The contract includes the implementation of activities Coating of test molds and Coating of test sets of molds which due to material and technological interdependence are entered together in one tender nThe subject of performance is the provision of services consisting in n tcoating of test samples of glass molds and entire sets of molds supplied by the client or its customers using the HiPIMS TiAlCrN method which will subsequently be tested in real life operation n analysis and characterization of coatings including measurement of their mechanical tribological and structural properties evaluation of their behavior and provision of data for subsequent optimization of the coating process n tTechnical requirements for the coating target parameters n tCoating system AlTiCrN HiPIMS or equivalent pulse deposition technology enabling high peak current density to be achieved in a real process typically at least at the level of approx 0 8 A cm n tThe composition of the coating will be optimized during the performance of the order with the aim of achieving the required functional properties n tThe client requires that at least two variants of the chemical composition of the coating containing titanium be designed prepared and experimentally verified as part of the performance n tcca 6 at Ti n tcca 10 at Ti n twith the current requirement for a nitrogen content of at least 50 at n tThe supplier can also propose other composition variants if they lead to achieving or improving the required properties of the coating n tCoating thickness 1 5 m measured by calotest or profilomer n tSurface roughness Ra 0 1 m n tAdhesion n tscratch test ISO 20502 LC2 50 N and Rockwell HF1 n tHardness 20 GPa n tModulus of elasticity 300 GPa measured by instrumented indentation nNote The listed parameters represent target values based on the development of coated samples to date The contracting authority allows their modification during the implementation of the order depending on the optimization of the process and the behavior of the coating on real glass molds nBreakdown of services n Coating of trial molds CZK 1 200 000 n Coating of trial sets of molds CZK 1 700 000 neach of which includes the following n tcoating of trial molds and mold sets nThe aim is to ensure high quality coating with the HiPIMS method TiAlCrN on test glass forms supplied by the client or its customers which will subsequently be tested in real operation n tacceptance and preparation of test forms supplied by the customer n tcleaning and pretreatment of surfaces n tapplying the coating using the HiPIMS TiAlCrN method n thanding over the coated forms for testing n processing of the report on individual depositions including key deposition parameters e g power pressure bias expected composition of layers n analysis and characterization of coatings nThe goal is to carry out a comprehensive set of measurements and analyzes of coatings leading to the determination of their mechanical tribological and structural properties and their use for evaluating the functionality of the coating while the results will serve as a basis for subsequent optimization of the coating process by the client based on testing in real operation of glass plants forms n measurement of mechanical properties hardness modulus of elasticity - e g instrumented indentation according to ISO 14577 n tevaluation of coating adhesion e g scratch test according to ISO 20502 and Rockwell test n determination of coating thickness and microstructure e g calo test SEM or equivalent methods n measurement of surface roughness e g profilometry determination of residual stresses in of the coating n tribological testing e g pin-on-disc or equivalent method coefficient of friction wear resistance n measurement of the chemical composition of the coating e g EDS possibly XPS or equivalent methods n elaboration of a protocol on testing and results nThese measurements are carried out to the extent necessary to evaluate the properties of the coatings typically on selected representative samples at each deposition 71900000-7 Laboratory services Czech Republic 71900000-7 Laboratory services Laboratory services

The AdvaMat Coatings s r o in Czech Republic from Europe region had released this tender for The contract includes the implementation of activities Coating of test molds and Coating of test sets of molds which due to material and technological interdependence are entered together in one tender nThe subject of performance is the provision of services consisting in n tcoating of test samples of glass molds and entire sets of molds supplied by the client or its customers using the HiPIMS TiAlCrN method which will subsequently be tested in real life operation n analysis and characterization of coatings including measurement of their mechanical tribological and structural properties evaluation of their behavior and provision of data for subsequent optimization of the coating process n tTechnical requirements for the coating target parameters n tCoating system AlTiCrN HiPIMS or equivalent pulse deposition technology enabling high peak current density to be achieved in a real process typically at least at the level of approx 0 8 A cm n tThe composition of the coating will be optimized during the performance of the order with the aim of achieving the required functional properties n tThe client requires that at least two variants of the chemical composition of the coating containing titanium be designed prepared and experimentally verified as part of the performance n tcca 6 at Ti n tcca 10 at Ti n twith the current requirement for a nitrogen content of at least 50 at n tThe supplier can also propose other composition variants if they lead to achieving or improving the required properties of the coating n tCoating thickness 1 5 m measured by calotest or profilomer n tSurface roughness Ra 0 1 m n tAdhesion n tscratch test ISO 20502 LC2 50 N and Rockwell HF1 n tHardness 20 GPa n tModulus of elasticity 300 GPa measured by instrumented indentation nNote The listed parameters represent target values based on the development of coated samples to date The contracting authority allows their modification during the implementation of the order depending on the optimization of the process and the behavior of the coating on real glass molds nBreakdown of services n Coating of trial molds CZK 1 200 000 n Coating of trial sets of molds CZK 1 700 000 neach of which includes the following n tcoating of trial molds and mold sets nThe aim is to ensure high quality coating with the HiPIMS method TiAlCrN on test glass forms supplied by the client or its customers which will subsequently be tested in real operation n tacceptance and preparation of test forms supplied by the customer n tcleaning and pretreatment of surfaces n tapplying the coating using the HiPIMS TiAlCrN method n thanding over the coated forms for testing n processing of the report on individual depositions including key deposition parameters e g power pressure bias expected composition of layers n analysis and characterization of coatings nThe goal is to carry out a comprehensive set of measurements and analyzes of coatings leading to the determination of their mechanical tribological and structural properties and their use for evaluating the functionality of the coating while the results will serve as a basis for subsequent optimization of the coating process by the client based on testing in real operation of glass plants forms n measurement of mechanical properties hardness modulus of elasticity - e g instrumented indentation according to ISO 14577 n tevaluation of coating adhesion e g scratch test according to ISO 20502 and Rockwell test n determination of coating thickness and microstructure e g calo test SEM or equivalent methods n measurement of surface roughness e g profilometry determination of residual stresses in of the coating n tribological testing e g pin-on-disc or equivalent method coefficient of friction wear resistance n measurement of the chemical composition of the coating e g EDS possibly XPS or equivalent methods n elaboration of a protocol on testing and results nThese measurements are carried out to the extent necessary to evaluate the properties of the coatings typically on selected representative samples at each deposition 71900000-7 Laboratory services Czech Republic 71900000-7 Laboratory services Laboratory services with tender notice no. N006/26/V00009690 published on 09 Apr 2026. The tender expired on 29 Apr 2026. This tender is sourced from Sri lb and is eligible for suppliers interested in Coating materials, Application work of protective coatings, Application work of anti-corrosive coatings. Interested bidders can obtain further information including complete bid documents or ways to participate by registering on Tender Impulse and referencing via Tender Impulse ID 12351697.