Tender Summary
The Wałbrzych Commune - City with County Rights in Poland from Europe region had released this tender for 1. The subject of the contract is the preparation of design and cost estimate documentation constituting the basis for the description and execution of the subject of the public procurement contract concerning the implementation of construction works for the investment project entitled "Reconstruction of Wieniawskiego Street (near St. Anne's Church) in Wałbrzych". 1) The scope of the task includes: a) obtaining a land registry map and a list of entities and plots, b) based on data obtained from the geodetic center, supported by a full inventory of the existing condition and verification of the foundations of the road infrastructure, including facilities not related to road traffic needs, preparation of a map for design purposes (if necessary). The map for design purposes, prepared by the Contractor, should be agreed upon and unconditionally confirmed by all administrators of underground utilities networks regarding the route and foundation of their networks, c) obtaining the necessary approvals and decisions regarding the implemented project, in particular: - a building permit or a certificate of no objection to the intention to carry out construction works, - a decision on the location of a public purpose investment or an extract from the local development plan, - obtaining the necessary approvals and decisions regarding the implemented project (ZUD, greenery inventories, permits from the Conservator of Monuments, environmental decisions, decisions on development conditions, water law, etc.). 2) Scope of the study: a) geological documentation, conducting a geotechnical analysis of the subsoil. Conducting a groundwater analysis for the foundation of structural layers, b) preparing documentation for the construction works report (divided by discipline) or a multi-discipline construction design (architectural and construction design, land development design, technical design) – if a building permit is required, c) preparing detailed designs, separately for each discipline, d) preparing STWiORB (Structural and Technical Design), e) preparing a permanent traffic management plan with its approval, f) preparing a bill of quantities, a valuation form, and an investor's cost estimate for all disciplines in a continuous tabular format – one table, divided by type of work (general section, road works, specialized works, etc., summary of the net/gross value of the entire task). The bill of quantities form for the valuation is subject to separate agreement and approval by the Ordering Party, g) obtaining any other necessary decisions, opinions, permits, and design conditions necessary to complete the subject of the contract, h) obtaining technical conditions and network security agreements from network operators or eliminating conflicts. 3) The Contractor will initiate and participate in coordination meetings (if necessary) to present the design work. Coordination meetings will be held (at the Client's office or via online messaging) on a date agreed upon with the Client.The Contractor will prepare a report on the arrangements made during the coordination meetings. The Ordering Party reserves the right to initiate such meetings on its own. The Contractor will promptly provide the Ordering Party with all relevant information that directly impacts the timeline and quality of the contract's completion using generally accepted and available methods (letter, email) that ensure the confirmation of the information provided. 4) The Contractor is obliged to: 1. cooperate with the Ordering Party in preparing opinions, assessments, and analyses regarding the task being developed for the needs of other institutions, 2. participate in the tender procedure to select the Construction Contractor by immediately preparing answers to bidders' questions regarding the design study, 3. provide authorial supervision during the implementation of the investment according to the design that is the subject of the contract, 4. refrain from using proper names in the design, and in addition, if the phrase "or equivalent" is used, the Contractor will provide technical parameters of an equivalent solution, 5. use the latest available technological solutions in the developed documentation, 6. the descriptive parts of the study will be prepared using a computer text editor compatible with MS Word, the bill of quantities and the offer cost estimate will also be provided in an electronic version in a data format compatible with MS Excel, 7. all documentation must be prepared in accordance with the applicable Public Procurement Law on the date of submission of the study. 8. Since the design documentation will be used to describe the subject of the construction works contract, the Contractor will prepare an additional electronic version of the study with personal data removed. Quantitative scope of the contract: a) Detailed designs – 5 copies for each discipline b) Approved permanent traffic management design – 5 copies c) Bills of quantities – 1 copy d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor's cost estimate – 1 copy. The quantitative scope of the design documentation was determined based on the assumption that the Contractor will provide the Ordering Party with 3 complete copies of the design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a portable CD/DVD in the following formats: doc., xls., pdf., dwg.The Contractor will immediately submit information to the Ordering Party using generally accepted and available methods (letter, email) ensuring the possibility of confirming the information provided. 4) The Contractor is obligated to: 1. cooperate with the Ordering Party in preparing opinions, assessments, and analyses regarding the project being developed for the needs of other institutions; 2. participate in the tender process to select a construction contractor by immediately preparing responses to bidders' questions regarding the design; 3. provide authorial supervision during the implementation of the investment according to the design that is the subject of the contract; 4. refrain from using proper names in the design; and if the phrase "or equivalent" is used, the Contractor will provide the technical parameters of an equivalent solution; 5. use the latest available technological solutions in the developed documentation; 6. the descriptive parts of the study will be prepared using a computer text editor compatible with MS Word; the bill of quantities and the bid cost estimate will also be provided in electronic form in a data format compatible with MS Excel; 7. all documentation must be prepared in accordance with the Public Procurement Law in force on the date of submission of the study. 8. Since the design documentation will be used to describe the subject of the construction works contract, the Contractor will prepare an additional electronic version of the study with personal data removed. Quantitative scope of the contract: a) Detailed designs – 5 copies for each discipline b) Approved permanent traffic management design – 5 copies c) Bills of quantities – 1 copy d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor's cost estimate – 1 copy. The quantitative scope of the design documentation was determined based on the assumption that the Contractor will provide the Ordering Party with 3 complete copies of the design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a portable CD/DVD in the following formats: doc., xls., pdf., dwg.The Contractor will immediately submit information to the Ordering Party using generally accepted and available methods (letter, email) ensuring the possibility of confirming the information provided. 4) The Contractor is obligated to: 1. cooperate with the Ordering Party in preparing opinions, assessments, and analyses regarding the project being developed for the needs of other institutions; 2. participate in the tender process to select a construction contractor by immediately preparing responses to bidders' questions regarding the design; 3. provide authorial supervision during the implementation of the investment according to the design that is the subject of the contract; 4. refrain from using proper names in the design; and if the phrase "or equivalent" is used, the Contractor will provide the technical parameters of an equivalent solution; 5. use the latest available technological solutions in the developed documentation; 6. the descriptive parts of the study will be prepared using a computer text editor compatible with MS Word; the bill of quantities and the bid cost estimate will also be provided in electronic form in a data format compatible with MS Excel; 7. all documentation must be prepared in accordance with the Public Procurement Law in force on the date of submission of the study. 8. Since the design documentation will be used to describe the subject of the construction works contract, the Contractor will prepare an additional electronic version of the study with personal data removed. Quantitative scope of the contract: a) Detailed designs – 5 copies for each discipline b) Approved permanent traffic management design – 5 copies c) Bills of quantities – 1 copy d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor's cost estimate – 1 copy. The quantitative scope of the design documentation was determined based on the assumption that the Contractor will provide the Ordering Party with 3 complete copies of the design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a portable CD/DVD in the following formats: doc., xls., pdf., dwg.3. authorial supervision during the implementation of the investment according to the design that is the subject of the contract; 4. not using proper names in the design; and if the phrase "or equivalent" is used, the Contractor will provide the technical parameters of an equivalent solution; 5. using the latest available technological solutions in the developed documentation; 6. the descriptive parts of the study will be prepared using a computer text editor compatible with MS Word; the bill of quantities and the bid cost estimate will also be provided in an electronic version in a data format compatible with MS Excel; 7. all documentation must be prepared in accordance with the applicable Public Procurement Law as of the date of submission of the study. 8. because the design documentation will be used to describe the subject of the construction works contract, the Contractor will prepare an additional electronic version of the study with personal data removed. Quantitative scope of the order: a) Detailed designs – 5 copies for each discipline b) Approved permanent traffic management design – 5 copies c) Bills of quantities – 1 copy of each d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor's cost estimate – 1 copy. The quantitative scope of design studies was determined assuming that the Contractor will provide the Ordering Party with 3 complete copies of design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a CD/DVD in the following formats: doc., xls., pdf., or dwg.3. authorial supervision during the implementation of the investment according to the design that is the subject of the contract; 4. not using proper names in the design; and if the phrase "or equivalent" is used, the Contractor will provide the technical parameters of an equivalent solution; 5. using the latest available technological solutions in the developed documentation; 6. the descriptive parts of the study will be prepared using a computer text editor compatible with MS Word; the bill of quantities and the bid cost estimate will also be provided in an electronic version in a data format compatible with MS Excel; 7. all documentation must be prepared in accordance with the applicable Public Procurement Law as of the date of submission of the study. 8. because the design documentation will be used to describe the subject of the construction works contract, the Contractor will prepare an additional electronic version of the study with personal data removed. Quantitative scope of the order: a) Detailed designs – 5 copies for each discipline b) Approved permanent traffic management design – 5 copies c) Bills of quantities – 1 copy of each d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor's cost estimate – 1 copy. The quantitative scope of design studies was determined assuming that the Contractor will provide the Ordering Party with 3 complete copies of design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a CD/DVD in the following formats: doc., xls., pdf., or dwg.for each sector b) Approved permanent traffic organization design – 5 copies c) Bills of quantities – 1 copy of each d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor cost estimate – 1 copy The quantitative scope of design studies was determined assuming that the Contractor will provide the Ordering Party with 3 complete copies of design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include, within its scope, the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a CD/DVD in the following formats: doc., xls., pdf., dwg.for each sector b) Approved permanent traffic organization design – 5 copies c) Bills of quantities – 1 copy of each d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor cost estimate – 1 copy The quantitative scope of design studies was determined assuming that the Contractor will provide the Ordering Party with 3 complete copies of design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include, within its scope, the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a CD/DVD in the following formats: doc., xls., pdf., dwg. with tender notice no. 677930-2026 published on 07 Oct 2026. The tender expired on 04 Nov 2026. This tender is sourced from TED Europa and is eligible for suppliers interested in Engineering design services. Interested bidders can obtain further information including complete bid documents or ways to participate by registering on Tender Impulse and referencing via Tender Impulse ID 15301086.
Tender Details
Tender NoticeTI Ref: 15301086
Tender Notice No
677930-2026
Tender Organisation
Wałbrzych Commune - City with County Rights
Tender CPV
71320000 : Engineering design services
Tender Document Type
Competition
Tender Deadline
04 Nov 2026 Deadline passed
Tender Description
1. The subject of the contract is the preparation of design and cost estimate documentation constituting the basis for the description and execution of the subject of the public procurement contract concerning the implementation of construction works for the investment project entitled "Reconstruction of Wieniawskiego Street (near St. Anne's Church) in Wałbrzych". 1) The scope of the task includes: a) obtaining a land registry map and a list of entities and plots, b) based on data obtained from the geodetic center, supported by a full inventory of the existing condition and verification of the foundations of the road infrastructure, including facilities not related to road traffic needs, preparation of a map for design purposes (if necessary). The map for design purposes, prepared by the Contractor, should be agreed upon and unconditionally confirmed by all administrators of underground utilities networks regarding the route and foundation of their networks, c) obtaining the necessary approvals and decisions regarding the implemented project, in particular: - a building permit or a certificate of no objection to the intention to carry out construction works, - a decision on the location of a public purpose investment or an extract from the local development plan, - obtaining the necessary approvals and decisions regarding the implemented project (ZUD, greenery inventories, permits from the Conservator of Monuments, environmental decisions, decisions on development conditions, water law, etc.). 2) Scope of the study: a) geological documentation, conducting a geotechnical analysis of the subsoil. Conducting a groundwater analysis for the foundation of structural layers, b) preparing documentation for the construction works report (divided by discipline) or a multi-discipline construction design (architectural and construction design, land development design, technical design) – if a building permit is required, c) preparing detailed designs, separately for each discipline, d) preparing STWiORB (Structural and Technical Design), e) preparing a permanent traffic management plan with its approval, f) preparing a bill of quantities, a valuation form, and an investor's cost estimate for all disciplines in a continuous tabular format – one table, divided by type of work (general section, road works, specialized works, etc., summary of the net/gross value of the entire task). The bill of quantities form for the valuation is subject to separate agreement and approval by the Ordering Party, g) obtaining any other necessary decisions, opinions, permits, and design conditions necessary to complete the subject of the contract, h) obtaining technical conditions and network security agreements from network operators or eliminating conflicts. 3) The Contractor will initiate and participate in coordination meetings (if necessary) to present the design work. Coordination meetings will be held (at the Client's office or via online messaging) on a date agreed upon with the Client.The Contractor will prepare a report on the arrangements made during the coordination meetings. The Ordering Party reserves the right to initiate such meetings on its own. The Contractor will promptly provide the Ordering Party with all relevant information that directly impacts the timeline and quality of the contract's completion using generally accepted and available methods (letter, email) that ensure the confirmation of the information provided. 4) The Contractor is obliged to: 1. cooperate with the Ordering Party in preparing opinions, assessments, and analyses regarding the task being developed for the needs of other institutions, 2. participate in the tender procedure to select the Construction Contractor by immediately preparing answers to bidders' questions regarding the design study, 3. provide authorial supervision during the implementation of the investment according to the design that is the subject of the contract, 4. refrain from using proper names in the design, and in addition, if the phrase "or equivalent" is used, the Contractor will provide technical parameters of an equivalent solution, 5. use the latest available technological solutions in the developed documentation, 6. the descriptive parts of the study will be prepared using a computer text editor compatible with MS Word, the bill of quantities and the offer cost estimate will also be provided in an electronic version in a data format compatible with MS Excel, 7. all documentation must be prepared in accordance with the applicable Public Procurement Law on the date of submission of the study. 8. Since the design documentation will be used to describe the subject of the construction works contract, the Contractor will prepare an additional electronic version of the study with personal data removed. Quantitative scope of the contract: a) Detailed designs – 5 copies for each discipline b) Approved permanent traffic management design – 5 copies c) Bills of quantities – 1 copy d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor's cost estimate – 1 copy. The quantitative scope of the design documentation was determined based on the assumption that the Contractor will provide the Ordering Party with 3 complete copies of the design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a portable CD/DVD in the following formats: doc., xls., pdf., dwg.The Contractor will immediately submit information to the Ordering Party using generally accepted and available methods (letter, email) ensuring the possibility of confirming the information provided. 4) The Contractor is obligated to: 1. cooperate with the Ordering Party in preparing opinions, assessments, and analyses regarding the project being developed for the needs of other institutions; 2. participate in the tender process to select a construction contractor by immediately preparing responses to bidders' questions regarding the design; 3. provide authorial supervision during the implementation of the investment according to the design that is the subject of the contract; 4. refrain from using proper names in the design; and if the phrase "or equivalent" is used, the Contractor will provide the technical parameters of an equivalent solution; 5. use the latest available technological solutions in the developed documentation; 6. the descriptive parts of the study will be prepared using a computer text editor compatible with MS Word; the bill of quantities and the bid cost estimate will also be provided in electronic form in a data format compatible with MS Excel; 7. all documentation must be prepared in accordance with the Public Procurement Law in force on the date of submission of the study. 8. Since the design documentation will be used to describe the subject of the construction works contract, the Contractor will prepare an additional electronic version of the study with personal data removed. Quantitative scope of the contract: a) Detailed designs – 5 copies for each discipline b) Approved permanent traffic management design – 5 copies c) Bills of quantities – 1 copy d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor's cost estimate – 1 copy. The quantitative scope of the design documentation was determined based on the assumption that the Contractor will provide the Ordering Party with 3 complete copies of the design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a portable CD/DVD in the following formats: doc., xls., pdf., dwg.The Contractor will immediately submit information to the Ordering Party using generally accepted and available methods (letter, email) ensuring the possibility of confirming the information provided. 4) The Contractor is obligated to: 1. cooperate with the Ordering Party in preparing opinions, assessments, and analyses regarding the project being developed for the needs of other institutions; 2. participate in the tender process to select a construction contractor by immediately preparing responses to bidders' questions regarding the design; 3. provide authorial supervision during the implementation of the investment according to the design that is the subject of the contract; 4. refrain from using proper names in the design; and if the phrase "or equivalent" is used, the Contractor will provide the technical parameters of an equivalent solution; 5. use the latest available technological solutions in the developed documentation; 6. the descriptive parts of the study will be prepared using a computer text editor compatible with MS Word; the bill of quantities and the bid cost estimate will also be provided in electronic form in a data format compatible with MS Excel; 7. all documentation must be prepared in accordance with the Public Procurement Law in force on the date of submission of the study. 8. Since the design documentation will be used to describe the subject of the construction works contract, the Contractor will prepare an additional electronic version of the study with personal data removed. Quantitative scope of the contract: a) Detailed designs – 5 copies for each discipline b) Approved permanent traffic management design – 5 copies c) Bills of quantities – 1 copy d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor's cost estimate – 1 copy. The quantitative scope of the design documentation was determined based on the assumption that the Contractor will provide the Ordering Party with 3 complete copies of the design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a portable CD/DVD in the following formats: doc., xls., pdf., dwg.3. authorial supervision during the implementation of the investment according to the design that is the subject of the contract; 4. not using proper names in the design; and if the phrase "or equivalent" is used, the Contractor will provide the technical parameters of an equivalent solution; 5. using the latest available technological solutions in the developed documentation; 6. the descriptive parts of the study will be prepared using a computer text editor compatible with MS Word; the bill of quantities and the bid cost estimate will also be provided in an electronic version in a data format compatible with MS Excel; 7. all documentation must be prepared in accordance with the applicable Public Procurement Law as of the date of submission of the study. 8. because the design documentation will be used to describe the subject of the construction works contract, the Contractor will prepare an additional electronic version of the study with personal data removed. Quantitative scope of the order: a) Detailed designs – 5 copies for each discipline b) Approved permanent traffic management design – 5 copies c) Bills of quantities – 1 copy of each d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor's cost estimate – 1 copy. The quantitative scope of design studies was determined assuming that the Contractor will provide the Ordering Party with 3 complete copies of design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a CD/DVD in the following formats: doc., xls., pdf., or dwg.3. authorial supervision during the implementation of the investment according to the design that is the subject of the contract; 4. not using proper names in the design; and if the phrase "or equivalent" is used, the Contractor will provide the technical parameters of an equivalent solution; 5. using the latest available technological solutions in the developed documentation; 6. the descriptive parts of the study will be prepared using a computer text editor compatible with MS Word; the bill of quantities and the bid cost estimate will also be provided in an electronic version in a data format compatible with MS Excel; 7. all documentation must be prepared in accordance with the applicable Public Procurement Law as of the date of submission of the study. 8. because the design documentation will be used to describe the subject of the construction works contract, the Contractor will prepare an additional electronic version of the study with personal data removed. Quantitative scope of the order: a) Detailed designs – 5 copies for each discipline b) Approved permanent traffic management design – 5 copies c) Bills of quantities – 1 copy of each d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor's cost estimate – 1 copy. The quantitative scope of design studies was determined assuming that the Contractor will provide the Ordering Party with 3 complete copies of design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a CD/DVD in the following formats: doc., xls., pdf., or dwg.for each sector b) Approved permanent traffic organization design – 5 copies c) Bills of quantities – 1 copy of each d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor cost estimate – 1 copy The quantitative scope of design studies was determined assuming that the Contractor will provide the Ordering Party with 3 complete copies of design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include, within its scope, the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a CD/DVD in the following formats: doc., xls., pdf., dwg.for each sector b) Approved permanent traffic organization design – 5 copies c) Bills of quantities – 1 copy of each d) Collective quote form – 1 copy e) STWiORB technical specifications (multi-discipline) – 3 copies f) Investor cost estimate – 1 copy The quantitative scope of design studies was determined assuming that the Contractor will provide the Ordering Party with 3 complete copies of design documentation, including one set approved by the authority accepting the notification of construction works or issuing the building permit. The remaining 2 copies will be retained for the authority issuing the administrative decision. The Contractor will include, within its scope, the execution of designs in as many copies as will ensure the required opinions and approvals are obtained. All design documentation should also be attached on a CD/DVD in the following formats: doc., xls., pdf., dwg.
Frequently Asked Questions About This Tender
Who has issued this tender, and what is it for?
The tender has been issued by Wabrzych Commune - City with County Rights in Poland. Such a type of tender falls under Engineering design services, within the Education & Training sector, and is listed on Tender Impulse under notice number 677930-2026.
What are the key dates for this tender?
The notice was published on 07 Oct 2026 and submissions close on 04 Nov 2026. Late bids are rarely accepted in public procurement, so aim to have your documents ready several days before the closing date.
Which CPV codes apply to this tender?
It is classified under CPV codes 71320000, which correspond to Engineering design services. If your company supplies these products or services, these are the codes to save in your alert profile so no matching tender passes you by.
Can I submit my bid for this tender to Tender Impulse?
No - and this matters. Tender Impulse is a tender aggregation and alert service: we collect procurement notices from official sources around the world and list them in one place. We do not receive, forward or evaluate bids. Your bid for this tender must be submitted directly to Wabrzych Commune - City with County Rights, using the method described in the original tender document, before 04 Nov 2026. Tender Impulse provides complete assistance in submitting all bids posted on its website.
How do I get the bid documents and participation details?
Request a live demo on Tender Impulse and our tender experts will walk you through this listing, share the available documents, and explain how to submit your bid to Wabrzych Commune - City with County Rights. Subscribers also receive help with registration requirements and, where needed, translation of non-English notices - but the submission itself always goes from you to the buyer.
How can I find more tenders like this in Poland?
There are currently 23599 live tenders of 574097 total tenders from Poland on Tender Impulse. You can browse them on our Poland tenders page, or save a search combining Poland with CPV codes 71320000 - we will then email you every new match on the day it is published.
How to prepare for this bid?
Suppliers must verify technical specifications, the delivery schedules and any other intrinsic details as provided in the complete bid documents before deciding to submit their bids. All necessary certifications and supplier registrations must be undertaken before participation.
Is this tender beneficial for me?
The procurement is applicable to companies in the Engineering design services and related industries. If you belong to this industry, you can review the technical documents before assessing your relevance to your company.
What is the procurement trend for Preparation of design and cost estimate documentation constituting the basis for the description and execution of the subject of the public procurement contract concerning the implementation of construction works for the investment project entitled Reconstruction of Wieniawskiego Street (near St. Annes Church) in Wabrzych?
The public procurement trends for Preparation of design and cost estimate documentation constituting the basis for the description and execution of the subject of the public procurement contract concerning the implementation of construction works for the investment project entitled Reconstruction of Wieniawskiego Street (near St. Annes Church) in Wabrzych can be assessed by viewing historical data and buying patterns for this product. Subscribed members can view and even download reports of tenders released in the past for their market research. This shall allow them to carefully prepare a compelling bid.
Explore More Engineering design services Tenders in Poland, Europe Region and Worldwide
Looking for more tenders like this one in Engineering design services? With millions of global procurement opportunities and new tenders added daily, Tender Impulse is your gateway to international and local contracting success. Whether you're targeting the Education & Training sector in Poland, or expanding across regions, we provide live, accurate and relevant updates every day.
Our platform sources tenders from national and local government portals, international development and funding agencies, municipal corporations, state authorities, NGOs, education ministries and public-private partnerships.
Daily Tender Updates Across 190+ Countries
Every day we add hundreds of new RFPs, RFQs, EOIs and contract awards across multiple sectors and geographies. This tender from Poland is just a sample of what's available right now - there are currently 23,599 live Poland tenders to explore.
Search Smarter with CPV and Industry Matching
Each listing is categorised using CPV codes such as 71320000, enabling precise filtering by tender type, location, industry, deadline and issuing organisation.
Start Your Tender Journey
Request a free live demo to unlock tenders customised to your sector, country and CPV categories - with alerts, documents and submission support.