Pre Heating Furnace (Crown and Bridge)
This tender is from the country of Kuwait in Middle East region. The tender was published by KUWAIT OIL COMPANY on 21 Jun 2023 for Quotation are invited for Pre Heating Furnace (Crown and Bridge). Issue Date: 19-Jun-2023 Due Date: 16-Jul-2023 Due Time: 13:00 PRE HEATING FURNACE (CROWN AND BRIDGE) TECHNICAL SPECIFICATION SUPPLY, INSTALLATION AND DEMONSTRATION OF PRE HEATING FURNACE (CROWN AND BRIDGE) COMPLETE WITH ALL STANDARD ACCESSORIES AND CONSUMABLES Quantity Required: 1 no. Brief description: Cylinder furnace manufactured using the latest heating and control techniques to achieve top-quality results in Dental lab complete with all standard accessories. 1. Minimum requirements: 1.1 Electronic control unit with Micro-processor 1.2 Maximum temperature 1000⁰ C or better 1.3 Alumina fiber muffle 1.4 Necessary dewaxing plates and clamp shall be included 1.5 Chamber size 23 x 30 x 15 cm approx.. 1.6 Shall have different programs with choice of temperature, temperature rate and holding time. 1.7 Unit shall be suitable to operate on 240V ± 6%, 13 Amp, 50 Hz AC single phase power supply. 2. Accessories and Consumables: 2.1 All standard accessories and consumables necessary for the smooth operation of system shall be provided. 2.2 The offer shall clearly indicate the quantity, unit prices and size of accessories and consumables included. 3. QUALITY ASSURANCE The Contractor shall verify that the manufacturer of the Equipment complies with internationally recognized quality control systems; such as; FDA, (ISO9001), CE in accordance with the European Active Medical Device and the Directives issued by British Standards Institute (BSI) or Canadian Standards Association (CSA) or ULUnderwriters Laboratory, USA. 4.1 Offers must be accompanied with detailed/original catalogues, and complete technical information such as model, components and the exact features applicable. Variations to the specifications must be clearly stated. 4.2 Bidder shall have adequate work facilities with spares and qualified/ factory trained engineer/s, as a part of his permanent staff, so as to provide immediate local support by attending to any complaints/maintenance requests, as and when required. 4.3 Bidder to provide manufacturer’s recommended list of spare parts (required for normal operation and preventive maintenance service) with Performa invoice for C&F prices. 4.4 Bidder to quote separately yearly rate for two years maintenance service after the expiry of warranty period. Maintenance service shall be comprehensive, fully inclusive of the maintenance, repairs and spares. 4.5 Warranty shall be comprehensive, fully inclusive of the maintenance, repairs and spares for a minimum period of two years from the date of complete installation of the equipment on site. 4.6 During warranty period, the supplier shall visit the site at regular intervals for service/maintenance. 4.7 Two sets of operation and service manuals in English language shall be provided along with the equipment. 4.8 Bidder shall by not later than the expiry of the first three (3) months of issue of purchase order complete the delivery, installation and demonstration of the equipment.. The last date to submit your bid for this tender was 16 Jul 2023. This tender is for the companies specializing in Bridge construction work and similar sectors.
*The deadline for this tender has passed.
Tender Organisation:
KUWAIT OIL COMPANY
Tender Sector:
Tender Service:
Worldwide
Tender Region:
Tender Country:
Tender CPV:
45221110 : Bridge construction work
Tender Document Type:
Tender Notice
Tender Description:
Quotation are invited for Pre Heating Furnace (Crown and Bridge). Issue Date: 19-Jun-2023 Due Date: 16-Jul-2023 Due Time: 13:00 PRE HEATING FURNACE (CROWN AND BRIDGE) TECHNICAL SPECIFICATION SUPPLY, INSTALLATION AND DEMONSTRATION OF PRE HEATING FURNACE (CROWN AND BRIDGE) COMPLETE WITH ALL STANDARD ACCESSORIES AND CONSUMABLES Quantity Required: 1 no. Brief description: Cylinder furnace manufactured using the latest heating and control techniques to achieve top-quality results in Dental lab complete with all standard accessories. 1. Minimum requirements: 1.1 Electronic control unit with Micro-processor 1.2 Maximum temperature 1000⁰ C or better 1.3 Alumina fiber muffle 1.4 Necessary dewaxing plates and clamp shall be included 1.5 Chamber size 23 x 30 x 15 cm approx.. 1.6 Shall have different programs with choice of temperature, temperature rate and holding time. 1.7 Unit shall be suitable to operate on 240V ± 6%, 13 Amp, 50 Hz AC single phase power supply. 2. Accessories and Consumables: 2.1 All standard accessories and consumables necessary for the smooth operation of system shall be provided. 2.2 The offer shall clearly indicate the quantity, unit prices and size of accessories and consumables included. 3. QUALITY ASSURANCE The Contractor shall verify that the manufacturer of the Equipment complies with internationally recognized quality control systems; such as; FDA, (ISO9001), CE in accordance with the European Active Medical Device and the Directives issued by British Standards Institute (BSI) or Canadian Standards Association (CSA) or ULUnderwriters Laboratory, USA. 4.1 Offers must be accompanied with detailed/original catalogues, and complete technical information such as model, components and the exact features applicable. Variations to the specifications must be clearly stated. 4.2 Bidder shall have adequate work facilities with spares and qualified/ factory trained engineer/s, as a part of his permanent staff, so as to provide immediate local support by attending to any complaints/maintenance requests, as and when required. 4.3 Bidder to provide manufacturer’s recommended list of spare parts (required for normal operation and preventive maintenance service) with Performa invoice for C&F prices. 4.4 Bidder to quote separately yearly rate for two years maintenance service after the expiry of warranty period. Maintenance service shall be comprehensive, fully inclusive of the maintenance, repairs and spares. 4.5 Warranty shall be comprehensive, fully inclusive of the maintenance, repairs and spares for a minimum period of two years from the date of complete installation of the equipment on site. 4.6 During warranty period, the supplier shall visit the site at regular intervals for service/maintenance. 4.7 Two sets of operation and service manuals in English language shall be provided along with the equipment. 4.8 Bidder shall by not later than the expiry of the first three (3) months of issue of purchase order complete the delivery, installation and demonstration of the equipment.
Tender Bidding Type:
Tender Notice No:
Tender Document:
- 1 week to go
- 15 Days to go
- More than 15 days to go
Get A Callback Within 24 Hours
Fill form below to get callback from Tender Experts.
Explore More Bridge construction work Tenders in Kuwait, Middle East, and Worldwide
Looking for more tenders like this one in Bridge construction work? With over 70 million global procurement opportunities and new tenders added daily, Tender Impulse is your gateway to international and local contracting success. Whether you're targeting the Infrastructure and construction sector in Kuwait, or expanding across regions, we provide live, accurate, and relevant updates every day.
Our platform sources tenders from:
- National and local government portals
- International development and funding agencies
- Municipal corporations and state authorities
- NGOs, education ministries, and public-private partnerships
Daily Tender Updates Across 200+ Countries
Every day, we add hundreds of new RFPs, RFQs, EOIs, and contract awards across multiple sectors and geographies. This tender from Kuwait is just a sample of what's available right now.
Tender Impulse covers:
- Public procurement tenders
- International development projects
- Local municipal bids
- Private and PPP contracts
- Framework agreements and supply tenders
Search Smarter with CPV and Industry Matching
Each listing is categorized using CPV codes like 45221110, enabling precise filtering. Search by:
- Tender type: RFP, RFQ, EOI, GPN, Contract Awards
- Location: Kuwait, Middle East, or global
- Industry: Infrastructure and construction
- Deadline and issue date
- Issuing organization or funding agency
Opportunities in Every Industry and Region
While you're viewing a tender in Kuwait, Tender Impulse offers access to tenders across:
- Asia, Europe, Africa, the Americas, and Oceania
- Defence, Energy, Healthcare, Construction, Education, IT, Agriculture, and more
- All CPV categories—from consultancy to infrastructure
Tools to Help You Succeed
Tender Impulse provides more than listings:
- Custom email alerts by CPV and location
- Downloadable bid documents and submission support
- Registration guidance and compliance tools
- Translation support for non-English tenders
- Proposal writing tips and examples
Stay Ahead with Real-Time Updates
Thousands of new tenders are added daily-across countries, sectors, and CPV codes. With Tender Impulse, you gain strategic insight, timely alerts, and a competitive edge.
Start your free trial to unlock tenders customized to your Infrastructure and construction, Kuwait, and Bridge construction work categories.