Tender Summary
The THE DIGEST IN THE BROAD ÅVALLEY in Denmark from Europe region has released this tender for The Digelaget in Brede Ådalen ("Digelaget") is a local association responsible for the maintenance and protection of dikes along the Brede Å to prevent flooding of the adjacent agricultural areas and valley areas. The work of the Digelaget therefore most often consists of maintaining dike crests and slopes to ensure stability against water pressure. The Digelaget now wants to have the existing Ballum Dike reinforced with silt and sand on the stretch from the Rømø Dam and south to Vesterende, which totals approximately 7,500 meters. The work will also include excavation and formation of a lake area in connection with the extraction of the sand and silt deposits used for the Ballum Dike. Against this background, the Digelaget wants to enter into one construction contract ("the Contract") with one fixed contract price without the possibility of regulation in the event of quantity deviations. The contractor bears the quantity risk. The contract will mainly include the following works (the estimated quantities for each of the works below are stated in the tender list, which is part of the overall tender material): 1. Milling of the growth layer on the dike (on the slope, foreland and dike crest of the existing dike) 2. Excavation of growth layer and temporary deposit thereof on the slope, foreland, dike crest and on the back slope of the existing dike 3. Excavation from the existing dike, moving and incorporating raw soil into the dike 4. Excavation from the existing dike and disposal of raw soil into the dike 5. Excavation from the lakes, moving and incorporating silt 6. Re-laying of growth layer and grass seeding on the new dike profile. This will be supplemented by the delivery of growth layer soil from the lakes 7. The quantities of raw soil and silt required for the contract will be obtained by the contractor in connection with the excavation of new lakes close to the sub-project. The materials are transported to the dike and installed by the contractor. The lakes are kept dry by the contractor in connection with the excavation work 8. Completion of the lake banks and re-establishment of affected areas around the lakes 9. Fertilization and grass seeding of all affected areas All the areas where work is to be carried out are located at Ballum in Tønder Municipality. The silt that is to be used for the extension is delivered as a client delivery (estimated value is approximately DKK 15-16 million). The transport of the silt itself will be included in the works associated with the Contract. In addition, the Contract includes a minor supplementary purchase and delivery and laying of suitable stable gravel or crushed concrete for the maintenance of interim roads and work roads from the excavation site to the dike installation sites. The dike company cannot provide electricity, but can be helpful. The work on the dike construction itself must be carried out from March/April 2027 to October 2028 between 4:00 a.m. and 6:00 p.m., provided that this does not conflict with other regulations, including the permit from the Danish Coastal Directorate. In addition, it is expected thatthat the work at the excavation sites can be started approximately one month earlier, i.e. in February 2027. In the interests of dike safety, the contractor is obliged to pause the execution from October 2027 to February 2028, after which the work can be resumed. At the time of the publication of the tender, the Digelagat has not received a final permit from the Coastal Directorate for coastal protection, just as the Digelagat has not received a discharge and land zone permit from Tønder Municipality at this time. Against this background, the Digelagat therefore expressly reserves the right to cancel the tender if final permits are not obtained. The Digelagat also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagat expressly reserves the right to cancel the tender if the Digelagat does not receive the necessary financing from Tønder Municipality for the implementation of the project, just as the Digelagat in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Danish Construction Association has not divided the tendered construction contract into subcontracts, as the Danish Construction Association assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the consequent risk of increased transaction costs and risk exposure for the Danish Construction Association. In particular, the documents work description for workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthmoving contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the said standard or equivalent. If the tenderer does not meet the said standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done free of charge. Questions regarding www.udbuddet.dk should be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to carry out an inspection of the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender material.For reasons of dike safety, the contractor is obliged to pause the execution from October 2027 to February 2028, after which the work can be resumed. At the time of the publication of the tender, the Digelagat has not received a final permit from the Coastal Directorate for coastal protection, nor has the Digelagat received a discharge and land zone permit from Tønder Municipality at this time. Against this background, the Digelagat therefore expressly reserves the right to cancel the tender if final permits are not obtained. The Digelagat also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagat expressly reserves the right to cancel the tender if the Digelagat does not receive the necessary financing from Tønder Municipality for the implementation of the project, just as the Digelagat in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Danish Construction Association has not divided the tendered construction contract into subcontracts, as the Danish Construction Association assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the consequent risk of increased transaction costs and risk exposure for the Danish Construction Association. In particular, the documents work description for workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthmoving contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the said standard or equivalent. If the tenderer does not meet the said standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done free of charge. Questions regarding www.udbuddet.dk should be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to carry out an inspection of the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender material.For reasons of dike safety, the contractor is obliged to pause the execution from October 2027 to February 2028, after which the work can be resumed. At the time of the publication of the tender, the Digelagat has not received a final permit from the Coastal Directorate for coastal protection, nor has the Digelagat received a discharge and land zone permit from Tønder Municipality at this time. Against this background, the Digelagat therefore expressly reserves the right to cancel the tender if final permits are not obtained. The Digelagat also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagat expressly reserves the right to cancel the tender if the Digelagat does not receive the necessary financing from Tønder Municipality for the implementation of the project, just as the Digelagat in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Danish Construction Association has not divided the tendered construction contract into subcontracts, as the Danish Construction Association assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the consequent risk of increased transaction costs and risk exposure for the Danish Construction Association. In particular, the documents work description for workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthmoving contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the said standard or equivalent. If the tenderer does not meet the said standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done free of charge. Questions regarding www.udbuddet.dk should be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to carry out an inspection of the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender material.At the time of the publication of the tender, the Digelagat has not received a final permit from the Danish Coastal Directorate for coastal protection, nor has the Digelagat received a discharge or land zone permit from the Municipality of Tønder at this time. Against this background, the Digelagat therefore expressly reserves the right to cancel the tender if final permits are not obtained. The Digelagat also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagat expressly reserves the right to cancel the tender if the Digelagat does not receive the necessary financing from the Municipality of Tønder for the implementation of the project, just as the Digelagat in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Digelagat has not divided the tendered construction contract into subcontracts, as the Digelagat assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the resulting risk of increased transaction costs and risk exposure for the Digelagat. In particular, the documents job description for workplace, job description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthwork contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the mentioned standard or equivalent. If the tenderer does not meet the mentioned standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender will be carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done at no cost. Questions regarding www.udbuddet.dk must be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to inspect the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration is not adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender materials.At the time of the publication of the tender, the Digelagat has not received a final permit from the Danish Coastal Directorate for coastal protection, nor has the Digelagat received a discharge or land zone permit from the Municipality of Tønder at this time. Against this background, the Digelagat therefore expressly reserves the right to cancel the tender if final permits are not obtained. The Digelagat also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagat expressly reserves the right to cancel the tender if the Digelagat does not receive the necessary financing from the Municipality of Tønder for the implementation of the project, just as the Digelagat in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Digelagat has not divided the tendered construction contract into subcontracts, as the Digelagat assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the resulting risk of increased transaction costs and risk exposure for the Digelagat. In particular, the documents job description for workplace, job description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthwork contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the mentioned standard or equivalent. If the tenderer does not meet the mentioned standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender will be carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done at no cost. Questions regarding www.udbuddet.dk must be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to inspect the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration is not adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender materials.The Digelagaet also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagaet expressly reserves the right to cancel the tender if the Digelagaet does not receive the necessary financing from the Municipality of Tønder for the implementation of the project, just as the Digelagaet in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Digelagaet has not divided the tendered construction contract into subcontracts, as the Digelagaet assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the consequent risk of increased transaction costs and risk exposure for the Digelagaet. In particular, the documents work description for workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthmoving contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the said standard or equivalent. If the tenderer does not meet the mentioned standard, but is equivalent, the tenderer must document in the tender that the offered solution is equivalent to the relevant parameters. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done free of charge. Questions regarding www.udbuddet.dk must be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to inspect the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may turn out to be different during execution. Therefore, the Client can also make the 3D measurements that form the basis for the quantities in the tender list available as part of the tender materials.The Digelagaet also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagaet expressly reserves the right to cancel the tender if the Digelagaet does not receive the necessary financing from the Municipality of Tønder for the implementation of the project, just as the Digelagaet in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Digelagaet has not divided the tendered construction contract into subcontracts, as the Digelagaet assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the consequent risk of increased transaction costs and risk exposure for the Digelagaet. In particular, the documents work description for workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthmoving contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the said standard or equivalent. If the tenderer does not meet the mentioned standard, but is equivalent, the tenderer must document in the tender that the offered solution is equivalent to the relevant parameters. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done free of charge. Questions regarding www.udbuddet.dk must be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to inspect the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may turn out to be different during execution. Therefore, the Client can also make the 3D measurements that form the basis for the quantities in the tender list available as part of the tender materials.legal and practical interfaces with the resulting risk of increased transaction costs and risk exposure for the Digelaget. In particular, the documents work description for the workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthwork contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the mentioned standard or equivalent. If the tenderer does not meet the mentioned standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done at no cost. Questions regarding www.udbuddet.dk must be asked directly via the support function (tel. 70227007). No remuneration is paid for the tenderers participation in the tender process. The tenderers are encouraged to carry out an inspection of the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender materials.legal and practical interfaces with the resulting risk of increased transaction costs and risk exposure for the Digelaget. In particular, the documents work description for the workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthwork contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the mentioned standard or equivalent. If the tenderer does not meet the mentioned standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done at no cost. Questions regarding www.udbuddet.dk must be asked directly via the support function (tel. 70227007). No remuneration is paid for the tenderers participation in the tender process. The tenderers are encouraged to carry out an inspection of the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender materials.may turn out differently during execution. Therefore, the Client can also make the 3D measurements that form the basis for the quantities in the tender list available as part of the tender materials.may turn out differently during execution. Therefore, the Client can also make the 3D measurements that form the basis for the quantities in the tender list available as part of the tender materials. with tender notice no. 712699-2026 published on 15 Oct 2026. The tender is due to expire on 23 Nov 2026. This tender is sourced from TED Europa and is eligible for suppliers interested in Reinforced-concrete structures, Dam-reinforcement works, Reinforced-concrete work. Interested bidders can obtain further information including complete bid documents or ways to participate by registering on Tender Impulse and referencing via Tender Impulse ID 15552618.
Tender Details
Tender NoticeTI Ref: 15552618
Tender Notice No
712699-2026
Tender Organisation
THE DIGEST IN THE BROAD ÅVALLEY
Tender CPV
45223500 : Reinforced-concrete structures45247212 : Dam-reinforcement works45262310 : Reinforced-concrete work
Estimated Budget
55,000,000
Tender Document Type
Competition
Tender Deadline
23 Nov 2026 19 days left
Tender Description
The Digelaget in Brede Ådalen ("Digelaget") is a local association responsible for the maintenance and protection of dikes along the Brede Å to prevent flooding of the adjacent agricultural areas and valley areas. The work of the Digelaget therefore most often consists of maintaining dike crests and slopes to ensure stability against water pressure. The Digelaget now wants to have the existing Ballum Dike reinforced with silt and sand on the stretch from the Rømø Dam and south to Vesterende, which totals approximately 7,500 meters. The work will also include excavation and formation of a lake area in connection with the extraction of the sand and silt deposits used for the Ballum Dike. Against this background, the Digelaget wants to enter into one construction contract ("the Contract") with one fixed contract price without the possibility of regulation in the event of quantity deviations. The contractor bears the quantity risk. The contract will mainly include the following works (the estimated quantities for each of the works below are stated in the tender list, which is part of the overall tender material): 1. Milling of the growth layer on the dike (on the slope, foreland and dike crest of the existing dike) 2. Excavation of growth layer and temporary deposit thereof on the slope, foreland, dike crest and on the back slope of the existing dike 3. Excavation from the existing dike, moving and incorporating raw soil into the dike 4. Excavation from the existing dike and disposal of raw soil into the dike 5. Excavation from the lakes, moving and incorporating silt 6. Re-laying of growth layer and grass seeding on the new dike profile. This will be supplemented by the delivery of growth layer soil from the lakes 7. The quantities of raw soil and silt required for the contract will be obtained by the contractor in connection with the excavation of new lakes close to the sub-project. The materials are transported to the dike and installed by the contractor. The lakes are kept dry by the contractor in connection with the excavation work 8. Completion of the lake banks and re-establishment of affected areas around the lakes 9. Fertilization and grass seeding of all affected areas All the areas where work is to be carried out are located at Ballum in Tønder Municipality. The silt that is to be used for the extension is delivered as a client delivery (estimated value is approximately DKK 15-16 million). The transport of the silt itself will be included in the works associated with the Contract. In addition, the Contract includes a minor supplementary purchase and delivery and laying of suitable stable gravel or crushed concrete for the maintenance of interim roads and work roads from the excavation site to the dike installation sites. The dike company cannot provide electricity, but can be helpful. The work on the dike construction itself must be carried out from March/April 2027 to October 2028 between 4:00 a.m. and 6:00 p.m., provided that this does not conflict with other regulations, including the permit from the Danish Coastal Directorate. In addition, it is expected thatthat the work at the excavation sites can be started approximately one month earlier, i.e. in February 2027. In the interests of dike safety, the contractor is obliged to pause the execution from October 2027 to February 2028, after which the work can be resumed. At the time of the publication of the tender, the Digelagat has not received a final permit from the Coastal Directorate for coastal protection, just as the Digelagat has not received a discharge and land zone permit from Tønder Municipality at this time. Against this background, the Digelagat therefore expressly reserves the right to cancel the tender if final permits are not obtained. The Digelagat also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagat expressly reserves the right to cancel the tender if the Digelagat does not receive the necessary financing from Tønder Municipality for the implementation of the project, just as the Digelagat in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Danish Construction Association has not divided the tendered construction contract into subcontracts, as the Danish Construction Association assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the consequent risk of increased transaction costs and risk exposure for the Danish Construction Association. In particular, the documents work description for workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthmoving contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the said standard or equivalent. If the tenderer does not meet the said standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done free of charge. Questions regarding www.udbuddet.dk should be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to carry out an inspection of the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender material.For reasons of dike safety, the contractor is obliged to pause the execution from October 2027 to February 2028, after which the work can be resumed. At the time of the publication of the tender, the Digelagat has not received a final permit from the Coastal Directorate for coastal protection, nor has the Digelagat received a discharge and land zone permit from Tønder Municipality at this time. Against this background, the Digelagat therefore expressly reserves the right to cancel the tender if final permits are not obtained. The Digelagat also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagat expressly reserves the right to cancel the tender if the Digelagat does not receive the necessary financing from Tønder Municipality for the implementation of the project, just as the Digelagat in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Danish Construction Association has not divided the tendered construction contract into subcontracts, as the Danish Construction Association assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the consequent risk of increased transaction costs and risk exposure for the Danish Construction Association. In particular, the documents work description for workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthmoving contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the said standard or equivalent. If the tenderer does not meet the said standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done free of charge. Questions regarding www.udbuddet.dk should be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to carry out an inspection of the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender material.For reasons of dike safety, the contractor is obliged to pause the execution from October 2027 to February 2028, after which the work can be resumed. At the time of the publication of the tender, the Digelagat has not received a final permit from the Coastal Directorate for coastal protection, nor has the Digelagat received a discharge and land zone permit from Tønder Municipality at this time. Against this background, the Digelagat therefore expressly reserves the right to cancel the tender if final permits are not obtained. The Digelagat also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagat expressly reserves the right to cancel the tender if the Digelagat does not receive the necessary financing from Tønder Municipality for the implementation of the project, just as the Digelagat in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Danish Construction Association has not divided the tendered construction contract into subcontracts, as the Danish Construction Association assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the consequent risk of increased transaction costs and risk exposure for the Danish Construction Association. In particular, the documents work description for workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthmoving contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the said standard or equivalent. If the tenderer does not meet the said standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done free of charge. Questions regarding www.udbuddet.dk should be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to carry out an inspection of the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender material.At the time of the publication of the tender, the Digelagat has not received a final permit from the Danish Coastal Directorate for coastal protection, nor has the Digelagat received a discharge or land zone permit from the Municipality of Tønder at this time. Against this background, the Digelagat therefore expressly reserves the right to cancel the tender if final permits are not obtained. The Digelagat also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagat expressly reserves the right to cancel the tender if the Digelagat does not receive the necessary financing from the Municipality of Tønder for the implementation of the project, just as the Digelagat in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Digelagat has not divided the tendered construction contract into subcontracts, as the Digelagat assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the resulting risk of increased transaction costs and risk exposure for the Digelagat. In particular, the documents job description for workplace, job description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthwork contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the mentioned standard or equivalent. If the tenderer does not meet the mentioned standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender will be carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done at no cost. Questions regarding www.udbuddet.dk must be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to inspect the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration is not adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender materials.At the time of the publication of the tender, the Digelagat has not received a final permit from the Danish Coastal Directorate for coastal protection, nor has the Digelagat received a discharge or land zone permit from the Municipality of Tønder at this time. Against this background, the Digelagat therefore expressly reserves the right to cancel the tender if final permits are not obtained. The Digelagat also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagat expressly reserves the right to cancel the tender if the Digelagat does not receive the necessary financing from the Municipality of Tønder for the implementation of the project, just as the Digelagat in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Digelagat has not divided the tendered construction contract into subcontracts, as the Digelagat assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the resulting risk of increased transaction costs and risk exposure for the Digelagat. In particular, the documents job description for workplace, job description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthwork contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the mentioned standard or equivalent. If the tenderer does not meet the mentioned standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender will be carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done at no cost. Questions regarding www.udbuddet.dk must be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to inspect the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration is not adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender materials.The Digelagaet also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagaet expressly reserves the right to cancel the tender if the Digelagaet does not receive the necessary financing from the Municipality of Tønder for the implementation of the project, just as the Digelagaet in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Digelagaet has not divided the tendered construction contract into subcontracts, as the Digelagaet assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the consequent risk of increased transaction costs and risk exposure for the Digelagaet. In particular, the documents work description for workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthmoving contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the said standard or equivalent. If the tenderer does not meet the mentioned standard, but is equivalent, the tenderer must document in the tender that the offered solution is equivalent to the relevant parameters. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done free of charge. Questions regarding www.udbuddet.dk must be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to inspect the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may turn out to be different during execution. Therefore, the Client can also make the 3D measurements that form the basis for the quantities in the tender list available as part of the tender materials.The Digelagaet also expressly reserves the right to await the conclusion of the Contract with the winning bidder until the final permits have been obtained. Furthermore, the Digelagaet expressly reserves the right to cancel the tender if the Digelagaet does not receive the necessary financing from the Municipality of Tønder for the implementation of the project, just as the Digelagaet in this case also expressly reserves the right to await the conclusion of the Contract with the winning bidder. The Digelagaet has not divided the tendered construction contract into subcontracts, as the Digelagaet assesses that such a division would result in a number of inappropriate technical, legal and practical interfaces with the consequent risk of increased transaction costs and risk exposure for the Digelagaet. In particular, the documents work description for workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthmoving contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the said standard or equivalent. If the tenderer does not meet the mentioned standard, but is equivalent, the tenderer must document in the tender that the offered solution is equivalent to the relevant parameters. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done free of charge. Questions regarding www.udbuddet.dk must be asked directly via the support function (tel. 70227007). No remuneration will be paid for the tenderers participation in the tender process. The tenderers are encouraged to inspect the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may turn out to be different during execution. Therefore, the Client can also make the 3D measurements that form the basis for the quantities in the tender list available as part of the tender materials.legal and practical interfaces with the resulting risk of increased transaction costs and risk exposure for the Digelaget. In particular, the documents work description for the workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthwork contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the mentioned standard or equivalent. If the tenderer does not meet the mentioned standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done at no cost. Questions regarding www.udbuddet.dk must be asked directly via the support function (tel. 70227007). No remuneration is paid for the tenderers participation in the tender process. The tenderers are encouraged to carry out an inspection of the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender materials.legal and practical interfaces with the resulting risk of increased transaction costs and risk exposure for the Digelaget. In particular, the documents work description for the workplace, work description for traffic control measures, Asphalt - AAB-SAB-P, AAB-SAB-P SOS and AAB-SAB Earthwork contain a detailed description of the tasks covered by the Contract. Any reference to standards shall be understood as a reference to the mentioned standard or equivalent. If the tenderer does not meet the mentioned standard, but equivalent, the tenderer must document in the tender that the offered solution for the relevant parameters is equivalent. The tender is carried out electronically using the tender portal www.udbuddet.dk. The tenderer must therefore be registered as a licensee at www.udbuddet.dk. Registration can be done at no cost. Questions regarding www.udbuddet.dk must be asked directly via the support function (tel. 70227007). No remuneration is paid for the tenderers participation in the tender process. The tenderers are encouraged to carry out an inspection of the section where reinforcement is to be carried out. This is particularly due to the fact that the Contract is tendered with one fixed contract price without the possibility of adjustment in the event of quantity deviations. This means that the contractors remuneration will not be adjusted, regardless of whether the quantities stated in the tender list, which form the basis for calculating the fixed contract price, may prove different during execution. Therefore, the Client may also make the 3D measurements, which form the basis for the quantities in the tender list, available as part of the tender materials.may turn out differently during execution. Therefore, the Client can also make the 3D measurements that form the basis for the quantities in the tender list available as part of the tender materials.may turn out differently during execution. Therefore, the Client can also make the 3D measurements that form the basis for the quantities in the tender list available as part of the tender materials.
Frequently Asked Questions About This Tender
Who has issued this tender, and what is it for?
The tender has been issued by THE DIGEST IN THE BROAD VALLEY in Denmark. Such a type of tender falls under Reinforced-concrete structures, Dam-reinforcement works, Reinforced-concrete work, within the IT-Software sector, and is listed on Tender Impulse under notice number 712699-2026.
What are the key dates for this tender?
The notice was published on 15 Oct 2026 and submissions close on 23 Nov 2026. Late bids are rarely accepted in public procurement, so aim to have your documents ready several days before the closing date.
Which CPV codes apply to this tender?
It is classified under CPV codes 45223500, 45247212, 45262310, which correspond to Reinforced-concrete structures, Dam-reinforcement works, Reinforced-concrete work. If your company supplies these products or services, these are the codes to save in your alert profile so no matching tender passes you by.
Can I submit my bid for this tender to Tender Impulse?
No - and this matters. Tender Impulse is a tender aggregation and alert service: we collect procurement notices from official sources around the world and list them in one place. We do not receive, forward or evaluate bids. Your bid for this tender must be submitted directly to THE DIGEST IN THE BROAD VALLEY, using the method described in the original tender document, before 23 Nov 2026. Tender Impulse provides complete assistance in submitting all bids posted on its website.
How do I get the bid documents and participation details?
Request a live demo on Tender Impulse and our tender experts will walk you through this listing, share the available documents, and explain how to submit your bid to THE DIGEST IN THE BROAD VALLEY. Subscribers also receive help with registration requirements and, where needed, translation of non-English notices - but the submission itself always goes from you to the buyer.
How can I find more tenders like this in Denmark?
There are currently 1285 live tenders of 17320 total tenders from Denmark on Tender Impulse. You can browse them on our Denmark tenders page, or save a search combining Denmark with CPV codes 45223500, 45247212, 45262310 - we will then email you every new match on the day it is published.
How to prepare for this bid?
Suppliers must verify technical specifications, the delivery schedules and any other intrinsic details as provided in the complete bid documents before deciding to submit their bids. All necessary certifications and supplier registrations must be undertaken before participation.
Is this tender beneficial for me?
The procurement is applicable to companies in the Reinforced-concrete structures, Dam-reinforcement works, Reinforced-concrete work and related industries. If you belong to this industry, you can review the technical documents before assessing your relevance to your company.
What is the procurement trend for Tender for a main contract with a fixed contract price without the possibility of adjustment in case of quantity deviations regarding the reinforcement of Ballum Dige?
The public procurement trends for Tender for a main contract with a fixed contract price without the possibility of adjustment in case of quantity deviations regarding the reinforcement of Ballum Dige can be assessed by viewing historical data and buying patterns for this product. Subscribed members can view and even download reports of tenders released in the past for their market research. This shall allow them to carefully prepare a compelling bid.
Explore More Reinforced-concrete structures, Dam-reinforcement works, Reinforced-concrete work Tenders in Denmark, Europe Region and Worldwide
Looking for more tenders like this one in Reinforced-concrete structures, Dam-reinforcement works, Reinforced-concrete work? With millions of global procurement opportunities and new tenders added daily, Tender Impulse is your gateway to international and local contracting success. Whether you're targeting the IT-Software sector in Denmark, or expanding across regions, we provide live, accurate and relevant updates every day.
Our platform sources tenders from national and local government portals, international development and funding agencies, municipal corporations, state authorities, NGOs, education ministries and public-private partnerships.
Daily Tender Updates Across 190+ Countries
Every day we add hundreds of new RFPs, RFQs, EOIs and contract awards across multiple sectors and geographies. This tender from Denmark is just a sample of what's available right now - there are currently 1,285 live Denmark tenders to explore.
Search Smarter with CPV and Industry Matching
Each listing is categorised using CPV codes such as 45223500, 45247212, 45262310, enabling precise filtering by tender type, location, industry, deadline and issuing organisation.
Start Your Tender Journey
Request a free live demo to unlock tenders customised to your sector, country and CPV categories - with alerts, documents and submission support.