Tender Summary
The Jülich Research Centre GmbH - Construction Team in Germany from Europe region had released this tender for Work: Trade: Heating systems AG2 Component block Scope of heat generation: 1× Heat pump system consisting of at least 2 high-temperature heat pumps, natural refrigerant ammonia (R717) or ammonia-water mixture, total heating capacity nominal 5,120 kW, heat source 41/31 °C, heat sink 90/60 °C, buffer storage tanks 1× 60m³ and 1× 30m³ each including insulation. Pressure maintenance: 1× compressor-controlled pressure maintenance station PN 10 with diaphragm expansion vessel 3,000 l (DN 65), 1× vacuum spray tube degassing, 1× refill station with system separator BA and water meter PN 10, 8× safety valves; Static: 2× diaphragm expansion vessels 100 l and 2× 300 l, each PN 16; 8× inline pumps DN 100 to DN 250, 50 to 244 m³/h, delivery head 2.5 to 25 m, with frequency converter and control; 2× CIM interface modules, 4× Modbus RTU fittings and accessories, 4× ball valves DN 350/400 with electric actuator, 67× butterfly valves with gearbox and 11× with motor actuator (DN 125 to DN 400), 8× check valves, 6× strainers, 4× three-way control valves with actuator, 22× compensators, 225× weld neck flanges PN 10/16, 6× ultrasonic heat sensors DN 125 to DN 300, 16× large air vents, 7× shut-off valves, 1× heating element 60 kW, 65× weld-in sensors, piping approx. 405 m seamless steel pipe EN 10216-1, DN 15 to DN 500 (mainly DN 350 with 98 m, DN 200 with 52 m, DN 15 with 45 m, DN 250 with 39 m); 44 m stainless steel 1.4541 DN 125/150 for the NH3 blow-off pipes. Fittings steel: 122× 90° bends, 14× 45° bends, 67× tees, 80× reducers, 8× dished ends, 10× blind flanges (6× DN 250, 2× DN 350, 2× DN 400); Stainless steel: 9 x 90° elbows, 2 x weld-on flanges, 2 x casing pipes, 2 x annular seals, 2 x rain flaps, 2 x tensioning structures; insulation approx. 480 m of aluminum-faced mineral wool with sheet metal casing, DN 15 to DN 500 (mainly DN 350 with 118 m, DN 200 with 62 m, DN 150 with 52 m); additionally 53 m of diffusion-tight cold insulation DN 125/150 for the blow-off pipes; fastening and marking: 535 x galvanized screw pipe clamps with EPDM sound-insulating inserts, DN 15 to DN 400; 1,700 kg galvanized mounting systems plus 60 kg for wall mounting of the 300-liter vessels; 200× Label plates (140× 50 × 100 mm, 60× 150 × 100 mm) with tender notice no. 673101-2026 published on 07 Oct 2026. The tender expired on 05 Nov 2026. This tender is sourced from TED Europa and is eligible for suppliers interested in Heating works. Interested bidders can obtain further information including complete bid documents or ways to participate by registering on Tender Impulse and referencing via Tender Impulse ID 15267910.
Tender Details
Tender NoticeTI Ref: 15267910
Tender Notice No
673101-2026
Tender Organisation
Jülich Research Centre GmbH - Construction Team
Tender CPV
45232141 : Heating works
Tender Document Type
Competition
Tender Deadline
05 Nov 2026 Deadline passed
Tender Description
Work: Trade: Heating systems AG2 Component block Scope of heat generation: 1× Heat pump system consisting of at least 2 high-temperature heat pumps, natural refrigerant ammonia (R717) or ammonia-water mixture, total heating capacity nominal 5,120 kW, heat source 41/31 °C, heat sink 90/60 °C, buffer storage tanks 1× 60m³ and 1× 30m³ each including insulation. Pressure maintenance: 1× compressor-controlled pressure maintenance station PN 10 with diaphragm expansion vessel 3,000 l (DN 65), 1× vacuum spray tube degassing, 1× refill station with system separator BA and water meter PN 10, 8× safety valves; Static: 2× diaphragm expansion vessels 100 l and 2× 300 l, each PN 16; 8× inline pumps DN 100 to DN 250, 50 to 244 m³/h, delivery head 2.5 to 25 m, with frequency converter and control; 2× CIM interface modules, 4× Modbus RTU fittings and accessories, 4× ball valves DN 350/400 with electric actuator, 67× butterfly valves with gearbox and 11× with motor actuator (DN 125 to DN 400), 8× check valves, 6× strainers, 4× three-way control valves with actuator, 22× compensators, 225× weld neck flanges PN 10/16, 6× ultrasonic heat sensors DN 125 to DN 300, 16× large air vents, 7× shut-off valves, 1× heating element 60 kW, 65× weld-in sensors, piping approx. 405 m seamless steel pipe EN 10216-1, DN 15 to DN 500 (mainly DN 350 with 98 m, DN 200 with 52 m, DN 15 with 45 m, DN 250 with 39 m); 44 m stainless steel 1.4541 DN 125/150 for the NH3 blow-off pipes. Fittings steel: 122× 90° bends, 14× 45° bends, 67× tees, 80× reducers, 8× dished ends, 10× blind flanges (6× DN 250, 2× DN 350, 2× DN 400); Stainless steel: 9 x 90° elbows, 2 x weld-on flanges, 2 x casing pipes, 2 x annular seals, 2 x rain flaps, 2 x tensioning structures; insulation approx. 480 m of aluminum-faced mineral wool with sheet metal casing, DN 15 to DN 500 (mainly DN 350 with 118 m, DN 200 with 62 m, DN 150 with 52 m); additionally 53 m of diffusion-tight cold insulation DN 125/150 for the blow-off pipes; fastening and marking: 535 x galvanized screw pipe clamps with EPDM sound-insulating inserts, DN 15 to DN 400; 1,700 kg galvanized mounting systems plus 60 kg for wall mounting of the 300-liter vessels; 200× Label plates (140× 50 × 100 mm, 60× 150 × 100 mm)
Frequently Asked Questions About This Tender
Who has issued this tender, and what is it for?
The tender has been issued by Jlich Research Centre GmbH - Construction Team in Germany. Such a type of tender falls under Heating works, within the Oil and Gas sector, and is listed on Tender Impulse under notice number 673101-2026.
What are the key dates for this tender?
The notice was published on 07 Oct 2026 and submissions close on 05 Nov 2026. Late bids are rarely accepted in public procurement, so aim to have your documents ready several days before the closing date.
Which CPV codes apply to this tender?
It is classified under CPV codes 45232141, which correspond to Heating works. If your company supplies these products or services, these are the codes to save in your alert profile so no matching tender passes you by.
Can I submit my bid for this tender to Tender Impulse?
No - and this matters. Tender Impulse is a tender aggregation and alert service: we collect procurement notices from official sources around the world and list them in one place. We do not receive, forward or evaluate bids. Your bid for this tender must be submitted directly to Jlich Research Centre GmbH - Construction Team, using the method described in the original tender document, before 05 Nov 2026. Tender Impulse provides complete assistance in submitting all bids posted on its website.
How do I get the bid documents and participation details?
Request a live demo on Tender Impulse and our tender experts will walk you through this listing, share the available documents, and explain how to submit your bid to Jlich Research Centre GmbH - Construction Team. Subscribers also receive help with registration requirements and, where needed, translation of non-English notices - but the submission itself always goes from you to the buyer.
How can I find more tenders like this in Germany?
There are currently 28822 live tenders of 589605 total tenders from Germany on Tender Impulse. You can browse them on our Germany tenders page, or save a search combining Germany with CPV codes 45232141 - we will then email you every new match on the day it is published.
How to prepare for this bid?
Suppliers must verify technical specifications, the delivery schedules and any other intrinsic details as provided in the complete bid documents before deciding to submit their bids. All necessary certifications and supplier registrations must be undertaken before participation.
Is this tender beneficial for me?
The procurement is applicable to companies in the Heating works and related industries. If you belong to this industry, you can review the technical documents before assessing your relevance to your company.
What is the procurement trend for New Exaheat building, building 16.18w?
The public procurement trends for New Exaheat building, building 16.18w can be assessed by viewing historical data and buying patterns for this product. Subscribed members can view and even download reports of tenders released in the past for their market research. This shall allow them to carefully prepare a compelling bid.
Explore More Heating works Tenders in Germany, Europe Region and Worldwide
Looking for more tenders like this one in Heating works? With millions of global procurement opportunities and new tenders added daily, Tender Impulse is your gateway to international and local contracting success. Whether you're targeting the Oil and Gas sector in Germany, or expanding across regions, we provide live, accurate and relevant updates every day.
Our platform sources tenders from national and local government portals, international development and funding agencies, municipal corporations, state authorities, NGOs, education ministries and public-private partnerships.
Daily Tender Updates Across 190+ Countries
Every day we add hundreds of new RFPs, RFQs, EOIs and contract awards across multiple sectors and geographies. This tender from Germany is just a sample of what's available right now - there are currently 28,822 live Germany tenders to explore.
Search Smarter with CPV and Industry Matching
Each listing is categorised using CPV codes such as 45232141, enabling precise filtering by tender type, location, industry, deadline and issuing organisation.
Start Your Tender Journey
Request a free live demo to unlock tenders customised to your sector, country and CPV categories - with alerts, documents and submission support.