Purchase and delivery of a basket lift on a truck-mounted chassis

The Gmina i Miasto Czerwionka-Leszczyny in Poland from Europe region has released this tender for 1. The subject of the order is the purchase and delivery of a basket lift on a truck chassis. 2. The subject of the order includes: I. Purchase and delivery of a telescopic basket lift built on a truck chassis meeting the following requirements/technical parameters: 1) Lift (telescope): 1. working lifting height: min. 32m – 35m 2. lateral outreach: minimum 20m 3. telescopic structure terminated with an additional JIB arm 4. tower rotation min. 360 degrees, 5. steel structure - the lift is not made of aluminum, 6. manual hydraulic pump for emergency lowering of the basket enabling the lift to be folded into the transport position, 7. safety valves on the cylinders, 8. control possible from the basket and the ground 9. automatic folding function of the device with supports 10. telemetry equipment enabling remote monitoring of the device’s parameters. 2) Basket: 1. The mounting should enable the basket to be lowered as close as possible to the surface of the flat roof – maximum distance 20 cm. 2. minimum basket load capacity 320 kg, 3. basket rotation in both directions min. 90 – 90 degrees 4. two-person, frame, 5. aluminum sides, 6. overload protection system, 7. 230V socket in the basket 3) Chassis: 1. possibility of correct distribution of supports and leveling of the device 2. manual or automatic gearbox 3. 4x2 or 4x4 drive 4. power: min. 150 HP 5. permissible total weight: max. 18 t 6. Cabin: min. 2-seater 7. hydraulically extendable front and rear outriggers, 8. optional outrigger deployment system 9. 4 outrigger sleepers 10. warning light on the cab, 11. operating hour meter, II. Delivery to the Ordering Party of a vehicle in accordance with the Ordering Party's requirements specified in the Technical Specifications, i.e.: - the vehicle must meet the technical conditions and conditions for admission to road traffic in the Republic of Poland, have all documents confirming such admission, including tests, technical approvals, required homologations, UDT inspection, and be ready for registration. - The Ordering Party requires that the delivered vehicle be brand new, manufactured in 2025 or 2026, free from physical defects (including design, materials, workmanship, technical), legal defects, encumbrances and claims in favor of third parties, free from restrictions on its disposal, and that it has not been the subject of any administrative or civil proceedings, nor has it been subject to any other security or seizure. - The Ordering Party does not allow the subject of the Agreement to originate from a country other than a Member State of the European Union, a country of the European Economic Area, a state party to the Government Procurement Agreement (GPA) concluded within the framework of the World Trade Organization or a state party to an agreement concluded with the European Union regulating mutual access to public procurement; - the vehicle may not contain an ICT product, ICT service or ICT process indicated in the recommendation referred to in Art. 33 sec.4 of the Act of 5 July 2018 on the national cybersecurity system (Journal of Laws of 2026, items 20 and 252), stating their negative impact on the fundamental interest of state security; the vehicle may not contain an ICT product, the type of which was specified in the decision on recognizing the supplier as a high-risk supplier, referred to in Art. 67b, paragraph 15 of the Act of 5 July 2018 on the national cybersecurity system, or an ICT service, or ICT process, specified in that decision. III. Training of persons designated by the Ordering Party in theoretical and practical operation of the vehicle and issuing to the trained persons certificates confirming completion of the training on the day of delivery. 3. The Ordering Party indicates the following requirements for the performance of the order: 1) delivery of the subject of the order to the place indicated by the Ordering Party at the Contractor's expense and risk, together with training of the Ordering Party's personnel in its operation on the day of delivery; 2) The Contractor is responsible for securing the delivered equipment until a written, fault-free acceptance of the subject of the contract has been confirmed by the responsible persons on the Ordering Party's side. 3) The subject of the contract must meet all quality requirements and technical parameters required by the Ordering Party in this ToR and must be marketed within the European Union in accordance with applicable regulations. If the subject of the contract fails to meet the requirements specified above, the Ordering Party will reject the Contractor's offer. 4) The Contractor will provide the Ordering Party with the ability to perform maintenance, technical, and annual inspections within the Silesian Voivodeship without losing warranty rights under the contract, or will provide remote/mobile service in this regard, enabling the Ordering Party to fulfill its obligation to perform the aforementioned inspections without the need to deliver a vehicle to the Contractor. 4. The Contractor to whom the contract is awarded will provide the Ordering Party with a warranty for the subject of the contract, which will cover at least 24 months from the date of the fault-free final acceptance protocol. The warranty will cover the vehicle and the entire lift assembly. The warranty period provided by the Contractor will be the same for the entire subject of the contract. The warranty period will be equal to the guarantee period. The warranty period is a criterion for evaluating offers. 5. Other information is in accordance with the tender specifications.Training of persons designated by the Ordering Party in theoretical and practical operation of the vehicle, and issuing certificates to the trained persons confirming completion of the training on the day of delivery. 3. The Ordering Party indicates the following requirements for the execution of the order: 1) delivery of the subject of the order to the location indicated by the Ordering Party at the Contractor's expense and risk, along with training of the Ordering Party's personnel in its operation on the day of delivery; 2) The Contractor is responsible for securing the delivered equipment until written, fault-free acceptance of the subject of the contract, confirmed by the responsible persons on the Ordering Party's side. 3) The subject of the order must meet all quality requirements and technical parameters required by the Ordering Party in these ToR and must be marketed in the European Union in accordance with applicable regulations. If the subject of the order fails to meet the requirements specified above, the Ordering Party will reject the Contractor's offer. 4) The Contractor will provide the Ordering Party with the ability to perform maintenance, technical, and annual inspections within the Silesian Voivodeship without losing warranty rights under the contract, or will provide remote/mobile service in this regard, enabling the Ordering Party to fulfill its obligation to perform the aforementioned inspections without the need to deliver the vehicle to the Contractor. 4. The Contractor to whom the contract is awarded will provide the Ordering Party with a warranty for the subject of the contract, which will cover at least 24 months from the date of the fault-free final acceptance protocol. The warranty will cover the vehicle and the entire lift assembly. The warranty period granted by the Contractor will be the same for the entire subject of the contract. The warranty period will be equal to the warranty period. The warranty period provided is a criterion for the evaluation of offers. 5. Other information in accordance with the Technical SpecificationsTraining of persons designated by the Ordering Party in theoretical and practical operation of the vehicle, and issuing certificates to the trained persons confirming completion of the training on the day of delivery. 3. The Ordering Party indicates the following requirements for the execution of the order: 1) delivery of the subject of the order to the location indicated by the Ordering Party at the Contractor's expense and risk, along with training of the Ordering Party's personnel in its operation on the day of delivery; 2) The Contractor is responsible for securing the delivered equipment until written, fault-free acceptance of the subject of the contract, confirmed by the responsible persons on the Ordering Party's side. 3) The subject of the order must meet all quality requirements and technical parameters required by the Ordering Party in these ToR and must be marketed in the European Union in accordance with applicable regulations. If the subject of the order fails to meet the requirements specified above, the Ordering Party will reject the Contractor's offer. 4) The Contractor will provide the Ordering Party with the ability to perform maintenance, technical, and annual inspections within the Silesian Voivodeship without losing warranty rights under the contract, or will provide remote/mobile service in this regard, enabling the Ordering Party to fulfill its obligation to perform the aforementioned inspections without the need to deliver the vehicle to the Contractor. 4. The Contractor to whom the contract is awarded will provide the Ordering Party with a warranty for the subject of the contract, which will cover at least 24 months from the date of the fault-free final acceptance protocol. The warranty will cover the vehicle and the entire lift assembly. The warranty period granted by the Contractor will be the same for the entire subject of the contract. The warranty period will be equal to the warranty period. The warranty period provided is a criterion for the evaluation of offers. 5. Other information in accordance with the Technical Specifications4) The Contractor will provide the Ordering Party with the ability to perform maintenance, technical, and annual inspections within the Silesian Voivodeship without losing warranty rights under the contract, or will provide remote/mobile service in this regard, enabling the Ordering Party to fulfill its obligation to perform the aforementioned inspections without the need to deliver the vehicle to the Contractor. 4. The Contractor to whom the contract is awarded will provide the Ordering Party with a warranty for the subject of the contract, which will cover at least 24 months from the date of the fault-free final acceptance protocol. The warranty will cover the vehicle and the entire lift assembly. The warranty period granted by the Contractor will be the same for the entire subject of the contract. The warranty period will be equal to the warranty period. The warranty period provided is a criterion for the evaluation of offers. 5. Other information in accordance with the Technical Specifications4) The Contractor will provide the Ordering Party with the ability to perform maintenance, technical, and annual inspections within the Silesian Voivodeship without losing warranty rights under the contract, or will provide remote/mobile service in this regard, enabling the Ordering Party to fulfill its obligation to perform the aforementioned inspections without the need to deliver the vehicle to the Contractor. 4. The Contractor to whom the contract is awarded will provide the Ordering Party with a warranty for the subject of the contract, which will cover at least 24 months from the date of the fault-free final acceptance protocol. The warranty will cover the vehicle and the entire lift assembly. The warranty period granted by the Contractor will be the same for the entire subject of the contract. The warranty period will be equal to the warranty period. The warranty period provided is a criterion for the evaluation of offers. 5. Other information in accordance with the Technical Specifications with tender notice no. 681106-2026 published on 07 Oct 2026. The tender is due to expire on 02 Nov 2026. This tender is sourced from TED Europa and is eligible for suppliers interested in Bucket-type, continuous-action elevators or conveyors. Interested bidders can obtain further information including complete bid documents or ways to participate by registering on Tender Impulse and referencing via Tender Impulse ID 15302077.