Tender Summary
The Technical University of Denmark - DTU in Denmark from Europe region has released this tender for DTU requires the acquisition of one complete eddy covariance measurement station for continuous, long-term monitoring of exchanges of carbon dioxide (CO₂), methane (CH₄), water vapour, heat, and momentum between an apple orchard and the atmosphere. The system will be used for research on climate impacts, greenhouse gas balances, carbon sequestration, water use, and sustainable agricultural production. The acquisition comprises a fully integrated field measurement station capable of operating autonomously under outdoor conditions throughout the year and generating high-frequency measurements suitable for eddy covariance flux calculations. The acquisition includes: • 1 three-dimensional sonic anemometer for high-frequency measurement of wind speed and wind direction. • 1 open-path carbon dioxide and water vapor analyzer for continuous measurement of atmospheric CO₂ and H₂O concentrations. • 1 open-path methane analyzer for continuous measurement of atmospheric CH₄ concentrations. • 1 integrated data acquisition, processing, storage, and communication system for synchronization, logging, quality control, and transfer of measurement data. • 1 meteorological measurement package comprising sensors for air temperature, relative humidity, precipitation, solar radiation, photosynthetically active radiation (PAR), net radiation, soil moisture, soil temperature, and soil heat flux. • 1 backup power and data retention system to ensure continued operation and prevent data loss during temporary interruptions. • 1 software package for data processing, quality assurance, visualization, footprint analysis, gap filling, and management of eddy covariance data. • 1 galvanized lattice measurement tower with a height of approximately 12 m, including foundation, mounting hardware, transport, and installation. The tower is required to position sensors above the orchard canopy and provide safe access for installation and maintenance. • 1 solar power system comprising photovoltaic panels, batteries, charge controller, mounting hardware, cabling, and associated electrical components required for autonomous operation at a field site without permanent grid connection. • All cables, communication equipment, sensor mounts, brackets, connectors, and accessories required for a complete operational system. DTU requires a complete Eddy Covariance system for continuous measurement of ecosystem atmosphere exchanges of carbon dioxide (CO₂), water vapor (H₂O), methane (CH₄) and energy in an experimental apple orchard. The system must provide high-frequency measurements, robust long-term field operation, standardized data processing and compatibility with established international flux research infrastructures. A market assessment was performed to identify suppliers capable of delivering a complete Eddy Covariance solution that meets the scientific and technical requirements of the project. Suppliers investigated included LI-COR Biosciences, Campbell Scientific, Picarro and Los Gatos Research. Several suppliers can provide systems for CO₂ and H₂O flux measurements. However, LI-COR is the only supplier identified that can provide the required integrated Eddy Covariance platform including an open-path methane analyser, synchronized measurement architecture, integrated real-time flux processing and established compatibility with major international flux monitoring networks. The proposed system includes the LI-7700 open-path methane analyzer integrated with the LI-7900 EddyFlux platform. According to the supplier documentation, LI-COR is the only supplier offering an open-path methane Eddy Covariance system with extensive field validation and long-term scientific use. The system further provides microsecond-level synchronization of instruments through Precision Time Protocol (PTP) and GPS-based clock control, which are essential for accurate flux calculations and data consistency. The system includes EddyPro, a widely adopted Eddy Covariance processing software used by international research infrastructures and flux networks, including ICOS. The software environment, data handling capabilities and compatibility with established network requirements are essential for ensuring data quality, comparability and long-term usability of the measurements generated within the project. The Eddy Covariance tower will be installed as temporary research infrastructure and will be dismantled and relocated to other research sites upon completion of the project. The tower and instrumentation therefore constitute reusable scientific infrastructure. Based on the market assessment, no reasonable alternative supplier was identified that could provide an equivalent integrated solution meeting all technical requirements for open-path methane Eddy Covariance measurements, synchronization, processing and compatibility with international flux research infrastructures and DTU therefore intends to award the contract to LI-COR Biosciences GmbH. with tender notice no. 656036-2026 published on 24 Sep 2026. The tender is due to expire on 23 Dec 2026. This tender is sourced from TED Europa and is eligible for suppliers interested in Surveying, hydrographic, oceanographic and hydrological instruments and appliances. Interested bidders can obtain further information including complete bid documents or ways to participate by registering on Tender Impulse and referencing via Tender Impulse ID 14956089.
Tender Details
Tender NoticeTI Ref: 14956089
Tender Notice No
656036-2026
Tender Organisation
Technical University of Denmark - DTU
Tender CPV
38290000 : Surveying, hydrographic, oceanographic and hydrological instruments and appliances
Tender Document Type
Tender Notice
Tender Deadline
23 Dec 2026 74 days left
Tender Description
DTU requires the acquisition of one complete eddy covariance measurement station for continuous, long-term monitoring of exchanges of carbon dioxide (CO₂), methane (CH₄), water vapour, heat, and momentum between an apple orchard and the atmosphere. The system will be used for research on climate impacts, greenhouse gas balances, carbon sequestration, water use, and sustainable agricultural production. The acquisition comprises a fully integrated field measurement station capable of operating autonomously under outdoor conditions throughout the year and generating high-frequency measurements suitable for eddy covariance flux calculations. The acquisition includes: • 1 three-dimensional sonic anemometer for high-frequency measurement of wind speed and wind direction. • 1 open-path carbon dioxide and water vapor analyzer for continuous measurement of atmospheric CO₂ and H₂O concentrations. • 1 open-path methane analyzer for continuous measurement of atmospheric CH₄ concentrations. • 1 integrated data acquisition, processing, storage, and communication system for synchronization, logging, quality control, and transfer of measurement data. • 1 meteorological measurement package comprising sensors for air temperature, relative humidity, precipitation, solar radiation, photosynthetically active radiation (PAR), net radiation, soil moisture, soil temperature, and soil heat flux. • 1 backup power and data retention system to ensure continued operation and prevent data loss during temporary interruptions. • 1 software package for data processing, quality assurance, visualization, footprint analysis, gap filling, and management of eddy covariance data. • 1 galvanized lattice measurement tower with a height of approximately 12 m, including foundation, mounting hardware, transport, and installation. The tower is required to position sensors above the orchard canopy and provide safe access for installation and maintenance. • 1 solar power system comprising photovoltaic panels, batteries, charge controller, mounting hardware, cabling, and associated electrical components required for autonomous operation at a field site without permanent grid connection. • All cables, communication equipment, sensor mounts, brackets, connectors, and accessories required for a complete operational system. DTU requires a complete Eddy Covariance system for continuous measurement of ecosystem atmosphere exchanges of carbon dioxide (CO₂), water vapor (H₂O), methane (CH₄) and energy in an experimental apple orchard. The system must provide high-frequency measurements, robust long-term field operation, standardized data processing and compatibility with established international flux research infrastructures. A market assessment was performed to identify suppliers capable of delivering a complete Eddy Covariance solution that meets the scientific and technical requirements of the project. Suppliers investigated included LI-COR Biosciences, Campbell Scientific, Picarro and Los Gatos Research. Several suppliers can provide systems for CO₂ and H₂O flux measurements. However, LI-COR is the only supplier identified that can provide the required integrated Eddy Covariance platform including an open-path methane analyser, synchronized measurement architecture, integrated real-time flux processing and established compatibility with major international flux monitoring networks. The proposed system includes the LI-7700 open-path methane analyzer integrated with the LI-7900 EddyFlux platform. According to the supplier documentation, LI-COR is the only supplier offering an open-path methane Eddy Covariance system with extensive field validation and long-term scientific use. The system further provides microsecond-level synchronization of instruments through Precision Time Protocol (PTP) and GPS-based clock control, which are essential for accurate flux calculations and data consistency. The system includes EddyPro, a widely adopted Eddy Covariance processing software used by international research infrastructures and flux networks, including ICOS. The software environment, data handling capabilities and compatibility with established network requirements are essential for ensuring data quality, comparability and long-term usability of the measurements generated within the project. The Eddy Covariance tower will be installed as temporary research infrastructure and will be dismantled and relocated to other research sites upon completion of the project. The tower and instrumentation therefore constitute reusable scientific infrastructure. Based on the market assessment, no reasonable alternative supplier was identified that could provide an equivalent integrated solution meeting all technical requirements for open-path methane Eddy Covariance measurements, synchronization, processing and compatibility with international flux research infrastructures and DTU therefore intends to award the contract to LI-COR Biosciences GmbH.
Frequently Asked Questions About This Tender
Who has issued this tender, and what is it for?
The tender has been issued by Technical University of Denmark - DTU in Denmark. Such a type of tender falls under Surveying, hydrographic, oceanographic and hydrological instruments and appliances, within the Infrastructure and construction sector, and is listed on Tender Impulse under notice number 656036-2026.
What are the key dates for this tender?
The notice was published on 24 Sep 2026 and submissions close on 23 Dec 2026. Late bids are rarely accepted in public procurement, so aim to have your documents ready several days before the closing date.
Which CPV codes apply to this tender?
It is classified under CPV codes 38290000, which correspond to Surveying, hydrographic, oceanographic and hydrological instruments and appliances. If your company supplies these products or services, these are the codes to save in your alert profile so no matching tender passes you by.
Can I submit my bid for this tender to Tender Impulse?
No - and this matters. Tender Impulse is a tender aggregation and alert service: we collect procurement notices from official sources around the world and list them in one place. We do not receive, forward or evaluate bids. Your bid for this tender must be submitted directly to Technical University of Denmark - DTU, using the method described in the original tender document, before 23 Dec 2026. Tender Impulse provides complete assistance in submitting all bids posted on its website.
How do I get the bid documents and participation details?
Request a live demo on Tender Impulse and our tender experts will walk you through this listing, share the available documents, and explain how to submit your bid to Technical University of Denmark - DTU. Subscribers also receive help with registration requirements and, where needed, translation of non-English notices - but the submission itself always goes from you to the buyer.
How can I find more tenders like this in Denmark?
There are currently 1284 live tenders of 16542 total tenders from Denmark on Tender Impulse. You can browse them on our Denmark tenders page, or save a search combining Denmark with CPV codes 38290000 - we will then email you every new match on the day it is published.
How to prepare for this bid?
Suppliers must verify technical specifications, the delivery schedules and any other intrinsic details as provided in the complete bid documents before deciding to submit their bids. All necessary certifications and supplier registrations must be undertaken before participation.
Is this tender beneficial for me?
The procurement is applicable to companies in the Surveying, hydrographic, oceanographic and hydrological instruments and appliances and related industries. If you belong to this industry, you can review the technical documents before assessing your relevance to your company.
What is the procurement trend for Purchase of Eddy Covariance System for continuous measurements of CO, HO and CH fluxes?
The public procurement trends for Purchase of Eddy Covariance System for continuous measurements of CO, HO and CH fluxes can be assessed by viewing historical data and buying patterns for this product. Subscribed members can view and even download reports of tenders released in the past for their market research. This shall allow them to carefully prepare a compelling bid.
Explore More Surveying, hydrographic, oceanographic and hydrological instruments and appliances Tenders in Denmark, Europe Region and Worldwide
Looking for more tenders like this one in Surveying, hydrographic, oceanographic and hydrological instruments and appliances? With millions of global procurement opportunities and new tenders added daily, Tender Impulse is your gateway to international and local contracting success. Whether you're targeting the Infrastructure and construction sector in Denmark, or expanding across regions, we provide live, accurate and relevant updates every day.
Our platform sources tenders from national and local government portals, international development and funding agencies, municipal corporations, state authorities, NGOs, education ministries and public-private partnerships.
Daily Tender Updates Across 190+ Countries
Every day we add hundreds of new RFPs, RFQs, EOIs and contract awards across multiple sectors and geographies. This tender from Denmark is just a sample of what's available right now - there are currently 1,284 live Denmark tenders to explore.
Search Smarter with CPV and Industry Matching
Each listing is categorised using CPV codes such as 38290000, enabling precise filtering by tender type, location, industry, deadline and issuing organisation.
Start Your Tender Journey
Request a free live demo to unlock tenders customised to your sector, country and CPV categories - with alerts, documents and submission support.