghanbatt 77, Lt Col Francis Anemana, assured the delegation that Ghanbatt is poised in executing its assigned tasks successfully despite the challenges.

    Chief Military Personnel Officer, Col Reginald Yemo Odoi, thanked the government of Ghana for the high profile delegation to the Medals Day Parade and described Ghanbatt 77 as a wonderful battalion which executed its task with high professionalism to the admiration of UNIFIL High Command.

    Source: http://www.ghanaweb.com

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
  •  The Government of the Macau Special Administrative Region of the People’s Republic of China has awarded a contract for the manufacture and development of smart ID cards for its residents.

    The new generation of ID cards will be purely contactless, and will store personal data and biometric information such as fingerprints on a digital chip embedded in the card. The IDs can be used as conventional IDs, providing sophisticated visual and electronic proof of identity, but will also allow citizens to carry out transactions with the government electronically, saving time and effort.

    The contactless system will also provide faster data transfer rates while card reading, useful especially for the large number of people who use their IDs in regular travel between Macau, Hong Kong, and China, as the processing time for travellers will significantly reduce. The new national ID card will also support contactless electronic signatures.

    A security protocol developed by Germany’s Federal Office for Information Security will be used to ensure the security of data on the cards and during contactless transactions. Named PACE (Password Authenticated Connection Establishment), the protocol will create a secure connection between the chip in the card and a card reader, and encrypt data before the transfer.

    The contract for the manufacture and delivery of the cards was awarded to Munich-based technology company, Giesecke & Devrient. In addition to development and manufacture of the cards, G&D will develop the required smartcard applications and modify the existing infrastructure according to the needs of the new technology.

    The government will also receive an advanced operation system platform for smartcards, which will be ready to support additional features in the future, such as contactless payment. The new set of ID cards is expected to be introduced in October 2013.

    Source: By Sumedha Jalote, http://www.futuregov.asia/

    Disclaimer: The above news is at the sole discretion of Tender Impulse subsribers only and in no ways intends to bring commercial benefits to Tender Impulse.
 country Description