Rathaus burg lot 01 roof renovation sponge fighting

*The deadline for this tender has passed.

Tender Organisation:

Stadt Burg

Tender Sector:

Infrastructure and construction Tenders

Tender Service:

Worldwide

Tender Region:

Europe

Tender Country:

Germany

Tender CPV:

45000000 : Construction work

Tender Document Type:

Tender Notice

Tender Description:

Rathaus burg lot 01 roof renovation sponge fighting As part of the roof renovation at the historic town hall in Burg Construction site facility based on roofing room roof plumbing work lightning protection work and a proportionate sponge fight against the top ceiling beam position DG flooring The damage mapping of the sponge infestation under the DG beam position is available - Construction site equipment - Advance notice construction site - Use of public traffic areas - Building board EP - toilet cabin - Tool container - approx 122 m construction fence with additional foil clothing - traffic signs - Warning lights - traffic law orders - Temporary road closure -Mobile crane - slide rubble - approx 11 hours of various construction accounting containers for building rubble wood 10 m3 Capacity rubber removal from the floors included - approx 100 m2 of the reduction in the eaves crown covering with battens Contemporary battens eaves etc - approx 75 m corners renovation copper Z 400 - approx 47 m corners renovation complete - Disassemble about 200 m lightning protection system assemble measure - Use and cover about 300 m2 of weather protection plans every day - approx 94 m corned sheet cover copper Z 600 re -mount - approx 60 m rainfall pipes copper DN 120 re -re -mount including proportionate arches - approx 75 m trailerin copper Z 400 over cornice cover new Assemble including gutter inlet sheets and channel angles -ca 125 m2 synthetic resin coating cornices railings underground formwork - approx 30 m throat renovation of integrated throats in underlaid throats copper sheet Z 500 - approx 11 hours of gable riders concrete stone renovation - 1 hours check roof rider tower attachment with possibly renovation Room and slate work painting work - approx 11 m of ridge brick expansion - approx 34 m of gratitude remediation - approx 12 m renovation gable custody Z 333 170 -ca 18 m gable covers Copper up to Z 800 renovate - deliver approx 16 m3 timber - Disassemble approx 10 m3 old wood -ca Tie 1 000 m of timber - Correct about 158 m2 of plasterboard undercover - renovate about 30 hours of beam heads - renovate approx 30 m basic threshold - Install approx 150 m2 of output formation d 30 mm - Cancel about 6 m3 masonry dispose of -ca 6 m3 masonry new Reich format - approx 10 hours of beam head renovations from above as a allowance over Stuck ceiling - approx 27 m2 protection of a stucco ceiling allowance to the Support measures - approx 10 m disassembly and assembly of wall slats area over Stuck ceiling - Various small ice parts and replacement of historical Wood connections eaves areas above the stucco ceiling Lightning protection and Erdunqsanlaqe - approx 134 m fishing line CU - approx 20 ST derivation CU on masonry - approx 40 m derivation CU on downpipe - approx 20 ST derivation 8mm niro - approx 23 st connector - approx 30 ST clamps - approx 5 hours of catch tips - Psch Gun rod with distance holder - approx 6 st Earth were rod l 1000 mm -ca 4 st head hole for deep earth - approx 4 hours of grounding stabiners in multi -part z20 - approx 3 hours of extractor tubes - approx 2 hours of fireplace rod - approx 10 m of soil Ringerder V4a - approx 5 m cable ditch depth 0 5 m -ca 10 ST corrosion protection - approx 6 ST cross connectors - approx 10 hours of snow grille clamp - approx 20 ST connections - approx 100 m dismantling - Psch Measure check documentation Wood protection and sponge control - Cancel about 51 m of wall crowns and crush again - Clean approx 51 m2 wall and cavity surfaces -ca 48 m2 of wall surface foam process - Repair about 20 sts in the MW - approx 50 m2 mechanical and chemical wood protection - approx 100 ST boring hole pressure truck of damaged woods - approx 36 m2 pressure injection masonry - Expose approx 20 m2 ceiling clothing ceiling plaster filling - Remove approx 20 m2 wall plaster - Remove and dispose of approx 100 m wooden components The scaffolding is advertised in a separate lot

Tender Bidding Type:

Click here for more details

Tender Notice No:

Click here for more details

Tender Document:

• 1 week to go
• 15 Days to go
• More than 15 days to go